Gdp280edoww Parts

This is a replacement lever latch that secures and releases the appliance door so it closes and opens properly. It restores a worn, broken or cracked lever to help the door latch reliably. What it does:

• Replaces a damaged or worn door latch lever that prevents the door from engaging
• Allows the latch assembly to release so the door can open smoothly
• Common symptom: door won't stay closed, won't latch, or feels loose when closing
• Works as the user-operable lever portion of the door latch mechanism

• Disconnect power (and water if applicable) before servicing the appliance
• Typically snaps or screws into the latch housing—retain fasteners and note orientation
• Inspect latch housing and striker for damage and replace if necessary

This is a replacement sheet-metal screw used to secure panels and components on compatible Whirlpool appliances. It provides a reliable fasten point for reattaching trim, brackets, and access panels after service. What it does:

• Secures appliance panels, brackets, and smaller components to the cabinet or frame
• Helps restore original fit and finish after repairs or part replacement
• Prevents rattles or loose panels when properly installed
• Matches OEM thread size and head style for a correct fit

• Turn off and unplug the appliance before removing panels or installing hardware
• Use the correct driver bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing to prevent thread damage or warped panels

This is a replacement screw used to secure appliance panels and components. It restores proper fit and prevents loose parts that cause vibration, rattling, or misalignment for a tighter, safer assembly. What it does:

• Secures covers, trim, brackets, or control panels to the appliance frame
• Keeps components aligned to prevent rattling and movement during operation
• Replaces stripped, missing, or damaged fasteners that compromise fit
• Helps restore structural stability for normal operation

• Disconnect power and turn off water supply before beginning any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Hand-start the screw and tighten until snug; avoid over-tightening which can crack plastic or strip threads
• If threads are damaged, replace with correct OEM fastener.

This replacement lower dishrack restores smooth rolling and secure loading on the bottom level of your dishwasher, helping plates, bowls, and pots stay in place for consistent spray coverage and reliable cleaning results. What it does

• Organizes and supports dishes, cookware, and utensils on the lower level during wash and dry cycles
• Rolls in and out on the tub rails for easy loading and unloading
• Positions items for effective spray coverage and drainage
• Replace if tines are broken, coating is peeling/rusting, the rack derails or won't roll smoothly, or items tip over

• One lower dishrack

• Turn off power to the dishwasher before servicing
• Pull the old lower rack straight out; release/remove any rack stops if present
• Transfer any removable accessories from the old rack (such as utensil basket or clips), if needed
• Slide the new rack onto the rails and verify smooth operation

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Diverter Assembly is an OEM part for GE dishwashers. It is a water flow management component that directs water via internal channels and ports to target specific spray arms and jets during various wash cycles. 

Symptoms of a faulty diverter include:

• Inconsistent or inadequate rinsing  
• Reduced cleaning power on certain sections of dishes
• Odd noises coming from inside the dishwasher 

Causes can be mineral buildup clogging water passages, worn diverter vanes, or cracks in the assembly housing allowing leakage.

Properly replacing with the authentic GE OEM part restores like-performance water distribution. With uniform coverage, all dishes receive thorough cleaning and drying. Compatible with Hotpoint, RCA, and Kenmore models.

The Turbidity Sensor is an OEM part for GE dishwashers. It is a water quality monitor that detects small food particles in the rinse water during dishwashing cycles. The sensor plays an important quality control role by ensuring water has achieved the necessary clarity before terminating the rinse phase.

Symptoms of a bad turbidity sensor include:

• Incomplete or unsatisfactory rinsing results
• Cycles not advancing properly beyond the rinse stage
• Error codes related to turbidity detection

Causes can be mineral deposits interfering with the sensor's ability to transmit light through the water, or failure of the electronic components over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fine Filter is an OEM part for GE dishwashers. Located at the bottom of the dishwasher tub, the fine filter traps small food particles and debris to prevent clogs in the wash pump and other components. It is a critical filter that helps optimize cleaning performance and protect internal mechanisms.

Symptoms of a bad fine filter include:

• Reduced or inefficient water spraying from the arms  
• Accumulation of debris inside the tub
• Foul odors emitting from the dishwasher
• Drainage or water flow issues 

Over time, particles can accumulate in the fine filter mesh causing it to become clogged. Choosing this genuine GE replacement ensures optimal filtration. It upgrades your dishwasher with a new filter to once again trap particles and keep the wash system running smoothly. This OEM GE part aligns with specifications for Crosley, KitchenAid, and select Kenmore dishwashers as well.
 

TRANSITION PIECE ASM

The Pulley Cable is an OEM part for GE dishwashers. As a component for proper door operation, the pulley cable works with internal springs to balance the door during opening and closing movements. 

Symptoms of a bad door pulley cable include:

• The door lacks proper closing assistance and slams shut  
• Difficulty opening or requiring extra force to move the door
• Door unable to fully latch or lock into position

Causes can be fractures in wire strands weakening cable strength over thousands of uses. Extreme bends also damage internal wiring over time. 

This OEM part is compatible with select Hotpoint, RCA, and Kenmore models, 

This upper rack is a direct-fit replacement that restores the top-level dish storage area and allows safe, secure loading of cups, glasses and small bowls. It brings back proper rack support and organization for everyday dishwasher use. What it does:

• Supports cups, glasses and small dishes on the top rack to improve loading capacity and wash coverage
• Restores smooth sliding and proper alignment of the upper rack assembly
• Helps prevent items from tipping or blocking spray arms when the rack is installed correctly
• Addresses common symptoms like sagging, broken rack supports or bent rails that interfere with rack movement

• 1 upper rack

• Disconnect power and water to the dishwasher before servicing
• Remove the old rack by sliding it out and detaching any end caps or stops; install the replacement by aligning and sliding onto the existing track/rollers
• Keep all original rollers, end caps and supports; replace damaged hardware as needed
• After installation, run an empty quick wash to ensure proper fit and smooth operation