Ge Pfe29psdass Parts

Cold water tank assembly stores and supplies chilled water to the refrigerator's dispenser and related water channels. Replacing a damaged reservoir helps stop leaks and restore reliable chilled water flow. What it does

• Holds chilled water for the dispenser and downstream water paths
• Routes supply and return lines through built-in inlet/outlet ports
• Common symptoms: leaking reservoir, little or no water from the dispenser, slow or inconsistent flow
• Use as a direct replacement when the existing tank is cracked, warped, or otherwise damaged

• Disconnect power and shut off the water supply before beginning service
• Drain the reservoir and place towels or a pan to catch residual water when removing the old tank
• Access may require removing interior panels or shelving; retain or inspect mounting hardware and seals for reuse

This clip secures the evaporator thermistor to the evaporator tubing so the control can read coil temperature accurately. Replacing a damaged or missing clip helps restore correct cooling and defrost performance by keeping the sensor firmly in place. What it does:

• Holds the evaporator thermistor tightly against the evaporator coil/tubing for accurate temperature sensing
• Supports proper cooling regulation and defrost cycle timing
• A loose or misplaced sensor may show temperature swings, long run times, or frost buildup on the evaporator
• Restores correct sensor placement after repairs or when the original clip is lost or broken

• 1 evaporator thermistor clip

• Unplug the refrigerator; interior metal edges and fins are sharp—wear cut-resistant gloves
• Remove the evaporator cover to access the sensor; note the original sensor location and orientation
• Transfer the thermistor into the new clip and attach it at the same spot so the sensor makes firm contact; do not pinch wires
• Reinstall panels, keep wiring clear of the fan, and restore power

This mounting screw secures appliance components to the chassis for a tight, rattle-free fit. Replacing a missing, stripped, or corroded fastener helps keep panels, brackets, or burner assemblies properly aligned and secure.

• Fastens designated parts to the appliance frame or mounting points
• Helps maintain proper alignment of panels, trim, brackets, or burner assemblies
• Restores hold when the original screw is worn, rusted, or lost
• Symptoms include loose or wobbly components, rattling/vibration, or visible gaps

• Disconnect power; allow all surfaces to cool. For gas units, also shut off the gas supply.
• Use the correct driver/bit; avoid cross-threading.
• If mating threads or clip/nut are damaged, repair or replace them before installing.
• Tighten until secure; do not overtighten to prevent stripping.

Replacement grille thermistor. This temperature sensor monitors air at the grille location and relays the signal to the control so cooling and defrost responses stay consistent and food stays within target temperatures.

• Senses ambient air temperature at the grille and varies resistance with temperature
• Sends data to the control to help regulate compressor/fan run time and defrost intervals
• Aids in maintaining stable refrigerator and freezer temperatures
• A failing sensor may lead to temperature swings, extended run time, or irregular defrosting

• Disconnect power before servicing
• Remove the grille/kickplate to access the sensor and its connector
• Disconnect the old sensor, install the new one, and route wiring as originally; ensure the sensor is fully seated and wires aren't pinched
• Restore power and allow up to 24 hours for temperatures to stabilize

This replacement power cord provides the appliance's main AC connection so it can receive power and operate reliably. It restores a safe, factory-style power connection when the original cord is damaged or worn. What it does

• Supplies mains power to the appliance through the cabinet connection
• Replaces frayed, cut, melted, or damaged cords that cause intermittent power or no power
• Helps eliminate burning smells, arcing, or visible insulation damage at the cord
• Matches OEM electrical connection style for proper fit and secure contact

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the cord
• Verify cord routing and strain relief position to prevent pinch points or abrasion
• Use proper tools and fasteners; tighten connections securely but do not overtighten

Conduction heater for the freezer compartment that melts frost from the evaporator during defrost cycles, helping prevent ice buildup and maintain consistent cooling. Replaces a failed freezer conduction heater to restore defrost function. What it does:

• Heats the evaporator area during defrost cycles to melt accumulated frost and ice.
• Helps prevent excessive ice buildup that can reduce cooling efficiency.
• Common symptoms of a failing heater: visible ice/frost on the evaporator or freezer interior and inconsistent freezer temperatures.
• Designed as a replacement conduction heater for compatible GE freezer evaporator assemblies.

