Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven won't heat or takes too long to preheat? This glow bar igniter lights the gas burner. Common fix for no bake heat or igniter glows but gas won't ignite.
I was able to replace the glow bar by myself very easily. Read more
Bottom oven cavity and heat deflector assembly. Replace when damaged from spills, if deflector is melted, or igniter fails repeatedly. Verify fit with model.
Ordered everything from AppliancePartsPros.com and they were helpful, reliable and friendly in our interactions. Can't recommend them more for a vendor. First go get a ton of stainless steel sheet metal screws - about 20 phillips head and 20 nut driver. a drill with a phillips bit and a nutdriver bit and a zip tie and a phillips screw driver and a socket and an extension bit. Second - unplug your stove, turn off the gas valve on back of the stove and pull it away from the wall so you can... Read more
Decorative trim skirt that fits around range control knobs on the front panel. Replace if cracked, disintegrating, melted, or missing for a clean look.
Replaced the ignitor glow bar and deflector oven (which had a hole burned through it). Screws stripped upon disassembly of original deflector oven and needed to be replaced as well. Read more
Replace worn, cracked, or missing bumpers on your range oven drawer. Cushions the drawer to prevent noise, vibration, and wear during regular use.
Looked for the parts at this site and ordered those need plus spares Read more
Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.
Just set them on the tops of the burners.. Read more
Fixes warped or melted oven bottom panels that trip circuit breakers. This assembly includes the cavity floor and heat deflector shield. Moderate DIY.
Somehow the igniter was getting hot enough to melt the flame spreader pan right above it. Over time the flame spreader melted down till it was coming into contact with the igniter. Not sure if it was an actual electric short, or something else that was caused from the contact between the two, but shaved the melted area down and no more tripped circuit breaker. replaced the panels with new stock and will check back again in a month. Read more
Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.
Replaced burner assembly Read more
Burner control knob for gas and dual fuel ranges. Installs on the control panel. Replace if knob is cracked, broken, won't turn properly, or missing.
I bought the replacement knobs from Appliance Parts Pros.com and they were much better knobs that what originally came with the unit. They are actually metal and the plastic posts that connect with the range are a much higher grade plastic. To be honest I think the stove works better than it did when it was new. Some of the original knobs may have been broken when we purchased the unit. Replacement took under 5 minutes for all of the knob. Oh....and by the way....they appear to be the same... Read more
Replacement leveling leg for ranges. Installs at base corners to stabilize and level your range on uneven floors. Needed when leg is broken or missing.
Raised stove to access front levelers. Installed new within 20 minutes. Very pleased with your company as I ordered my parts one day and received them the very next day! Great company to deal with. Read more
Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.
Fixes weak or uneven flames on high-output burners. This triple ring burner head restores powerful heat and smooth simmering. DIY-friendly repair.
Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.
Replaced spark module and all electrodes/igniters. Read more
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.
I bought a new orifice and installed it. Read more
Mounting nut secures the convection fan blade to the motor spindle. Replace if lost, stripped, or damaged during fan service or repair work.
I took the cover off and the fan had separated from the bushing. Ordered a new fan and nut and it took all of 5 minutes to replace. Probably saved $159.99 service call repair and that is with a coupon. Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts. Read more
LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.
AppliancePartsPros identified problem and needed parts. Repairman installed new spuds. Read more