B36bt830ns Parts

The Freezer Clip is an OEM part for Bosch refrigerators. It is designed to secure various components within the freezer compartment, ensuring they remain in place during regular use and while opening and closing the freezer door.

Causes of a bad freezer clip can include wear and tear over time, breakage due to handling or impact, or exposure to extreme temperatures that cause the clip to become brittle and snap. Ensuring the clip is intact and functioning properly is essential for maintaining the organization and efficiency of the freezer space.

Symptoms of a bad freezer clip include:

• Items or shelves in the freezer becoming dislodged
• Difficulty in keeping freezer components in place
• Unusual noises from components moving within the freezer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This sensor monitors operating conditions inside the appliance and reports to the control so cycles run correctly and safely. When the sensor fails, the control may receive inaccurate feedback, leading to irregular performance. What it does:

• Detects key conditions inside the appliance and sends a signal to the control
• Helps the control regulate heat and cycle progress
• Failure symptoms can include erratic cycle times, poor heating performance, or sensor-related error messages
• Can prevent the appliance from starting or completing a cycle if readings are out of range

• 1 sensor

• Disconnect power before servicing; shut off water supply if applicable
• Access the sensor and note wire orientation before removal
• Ensure any sealing surface is clean and the sensor is seated properly; check for leaks after reassembly where applicable
• Run a diagnostic or test cycle after installation to clear errors and verify operation

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

The Freezer Door Gasket is an OEM replacement part for Bosch refrigerators. As a thin, foam sealing ring located around the inside perimeter of the freezer door, it creates an airtight barrier preventing cold air leakage. The door gasket withstands temperature fluctuations from frequent openings and closings.

Causes of a bad freezer door gasket can include cracks or splits due to normal drying and usage over time, or accidental damages compromising the seal.

Symptoms of a bad freezer door gasket include: 

• Inability to maintain proper freezer temperature levels  
• Frost buildup indicating cold air leakage issues
• Higher energy bills from the refrigerator working harder
• Potential ice or frost accidentally falling upon door opening  

Replacing your worn or damaged gasket helps restore efficient cooling performance. This genuine Bosch part ensures continued reliability while preventing loss of cold air and energy costs. It is also compatible with Thermador, Gaggenau and select Kenmore units.

The Ice Maker is an OEM part for Bosch refrigerators. Located inside the freezer compartment, it automatically produces batches of bullet-shaped ice using an integrated mold and water supply. After each cycle, the ice maker distributes perfectly formed ice cubes into the storage bucket for easy access.

Causes of ice maker issues involve failures within the mold assembly, water control valves or electrical components over time due to repeated use. Mineral buildup from hard water sources can also clog mechanisms.

Symptoms of a bad ice maker include:

• Incomplete or inconsistent ice production
• Jammed or overflowing ice molds
• Cracked cubes or foul-smelling ice
• Water dripping from the unit

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Inlet Valve is an OEM replacement part for Bosch refrigerators. It is responsible for controlling the flow of water to the ice maker and dispenser. Over time, inlet valves can fail due to mineral deposits, solenoid failure, or plastic housing cracks. 

Symptoms of a defective inlet valve include: 

• No water dispensing 
• Slow dispensing
• Leaks
• Ice maker not making ice

The inlet valve is compatible with Bosch, Thermador, Gaggenau and some Kenmore refrigerator models.

This control unit is the appliance's primary electronic board. It manages power distribution and operating logic so the machine responds to the controls and runs correctly. Replacing a failed board restores reliable operation of key functions.

• Coordinates operating logic and timing for selected functions
• Monitors sensor/switch inputs and energizes outputs to run components as needed
• Distributes power to critical loads and communicates with the user interface
• Common failure symptoms: no power or won't start; unresponsive controls; stops during operation; intermittent behavior; error codes

• Disconnect power at the breaker or unplug the appliance before service; verify no voltage is present
• Use ESD precautions and handle the board by the edges only
• Photograph wiring and move connectors one at a time to matching terminals

This manufacturer-specified service tool is used to perform installation or repair steps exactly as described in the service manual, helping you remove, adjust, or install designated components safely and without damage.

