Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
Ordered parts, waited for them to arrive Took door apart, installed new parts Put door back together shut door (it stayed shut) Washed dishes, opened door (it opened) Dishes were clean (no water on floor) ALL DONE AND IT WORKS Read more
The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.
You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.
Symptoms of a bad upper arm spray assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more
The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.
Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.
Symptoms of a bad Upper Spray Arm Bearing include:
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Door Interlock Switch Assembly is an OEM part for GE dishwashers. It is designed to ensure the dishwasher door is securely closed before the wash cycle begins, preventing leaks and ensuring the appliance operates safely.
Causes of a bad interlock switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch or its housing. A malfunctioning switch can prevent the dishwasher from starting or cause it to stop mid-cycle.
Symptoms of a bad door interlock switch assembly include:
I found out that the door interlock switch was the usual culprit to my dishwasher not working properly and that replacing it will probably fix the problem. I ordered the part from AppliancePartsPros and the part was delivered the next day. I replaced the part in less than 30 minutes and the dishwasher was as good as new. I am impressed with the information provided on your website and that you were able to ship out on the day I ordered it. Your price is great and the part I received was in... Read more
Replaced right sliding arm Read more
The Gasket Spring is an OEM part for GE dishwashers. It plays a crucial role in maintaining a tight seal around the dishwasher door, ensuring that water does not leak during operation. This spring helps keep the door gasket in place, providing a reliable and consistent seal.
Over time, the gasket spring can wear out, lose tension, or become damaged due to repeated use and exposure to the dishwasher’s high temperatures and moisture. A faulty spring can compromise the effectiveness of the door gasket, leading to potential leaks and inefficient washing cycles.
Symptoms of a bad gasket spring include:
Not the first time my 10 year old dishwasher developed a leak. I have learned that the tub gasket gets dirty and the gasket spring gets weak. Cleaning and if needed replacing that solves the problem. In cleaning the tub gasket this time I notice the bottom door seal had separated from the door. It was originally riveted on. This seal is part of the door assembly and not available as a separate part. You need to buy inner door to get a new seal. Not worth it on a 10 year old appliance. BUT,... Read more
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
The GE latch handle is an OEM replacement part responsible for allowing the opening and closing of the dishwasher door. Located on the inner door panel, this part ensures that the dishwasher door latches securely when the machine is in operation, preventing any leaks or disruptions in the cleaning process. Additionally, it provides a convenient means for users to open and close the dishwasher, allowing easy access to load and unload dishes. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. This part fixes the following symptoms
I bought spare part from AppliancePartsPros.com and followed the instructional video. It was easy and saved a few bucks. Read more
This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more
Pulled out the dishwasher and put the new ones on. Very easy to do Read more
Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more
I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more
This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more