Ge Fcm5shbww Freezer - Parts

The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.

Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.

Symptoms of a bad Run Capacitor include:

• The refrigerator compressor fails to start.
• Unusual humming noises coming from the refrigerator.
• The refrigerator cycles on and off more frequently than normal.
• A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

The Start Relay is an OEM part for GE refrigerators. It helps initiate the compressor by providing a temporary boost of power to start the cooling process.

Causes of a bad start relay can include electrical failures, overheating, or general wear and tear.  

Symptoms of a bad start relay include:

• The compressor failing to start
• The refrigerator not cooling properly
• Clicking noises coming from the compressor area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: white. Measures about 9 inches wide by 7-1/2 inches high by 17 inches deep.

This 15 uF capacitor kit supports an AC motor by providing the phase shift needed to start and run smoothly. Replacing a weak or failed capacitor can help resolve hard-start or no-start issues and restore consistent performance. What it does

• Stores and releases energy to help a single-phase AC motor start and maintain proper torque
• Common symptoms include humming or buzzing without starting, repeated clicking, intermittent starting, or warmer-than-normal temperatures
• Visual clues of failure may include a swollen or cracked housing
• Matched 15 uF rating supports correct motor operation per the original design

• One 15 uF capacitor

• Disconnect power before servicing; verify the capacitor is fully discharged before handling
• Note wire positions; move one lead at a time to the new capacitor
• Match the microfarad (uF) rating to the original part for proper performance
• Secure the capacitor using the existing bracket/strap and route wires away from heat and moving parts

The Thermostat is an OEM part for GE freezer. This part regulates the temperature inside the freezer compartment, ensuring that the stored food stays at the desired temperature. The thermostat monitors the internal temperature and signals the cooling system to turn on or off to maintain optimal conditions.

Causes of a bad thermostat can include electrical failures, wear and tear from regular use, or exposure to moisture. 

Symptoms of a bad thermostat include:

• The freezer not cooling properly
• Temperature fluctuations within the compartments
• The cooling system running continuously or not running at all
• Frost buildup or excessive condensation inside the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

This electrical starter engages the designated circuit in your refrigerator so it starts reliably and operates as designed. Replacing a weak or failed starter can restore proper operation and prevent repeated no-start events. What it does:

• Provides initial engagement to start the specific motor/circuit it controls
• Disengages as designed after start-up to protect the circuit
• Failure symptoms may include no start, intermittent starting, repeated clicking or buzzing, and loss of cooling performance
• Helps maintain consistent refrigerator operation when matched to the correct model

• 1 starter

• Disconnect refrigerator power before servicing
• Access the part per your model's service procedure; note wire positions and orientation
• Move connectors one at a time to the new starter; seat fully without forcing terminals
• Inspect nearby wiring/terminals for heat damage and address before reassembly

This exterior drain plug seals the washer's drain opening to prevent leaks and contain water in the tub during operation. It provides a simple replacement to restore a watertight seal at the appliance drain area. What it does:

• Seals the drain opening to help prevent water leaks from the tub or drain housing
• Helps maintain proper drainage by keeping debris out of the drain path
• Can stop visible water weeping or puddling near the base of the washer
• Replaces a cracked, worn or missing exterior drain plug to restore normal operation

• One exterior drain plug

• Disconnect power to the appliance and turn off water supply before starting any work
• Remove the appropriate access panel or lower kick plate to reach the drain opening
• Press or thread the plug into the drain opening as designed; snug by hand and avoid over-tightening
• Inspect the surrounding seal area and replace any damaged gaskets or housings if present; test for leaks after reinstalling panels and restoring power/water

This interior drain plug seals and directs defrost and condensation water into the refrigerator drain channel to help prevent leaks and pooling inside the cabinet. Replacement restores proper drainage and reduces standing water near drawers. What it does:

• Seals the refrigerator drain opening so defrost/condensation water flows into the drain channel
• Helps prevent water from pooling under crispers or on shelf surfaces
• Reduces risk of fouling odors by keeping drain flow unobstructed
• Works with the drain trough and drain tube to route moisture to the evaporator pan

• One interior drain plug

• Disconnect power to the appliance before accessing interior panels
• Remove shelves/drawers and the evaporator or back inner panel as required for access
• Clean the drain channel and remove any debris or ice before installing the new plug
• Inspect surrounding gaskets and seating surface; press the plug firmly into place without forcing

This top cover hinge secures the upper access cover on compatible refrigerators, keeping the cover aligned and stable for reliable operation and easy access during maintenance. It restores proper fit and prevents rattling or loose covers. What it does:

• Supports and fastens the refrigerator's top access cover to the cabinet
• Keeps the cover properly aligned to prevent gaps and vibration noise
• Restores secure cover movement after wear or damage to the original hinge
• Helps maintain a sealed fit so panels sit flush and access remains safe

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver); retain original fasteners unless replacements are supplied
• Align the cover on the hinge before tightening screws; avoid over-torquing hardware

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator door seal creates a tight, flexible gasket that helps keep cold air in and warm air out, improving temperature stability and reducing moisture buildup inside the cabinet. What it does

• Seals the gap between the door and cabinet to maintain proper internal temperature.
• Helps prevent frost and condensation by keeping warm, humid air from entering the compartment.
• Reduces compressor run time and energy loss associated with a leaking door.
• Stops drafts and keeps food fresher by maintaining an airtight barrier.
• Alerts: a torn, stretched, or torn seal can cause warm spots, frost buildup, or longer cooling cycles.

• Unplug the appliance and empty or move food away from the work area before starting.
• Warm the gasket slightly with a hair dryer (low) to make it more flexible for easier installation — avoid overheating.
• Inspect the cabinet lip for damage or debris and clean the sealing surface with mild soap and water before fitting.
• Avoid using sharp tools that may damage the new seal; ensure the gasket is fully seated and aligned around the door.

The Thermostat is an OEM part for GE chest freezers. The key electronic component monitors and regulates subzero holding temperatures inside the freezer. Consistent frozen storage relies on an accurate thermostat reading.  

Causes of failure include wear and tear on microswitch buttons from repeated use over the years, moisture corrosion breaking circuit pathways, or loose wire terminals preventing communication with other control boards.

Symptoms of a faulty thermostat are:

• Fluctuating temperatures that do not match the dial setting
• Frozen items beginning to thaw or defrost  
• Unusual noises or smells coming from inside the cabinet

Replacing with this genuine GE thermostat ensures steady below-zero preservation. Compatible with Hotpoint, RCA, and Kenmore chest freezers, it also supports reliable frozen food protection.
 

This clear interior light cover protects the refrigerator lamp while letting bright light illuminate shelves and food. It keeps the bulb shielded and helps maintain even lighting so you can see contents clearly. What it does:

• Covers and protects the interior lamp from spills and direct contact
• Diffuses light for more even illumination inside the compartment
• Helps prevent damage to the bulb from impacts or debris
• Commonly replaces cracked, cloudy, or missing light lenses

• One replacement light cover

• Disconnect power or unplug appliance before replacing the lens
• Remove old cover carefully and snap or screw new cover into place
• Use only the exact replacement to ensure proper fit and safe clearance from the bulb
• If the bulb or socket is damaged, replace those components as well; avoid handling bulbs with bare hands while hot