• Purpose-built tool referenced in OEM service/installation instructions
• Provides the correct interface or leverage for the specified procedure
• Helps prevent damage to fasteners and surrounding parts during service
• Use only when the model's documentation calls for this specific tool

• Disconnect power and shut off gas/water before servicing
• Follow your model's service or installation manual for the exact procedure
• Wear cut-resistant gloves and eye protection
• Do not force the tool; stop and recheck alignment if it does not fit as expected

This connection piece is the small inline connector that joins internal hoses or water-path components inside your appliance. It restores a secure, sealed fit to help prevent leaks and maintain proper water flow during operation. What it does:

• Creates a tight, sealed connection between hoses or assemblies in the water path
• Helps resolve leaks or drips at a hose joint
• Replaces cracked, warped, or broken connector fittings
• Addresses fill/drain issues caused by a loose or leaking connection

• 1 connection piece

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Note hose routing/orientation and clamp positions before removal
• Push hoses fully onto fittings and secure with clamps; test for leaks after reassembly

The Bypass Filter is an OEM part for Bosch refrigerators that use a water filtration system. This bypass filter is used when you choose not to filter the water through the refrigerator’s built-in water filtration system. It is ideal for situations where the household water is already adequately filtered, or when using filter cartridges is not preferred. 

Causes for the need of a bypass filter include wanting to use pre-filtered water or reducing the costs associated with frequent filter changes.

Symptoms of a bad or missing bypass filter include:

• Poor water dispensing or ice production
• Water leakage or dripping from the dispenser area
• Unusual noises from the dispenser when attempting to use water or ice

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This defrost heater melts frost from the evaporator during the automatic defrost cycle to restore airflow and stable temperatures. Replacing a failed heater stops ice buildup on the coils and helps your refrigerator cool reliably. What it does:

• Heats the evaporator coils to clear frost/ice during defrost
• Restores proper airflow for consistent refrigerator and freezer temperatures
• Helps prevent ice forming on the back panel/evaporator cover
• Common symptoms of failure: heavy frost on coils, poor cooling or warming, fan noise from ice contact, recurring frost soon after manual defrost

• 1 defrost heater

• Disconnect power before servicing; wear cut-resistant gloves
• Access is behind the freezer/evaporator cover; remove shelves/drawers and rear panel as needed
• Carefully release the heater from clips/retainers; avoid bending evaporator tubing or damaging fins
• Transfer any clips/insulators from the old part and fully seat connectors; also test the defrost sensor/limit and control

The Water Filter Cap is an OEM part for Bosch refrigerators. This secures the water filter within the refrigerator, ensuring a snug and leak-free fit. 

The need for a replacement can arise if the original cap is lost during a filter change, damaged, or wears out over time. 

Symptoms of a missing or damaged Water Filter Cap include:

• Difficulty in installing or securing the water filter properly, which could lead to water leaks inside the refrigerator.
• Contaminants or particles in the dispensed water, indicating that the filter is not fully sealed and thus not effectively filtering the water.
• The water filter becoming loose or falling out, compromising the refrigerator's ability to provide clean, filtered water.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation

This NTC temperature sensor measures appliance temperature and sends resistance-based readings to the control board so the appliance can monitor and regulate heating or cooling for proper operation and cycle control. What it does:

• Detects internal air or component temperature and converts it to a resistance signal for the control board.
• Helps the appliance maintain correct temperatures during heating, cooling, or drying cycles.
• Commonly linked to symptoms like incorrect temperature, extended cycles, or temperature-related error codes.
• Failsafe for sensing — a damaged sensor can cause erratic operation or prevent normal cycle completion.

• Disconnect power before accessing or replacing the sensor to avoid shock or damage.
• Handle the sensor and wiring gently; avoid bending or crushing the sensing tip.
• Verify proper connector seating and routing to prevent pinching; confirm electrical continuity with a multimeter if needed.
• For exact sensor location and replacement procedure.

The Motor-Fan is an OEM component specifically designed for Bosch refrigerators. It circulates air to optimize internal temperatures.

The motor-fan works continuously to push cool air from the freezer compartment and direct airflow throughout refrigerator shelves and bins. Strategically positioned vents help regulate temperature variances. 

Symptoms of a bad motor-fan include:  

• Inconsistent or fluctuating temps from section to section
• Frost or condensation building up unusually fast 
• Abnormal sounds like grinding or squealing during the operation
• Complete lack of airflow

Causes can be a failed motor bearing, compromised fan blades off balance, or blockage preventing free rotation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models.
 

The Door Stopper is an OEM part for Bosch refrigerators. It is a component located on the freezer door that prevents the door from opening beyond 90 degrees. The door stopper is designed to provide stability and safety by limiting the door's range of motion. 

Symptoms of a bad door stopper include:

• The refrigerator door opening past 90 degrees and damaging other interior parts
• Difficulty closing the door fully 
• Excessive movement or wobbling of the door
• Improper sealing when closed

Causes of a bad door stopper may include damage from repeated impacts as the door is opened and closed, wear and tear over time, or failure of the stopper's locking mechanism. 

This replacement part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerators.