Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the dishwasher door opening to contain moisture and steam during wash cycles. Replace if worn, torn, or missing to prevent drips and condensation.
White dishwasher lower rack roller axle. Replaces broken or worn axles that cause wheels to fall off. Snap-in design for easy installation.
We purchased both the roller studs and new rollers for all of the slots on the lower rack. They came two days later and I was able to easily click them into place and the lower rack now rolls smoothly and securely. I only wish I hadn't lived with it in the broken stage as long as I did - such an easy and affordable fix. Read more
Replacement leveling screw threads into your dishwasher's leveling leg to adjust cabinet height. Install when original is stripped, damaged, or missing.
After reading all the systems on this site. It made it pretty easy to diagnose the problem. The part came in and slapped it in within a few minutes. Ran it and made my wife happy. She was under undue stress without her dishwasher and now I am her superman! Will order again from you. Part arrived quickly and the info you provided really saved me a ton of money! Seriously thank you. Read more
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.
The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more
Stainless steel mounting screw for dishwasher components. Replaces rusted, corroded, or missing screws on handles, racks, and internal parts.
I replaced the upper and mid spray arms and bearings, removed filters and screens and cleaned everything. Pulled pump and replaced the connector and the collection sump. Repair took about 3 hours and went very smoothly thanks to the AppliancePros video! I'm on the east coast so I could not believe it when the parts arrived less than 24 hours after I placed the order! Prices were great too . . . I'm a customer for life and my dishwasher cleans the dishes like new now! Read more
Secures hoses to fittings for leak-free operation. Replace when worn or corroded to stop drips on fill, drain, or circulation lines. Confirm fit.
Secures the detergent dispenser to the dishwasher inner door panel. Replace if cracked, broken, or rusted to restore proper alignment and mounting.
New brackets. Read more
Door hinge cup mounts at the lower front corner of the dishwasher tub to cradle the hinge arm. Replace if cracked, worn, or broken to restore alignment.
Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more
Fix leaks around the vent cover with this dishwasher mounting screw. Secures the vent assembly and internal components to prevent water leakage. Quick fix.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
Plastic housing that secures the drain solenoid to the pump assembly. Replace if cracked, broken, or missing to properly position the solenoid mechanism.
Viewed you video on Youtube.com and saw how easy it was to change out the triple water valve. Job completed and working like a charm now. Read more
Seals the sump to maintain water pressure and spray effectiveness. Replace if you notice weak spray, poor cleaning, or leaks. Confirm fit with your model.
Although that this is a 10 yrs old appliance, I decided to repair it as it is part of the entire set in the kitchen. I used the tips on the videos at AppliancePartsPros site and was easy to replace the parts and fix. Only the Inlet sump was leaking, but I decided to replace all parts that are made with similar material to avoid further problems. I was a good decision as the pump suction tube was showing signs of start leaking. I would suggest AppliancePartsPros make that kind of suggestion... Read more
Secures dishwasher hoses to fittings and prevents leaks. Replace if corroded, rusted, or loose to restore a watertight seal. Confirm fit with your model.
Changed the water inlet valve for the water problem. To fix the problem of washer running while door was open, took off the front panel and changed the plunger sw interlock and spring which fixed the problem of washer running while door was opened mid wash cycle. Changed the clamp to the discharge hose as it had rusted.Changed keeper latch assembly as it had cracks on the plastic. Read more
Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.
Ordered new GE part through AppliancePartsPros.com. Looked on Youtube for some assistance in how to replace part. This entailed removed outer door cover and removing old touch pad strip. We were surprised how easy this was to do! Time involved less than 20 minutes! Works perfect now. This is an A+ company to order parts from, and their website is so easy to navigate. I ordered the part and it was at my doorstep in two days, packaged extremely secure to protect the genuine GE part. I... Read more