Gdp280edoww Parts

This tub-mount sleeve is a replacement mounting sleeve that helps secure the washer tub and reduce wear where the tub attaches to the cabinet. Restores proper alignment and helps prevent rubbing or noise from a worn mount area. What it does:

• Provides a durable bearing surface where the tub mounts to the washer cabinet
• Helps keep the tub properly centered to reduce rubbing, vibration, and related noise
• Replaces worn or damaged sleeve surfaces that can cause tub movement or abrasion
• Commonly used when tub mounting points show visible wear or the tub shifts during cycles

• One tub-mount sleeve

• Turn off and unplug the appliance and shut off the water supply before beginning any repair
• Inspect surrounding mounts, seals, and fasteners; replace any additional damaged components as needed
• Use appropriate tools and follow OEM disassembly steps to access and press or slide the sleeve into place

This seal kit is for the main tub. It goes around the pump housing.

The Spray Arm Adapter is an OEM replacement part for GE dishwashers. Located inside the dishwasher tub, this adapter fits securely onto the lower spray arm mount, directing water flow from the spray arm jets. Proper adapter positioning and secure mounting are important for thorough, even cleaning coverage.

Symptoms of a faulty spray arm adapter include:

• Improper or weak water pressure from spray jets
• Dirty dishes clustered in certain areas  
• Leaks around the lower spray arm area
• Loose or wobbly movement of the lower spray arm

Causes may stem from cracked or deteriorated plastic, worn mount fittings, or mineral buildup impeding water flow over time. Replace yours today with this genuine GE adapter to restore optimal spray performance.  

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This inlet base seal is a gasket that fits between the inlet base and its mating surface. Replacing a worn seal helps maintain proper airflow through the inlet path and keeps spills and debris out of internal components.

• Forms a tight, continuous seal at the inlet base-to-housing joint
• Helps preserve correct airflow through the inlet path
• Blocks liquids, grease, and crumbs from leaking into the appliance interior
• Replace if the seal is cracked, flattened, brittle, loose, or you see visible gaps

• Disconnect power to the appliance before servicing
• Remove grates/cartridges, filters, or trim as needed to access the inlet base
• Clean and dry mating surfaces; install the new seal in the same orientation without stretching or twisting
• Reassemble and verify the seal sits evenly with no gaps

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bottle blaster assembly supplies targeted wash water to the dishwasher's Bottle Jets to clean tall, narrow items like baby and sports bottles. Replace a damaged or clogged assembly to restore focused spray and top-rack cleaning performance. What it does:

• Routes wash water to the bottle jet nozzles for concentrated cleaning inside bottles and narrow openings
• Helps improve cleaning on items positioned over the Bottle Jets
• Failure symptoms include no spray from the bottle jets, poor upper-rack cleaning, leaks near the jet area, or visible cracks/damage

• 1 bottle blaster assembly

• Disconnect power and shut off water to the dishwasher before servicing
• Access the bottle jet area; release retaining clips/fasteners and note hose routing and connection points
• Transfer any reusable clips or seals from the original assembly if needed
• Fully seat connections; run a short cycle to check for leaks and proper jet spray

The Console Cover and Graphics Assembly is an OEM replacement part for GE dishwashers. It is responsible for covering and protecting the control panel and touchpad of the dishwasher. Over time, exposure to heat, chemicals, and general wear and tear can cause cracks or discoloration in the console cover. The graphics may fade or peel. 

Causes of a bad console cover include general degradation from usage and cleaning chemicals. 

Symptoms of a bad console cover include:

• Cracks or breaks in the plastic material
• Peeling or fading graphics that are difficult to read 
• Loose fit that allows access to internal components

Replace yours today with this genuine OEM GE part and upgrade your dishwasher’s appearance and ease of use. This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This tub trims kit replaces the plastic trim around the dryer's drum opening to restore a smooth, finished edge and help prevent clothes snags. It refreshes the dryer opening after wear or minor damage. What it does

• Replaces cracked, broken, or missing trim around the dryer drum opening
• Restores a smooth edge to reduce fabric snags and wear on clothing
• Improves the appearance of the appliance front where the drum meets the cabinet
• Helps maintain proper clearance between the drum and cabinet trim

• One tub trims kit

• Disconnect power before starting any repair
• Removal of the dryer door or front panel may be required depending on model
• Use common hand tools; handle trim pieces carefully to avoid scratches
• Inspect surrounding seals and parts during replacement and replace if damaged

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

Bottle with brush. Color: Platinum. Size: 0.6 fl.oz.

Screw for wash impeller.