Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix ice dispensing issues caused by bent or dull crusher blades. This blade restores smooth crushed-ice flow. Quick DIY replacement with video guide.
I ordered (3) new replacement blades and received them in two days! Read more
Ice not dispensing or jamming? A worn auger can't move cubes from bin to chute. This rotating shaft restores smooth dispensing. Moderate DIY repair.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
Ice dispenser not dispensing or crushing properly? The drive cam transfers motor rotation to advance the ice dispensing cycle. DIY repair in 30-45 minutes.
Front cover for your refrigerator's ice bucket. Replaces cracked, broken, or missing covers to keep ice contained and ensure proper dispenser seating.
I ordered the parts needed from you and they arrived quicker than promised. your chat person was extremely helpful in finding the correct parts needed. Great service Read more
Freezer drain tube that channels defrost water from the drain pan to the drip pan. Replace if cracked, leaking around the grommet, or causing floor leaks.
Replaced it Read more
Refrigerator not cooling or running warm? This compressor kit restores proper cooling when the compressor fails. Professional installation recommended.
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
If your crushed ice comes out in large chunks or clumps, this fixed blade may be worn or broken. Works with the auger to deliver consistent crushed ice.
Spacer that fits between refrigerator door hinge components to maintain proper clearance and alignment. Replace if worn, cracked, or missing.
Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.
Secures ice crusher components in place. Replace if pin is worn, missing, or broken to restore proper alignment and operation of crusher assembly.
Replaced several Ice Container crusher blade parts. Read more
Replaces discontinued water tanks in refrigerators. Includes tubing, connectors, and screws to convert from old tank system. Needed when original tank is cracked or leaking.
I watched your video on YouTube and it was super easy after that, thank you for making this video. Read more
Left-hand freezer basket track guide rail for refrigerators. Replace broken, cracked, or missing basket hangers to restore proper basket support.
I bought this part to fix the basket hanger on my Mom's fridge. It worked perfectly. The only thing to know about the pic of part is it says it is left side hanger and it is but the pic is confusing. I had to print out the pic and turn the pic upside down to make sure it would work on the correct side for the fridge. It is truly the left side but the pic makes it look like it is the right side hanger. Confusing, I know but for it to actually show it is the left side the image of the part... Read more
Refrigerator spacer maintains proper clearance and alignment between internal parts. Replace if worn, missing, or causing parts to rub or bind together.
Retaining clip secures ice maker auger shaft assembly. Replace if clip is missing, bent, or broken causing auger misalignment or loose components.
Replaced auger nut , washer, and e-ring on end of auger. This allowed the auger to rotate correctly, and not "rub" the sides of the ice dispenser housing. Read more
Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.