Flcg7522aw2 Parts

The Nut is an OEM part for Frigidaire washers. It secures the washer's motor in place, ensuring stability and proper functioning during operation.

A bad nut can be caused by wear and tear, damage, or improper installation. Signs of a faulty nut include the motor becoming loose, excessive vibration during operation, or unusual noises coming from the washer.

Symptoms of a bad lock nut include:

• The motor becoming loose or shifting position 
• Excessive vibration or shaking of the washer
• Unusual noises coming from the washer

Replace your worn-out or damaged nut with this genuine OEM part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

Self leveling leg pad

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

This is a flat metal washer used as a load-distributing spacer in appliance assemblies. It helps keep fasteners seated and reduces wear between mating parts for reliable mechanical fit and alignment. What it does

• Distributes load from a nut or bolt to prevent pull-through and improve joint stability
• Maintains proper spacing and alignment of assembled components
• Reduces friction and wear between parts that rotate or clamp together
• Helps prevent fasteners from loosening under vibration or movement

• One flat washer

• Inspect mating surfaces and replace any damaged hardware before installing the washer
• Use the washer with the specified bolt/nut size and torque per manufacturer guidance
• Wear safety glasses and disconnect power to the appliance if working near electrical components

This outer trim cover replaces a worn or damaged cosmetic panel to restore a clean appearance and protect underlying components from dirt and debris. It's a simple, direct replacement that keeps the appliance looking and functioning as intended. What it does:

• Covers and protects internal components and wiring from dust and spills
• Restores the appliance's finished appearance after damage or wear
• Helps maintain proper airflow/clearance around controls or openings
• Prevents accidental contact with underlying fasteners or edges

• One outer trim cover

• Disconnect power to the appliance before attempting any service
• Installation typically requires removal of adjacent trim or fasteners; retain all screws
• Handle cover edges carefully to avoid scratches; use soft cloth if needed
• If any clips or fasteners are damaged, replace them to ensure secure fit

The  Bracket assembly is an OEM replacement part for Frigidaire washing machines. This bracket assembly contains an arm that detects any out of balance vibrations in the washing tub during the spin cycle. If excess vibrations are sensed, the arm will trip an internal switch to stop the cycle and prevent potential damage.

Symptoms of a bad bracket include: 

• Inability to complete high-speed spin cycles
• Premature ending of the spin portion of cycles  
• Error codes related to tub imbalance
• Excessive shaking felt in the washer cabinet or surrounding floor area

Causes of failure can be worn or loose mounting points that reduce the arm's sensitivity over time. Constant back-and-forth movement also causes fatigue that impairs the bracket's balance detection capabilities.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Hex washer head ,10-32 x 0.375. Ground

This control panel is the appliance's front user interface, replacing a cracked, faded, or non-functioning console to restore a clean appearance and reliable control operation. It fits into the range/oven console and accepts the overlay and switches. What it does:

• Provides the front surface and mounting for the oven/range controls and display
• Restores a secure mounting point when the original panel is cracked, bent, or missing
• Can resolve cosmetic issues and stop loose or rubbing controls from sticking
• Helps prevent debris from reaching internal electronics behind the console

• Disconnect power to the appliance before beginning any work
• Removal typically requires unscrewing trim and console fasteners; handle edges carefully
• Keep small screws and clips organized for reassembly; some panels use snap clips that can break if forced

This idler arm assembly restores proper dryer belt tension so the drum turns smoothly and reliably. It replaces a worn or damaged tension arm to help eliminate belt slipping and abnormal noise. What it does:

• Acts as the dryer belt tensioner to keep the drive belt properly seated on the drum and motor pulley
• Prevents belt slipping that can cause the drum to stop turning or to turn intermittently
• Reduces squealing, grinding, or rubbing noises caused by a worn or loose idler
• Helps extend belt life by maintaining correct alignment and tension

• One idler arm assembly

• Disconnect power to the dryer before starting any repair
• Access may require removing the dryer front or rear panel depending on model
• Inspect the belt and pulley(s) while replacing the arm; replace worn belts or pulleys as needed

A small locating pin used to align and secure parts during assembly, helping panels and components sit correctly for reliable operation. Ideal when a worn or missing pin causes fit or alignment issues. What it does:

• Positions and holds panels, trim, or assemblies in the correct location during reassembly
• Prevents shifting or misalignment of covers and access panels
• Restores proper fit where a bent, broken or missing pin causes loose trim or gaps
• Small, simple replacement that addresses common fit/fitment symptoms

• Disconnect power and unplug the appliance before beginning any work
• Use basic hand tools; avoid forcing parts into place to prevent damage
• Inspect surrounding components for damage and replace if worn

Pan hd phillips ,6-32 x 0.337 ,dog point