Dbxr453et5ww453et3ww Parts
Genuine Ge part
By: Ge
Part Number: WE2M163
Secures the dryer drum to the rear bearing assembly. Replace if missing, stripped, or damaged to properly mount and stabilize the drum during operation.
Do-It-Yourself Stories from Customers like You
Missing a dryer drum screw Robbie B. • San Luis Obispo , CA • October 24, 2016
Replaced the screw
Read more
More
$8.29
- Compare At:
-
$8.75
- You Save:
-
$0.46
Genuine Ge part
By: Ge
Part Number: WE1M1033
Replacement door hinge that supports and pivots your dryer door for smooth opening and closing. Install when original hinge is bent, worn, or broken.
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WE20X20417
White cover panel that installs on top of your dryer cabinet. Replace if cracked, rusted, loose, or missing to restore a clean appearance.
Do-It-Yourself Stories from Customers like You
Due to a leak in my laundry room the top of my dryer starting to rust in a tiny spot which lead to a much larger area Darlene A. • Riverhead , NY • January 27, 2019
I watched a YouTube video how to remove the top of my dryer cover. It just required removing a few screws.
Read more
More
$74.23
- Compare At:
-
$87.59
- You Save:
-
$13.36
Genuine Ge part
By: Ge
Part Number: WE4M188
Fix a dryer that won't shut off automatically or only works on timed dry setting. This electromechanical timer is a straightforward 10-minute repair.
Do-It-Yourself Stories from Customers like You
Dryer was not shutting off Mark S. • Yonkers , NY • June 08, 2016
Bought a new timer switch, 2 minute install, waalaa....fixed....easy as pie!
Read more
More
$171.95
- Compare At:
-
$204.62
- You Save:
-
$32.67
Genuine Ge part
By: Ge
Part Number: WE1M642
Adjustable leveling leg that installs on the bottom of your dryer to stabilize and level the unit. Replace missing, broken, or worn legs. Easy DIY.
Do-It-Yourself Stories from Customers like You
Dryer missing 2 front floor levelers Walter G. • Ocean , NJ • September 14, 2014
Ordered 2 floor levelers based on my dryer make and model number.
Read more
More
$14.37
- Compare At:
-
$17.10
- You Save:
-
$2.73
Genuine Ge part
By: Ge
Part Number: WE2M173
Replacement screw for securing dryer components like drum supports, panels, and housings. Needed when screws are lost, stripped, or damaged during repair.
Do-It-Yourself Stories from Customers like You
Plastic dryer drum support was disintegrating causing squeaking of drum when operating. Irene S. • Riverside , CT • January 17, 2021
Replaced front dryer drum support and lint trap duct as both were disintegrating with multiple cracks. While not as easy for me as in the videos, as placement required a little more jostling of the parts to place and fit snugly, the videos were amazingly helpful and I would never have accomplished the repair without them. I used a Phillips head and a screwdriver. Great experience dealing with customer service as well, as 2 extra wires were sent with the lint trap assembly which my older model...
Read more
More
$9.20
- Compare At:
-
$10.07
- You Save:
-
$0.87
Genuine Ge part
By: Ge
Part Number: WE1M468
Rear leveling leg and bracket assembly for dryers. Replaces damaged, broken, or missing legs. Ensures proper dryer stability and level positioning.
Do-It-Yourself Stories from Customers like You
Dryer needed foot Joshua C. • Garden Valley , CA • May 17, 2015
Bought foot and put it on dryer
Read more
More
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Genuine Ge part
By: Ge
Part Number: WE49X22295
Replaces damaged outer and inner door panels to restore appearance and maintain proper door alignment. Replace if panels are cracked, warped, or dented. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Sig other had continued to operate dryer until it ate through the side of the cabinet and into the front door (destroying all the plastic parts in the process) Jim S. • Horseheads , NY • September 21, 2018
Replaced front panel and inner liner of door (kit), trap duct assembly, both bearing slides (gray and white), and drum front support bearing. Procedure is pretty much what one sees in the video clips. Exceptions in our case included:
1. The fact that our door latch¹ was on the front panel while the door strike² was on the door. The newer (replacement) design has the latch on the door and the strike on the front panel!
2. The new door did NOT have the door latch installed (as shown in the...
Read more
More
$253.95
- Compare At:
-
$285.10
- You Save:
-
$31.15
Genuine Ge part
By: Ge
Part Number: WZ4X241D
Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.
Do-It-Yourself Stories from Customers like You
We didn't have a power cord for our dryer Heather B. • Dulce , NM • October 27, 2018
Ordered the cord through appliance parts pros, with additional screws and it works! Yay after waiting months and everywhere was out. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE1M280
Replacement mounting screw for dryer panels, brackets, and components. Needed when screws are missing, stripped, or damaged during repairs or disassembly.
Do-It-Yourself Stories from Customers like You
The original problem was that the drum would quit turning during drying operations. Randall B. • Moab , UT • April 08, 2018
Upon examination of the dryer, I noticed that the belt was intact, though a little worn and hard. However, I noticed that the belt had came of the idler pulley. So I put it back on and had the owners try it out on their next load of wash. It, once again failed to keep the drum turning. So I ordered a new belt and idler pulley (order # 8676164). I found it necessary to remove the drum, in order to change out the new pulley. However, while trying to reinstall the drum, we damaged some of the...
Read more
More
$8.39
- Compare At:
-
$9.98
- You Save:
-
$1.59
Genuine Ge part
By: Ge
Part Number: WE13X200
Secures the drive motor to its mounting bracket. Replace if cracked, broken, or missing to keep the motor and blower aligned and stable during operation.
More
$8.29
- Compare At:
-
$9.08
- You Save:
-
$0.79
Genuine Ge part
By: Ge
Part Number: WE2M196
Replacement screw for securing dryer panels and internal components. Restores proper fit when original screws are stripped, missing, or damaged.
More
$10.53
- Compare At:
-
$12.53
- You Save:
-
$2.00
Genuine Ge part
By: Ge
Part Number: WR2X9260
Factory replacement screw for securing dryer panels, brackets, and components. Restores lost or loose hardware to eliminate rattling and ensure proper fit.
More
$25.41
- Compare At:
-
$30.49
- You Save:
-
$5.08
Genuine Ge part
By: Ge
Part Number: WE12X41
Replaces a worn, damaged, or misaligned dryer motor pulley. Guides the drive belt and transfers motor power to the drum for proper rotation.
Do-It-Yourself Stories from Customers like You
Broken belt Richard B. • Fairfield , CT • March 14, 2015
Replaced belt, pulley with a 4 grove pulley. Pulley that was on there was a 3 grove pulley, Had to cut the old one off, Press on to shaft.
Replaced rear drum bearing. Bearing was locked on with a snap ring. Access to it from a removable plate on the back side of dryer.
Reset belt and idler puller by removing a long back plate on the bottom rear side of the dryer.
None of this was shown in your Video.
Read more
More
$27.25
- Compare At:
-
$32.43
- You Save:
-
$5.18
Genuine Ge part
By: Ge
Part Number: WE1X1172
Ground strap assembly connects drum shaft to dryer frame for electrical safety. Replace if damaged, corroded, or causing startup squealing noise.
Do-It-Yourself Stories from Customers like You
Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016
My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ...
Read more
More
$27.28
- Compare At:
-
$32.46
- You Save:
-
$5.18
Genuine Ge part
By: Ge
Part Number: WE13M39
Metal bracket that secures the dryer motor and blower assembly in place. Replace if your mounting bracket is cracked, broken, or causing loose components.
More
$39.45
- Compare At:
-
$46.95
- You Save:
-
$7.50