Cdt725ssfss Parts

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

This console top control is the electronic control panel that operates oven and cooktop functions, providing user input, display readouts, and mode selection for safe, accurate cooking and timer control. What it does:

• Registers button presses and touch inputs to start, stop, or change oven/cooktop cycles
• Displays clock, temperature, timer, and error codes for troubleshooting
• Manages oven bake/broil and timed cooking sequences when communicating with the range control board
• Common symptom when failing: unresponsive buttons, blank or erratic display, or inability to select oven functions

• One console top control assembly

• Disconnect power to the appliance before starting to avoid shock or injury
• Handle the control and display lens carefully to avoid scratching or damaging the keypad
• Installation typically requires removing the console trim and disconnecting/reconnecting the wire harness; keep track of mounting screws
• After installation, restore power and test all functions; if problems persist, verify connections and complementary control boards

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This right-hand hinge friction pad assembly controls door swing and provides a smooth, stable stop for the appliance door, helping keep it open at set positions and reducing wear on the hinge. What it does:

• Provides friction at the right-hand door hinge to help hold the door open and control closing speed
• Reduces metal-on-metal contact and noisy hinge operation when installed properly
• Helps prevent the door from swinging shut unexpectedly or sagging at the hinge
• Worn or damaged pads can cause uneven movement, noise, or difficulty keeping the door in position

• Disconnect power (unplug or switch off circuit) before starting work and follow all safety guidance
• Support the door while loosening hinge fasteners to prevent sudden movement or damage
• Use appropriate hand tools; avoid over-tightening fasteners when reinstalling to preserve pad function
• Inspect hinge mating surfaces and hardware for wear; replace any damaged components as needed

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the door balance cable assembly for a dishwasher. It links the door hinge to the tension spring so the door opens smoothly and stays balanced, helping prevent a heavy or slamming door.

• Connects the door hinge to the spring to counterbalance door weight
• Helps the door open/close smoothly and stay in position
• Common failure symptoms include a door that drops quickly, feels heavy, or won't hold half-open
• A snapped or frayed cable may be visible near the lower side of the cabinet

• Disconnect power and shut off water before servicing
• Support the door and use caution—hinge springs are under tension
• Note the original cable routing over pulleys and through guides; reinstall the same way
• Some models use a cable on each side; check your model and order quantity as needed

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This striker latch secures the dryer door so the machine can run and maintain a proper seal during operation. It replaces a worn or broken striker to restore reliable door closure and normal cycle starts. What it does:

• Provides a catch point for the dryer door so the door stays firmly closed during operation.
• Helps the dryer detect a closed door and start/complete cycles; a damaged striker can prevent the dryer from starting.
• Prevents door rattling or intermittent opening during use.
• Restores proper door alignment and sealing when the original striker is bent, broken, or worn.

• One striker latch

• Disconnect power to the dryer before starting any repair.
• Remove the dryer front or door trim as needed to access the striker; retain original fasteners.
• Inspect the door strike mounting area and replace any stripped screws or damaged trim.
• After installation, test the door operation and run a short cycle to ensure proper function.