Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures door stop to hinge bracket, controlling opening angle. Replace if pin is bent, broken, or missing to restore smooth door operation.
Removed door and replaced bottom bearing. Read more
Bearing insert for freezer door hinges. Replaces worn or damaged bearings that cause stiff door operation or poor alignment. Installs in hinge bracket.
Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more
Display segments dark or touch panel unresponsive? This electronic control assembly manages temperature and defrost cycles. Simple 5-minute snap-in repair.
Ordered new control panel pulled out plug plugged in replacement panel and snapped back into door. Took less than 5 min cost less than $100. Read more
Fixes uneven cooling or warm top shelves in freezers. This blower wheel restores proper air circulation when the fan stops moving cold air effectively.
Replace condenser motor fan blade. Read more
Supports and pivots the freezer door at the top hinge point. Replace this hinge if cracked, broken, or worn to restore proper door alignment and swing.
Ordered the parts from AppliancePartsPros after another outlet had me on back order. The parts arrived and I installed them. We now are using our freezer. Read more
Freezer won't stay cold or runs too cold? A faulty heat exchanger disrupts refrigerant flow. Requires professional brazing and refrigerant recharge.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Carries defrost water from your freezer drain outlet to the drip pan. Replace if cracked, kinked, or detached to prevent leaks onto floors and cabinets.
Ordered a replacement Drain Hose. $9.95 shipping seems high for a $5.55 part but it was delivered next day. This was better than promised!!! I pulled of the old hose and replaced it with the new. No tools required. Working like a charm. Read more
Supports and pivots your freezer door for smooth opening and closing. Replace when worn or bent to restore proper alignment, improve sealing, and prevent air leaks or frost buildup. Confirm fit by model number.
Replacement power cord that delivers household electricity from wall outlet to your freezer. Needed when original cord is damaged, frayed, or has broken prongs.
I placed a order for a replacement cord. It was an exact fit. Whole process was about 10 minutes max. Read more
Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Seals the evaporator cover to prevent air leaks, frost buildup, and temperature fluctuations. Replace if worn or cracked. Verify fit with your model.
Volt Ohmmeter test indicated defrost thermostat and heater were OK. Defrost voltage measured ~25 VAC. I ordered all the most likely repair parts, but thought the control board had failed. I replaced the control board and the freezer has been working properly for several days. I haven't decided whether to keep or return the unused parts. I damaged the paint removing the electrical control. There must be a trick to protect the paint from the putty knife and screwdriver. Read more
Alignment sleeve bushing maintains smooth part movement in freezers and refrigerators. Replace when worn to eliminate play and restore operation.
Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.
Replaced the handle. Read more
Powers your refrigerator's interior lighting. Replace when lights dim, flicker, or fail. Confirm fit with your model number before ordering.
Go the part number from the owners manual. Looked it up online, ordered it, got it in a few days,unplugged it, plugged the new one in! Very easy! Thanks Read more
Secures the door gasket to your freezer lid or door panel. Replace when broken or missing to maintain proper seal. Verify fit with your model number.
I took it apart myself by just un-doing screws and taking it apart. Reversed the process to put it back together. Read more