• Disconnect power to the appliance before servicing to avoid electric shock.
• Access typically requires removing the freezer evaporator cover or rear panel.
• Handle the element carefully to avoid damage.

Gallon bin divider for the refrigerator door that keeps gallon jugs and tall containers upright and organized. Durable replacement restores proper separation in the door bin so items stay secure and reduce shifting. What it does:

• Separates the door's gallon bin to keep bottles and tall containers upright and prevent tipping.
• Reduces sliding and shifting when the door opens or closes.
• Replaces cracked, broken, or missing dividers that allow containers to tilt or fall.
• Fits into the existing door bin track to restore original bin organization.

• Remove items from the door bin before installing; some bins may need to be lifted out for access.
• Snap or slide the divider into the bin's existing slot or track—no special tools typically required.
• Inspect the bin and track for cracks or damage; damaged bins may prevent a secure fit.

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

8-18 CA HX 1/2 S

This replacement meat pan assembly provides a removable, easy-to-clean pan for storing deli and meat items and for catching drips to help keep the refrigerator interior sanitary and organized. What it does

• Holds deli/meat items and helps contain juices to reduce mess and cross-contamination.
• Replaces a cracked, warped, missing, or leaking meat pan that no longer seals or sits correctly.
• Restores proper fit on the shelf track so the pan slides in and out smoothly.
• Helps reduce odors and makes cleanup faster by keeping spills contained.

• Remove food and shelves from the area before installing to avoid spills.
• Slide the pan into the existing shelf track until it seats; most installs require no tools.
• Inspect supporting rails or brackets for damage and replace if worn to ensure proper fit.
• Follow basic food-safety cleaning before first use; disconnect power to appliances only if required per your model's service instructions.

This hinge-mounted refrigerator door stop limits how far the door swings open, protecting the cabinet and nearby walls from impact. Replace a cracked or missing stop to restore a controlled, factory door swing and prevent overextension.

• Mounts on the door hinge to control the door's opening range
• Helps prevent the door or handle from striking adjacent walls or cabinets
• Common symptoms: door opens past its normal range, broken/missing stop, visible wear at the hinge stop
• Often needed after an impact or when the original stop cracks from fatigue

• Disconnect power; turn off water to the door if applicable
• Support the door before loosening hinge fasteners; door removal may be required on some models
• Install the stop on the correct hinge location (right or left as required) and tighten hardware securely
• Verify door swing and clearance before fully loading shelves

Replacement fresh food door gasket that seals the refrigerator compartment to keep cold air in and moisture out. Restores proper door sealing to help reduce frost buildup, condensation, and uneven temperatures from a worn seal. What it does:

• Creates an airtight seal around the fresh food door to help maintain consistent internal temperatures.
• Keeps warm, humid air from entering the fresh food compartment, reducing frost and ice buildup.
• Helps prevent water pooling and door-edge condensation caused by a failing seal.
• Can improve cooling performance when the original gasket is cracked, torn, or no longer flexible.

• Unplug the refrigerator or switch off power at the breaker before beginning work to avoid electrical hazards.
• Remove food and shelves as needed for access; clean and dry the door frame surface before installing the new gasket.
• Warm the gasket (room temperature or gentle warm water) to increase flexibility for easier alignment; press firmly into the channel to seat evenly.
• If the gasket requires screws or adhesive, follow the OEM instructions.

This replacement meat pan divider fits inside the deli/meat pan drawer to help separate foods and keep the drawer organized. It restores the original partition function for proper food separation. What it does:

• Replaces a cracked, warped or missing divider to restore separation between deli items
• Keeps meats and cheeses organized and helps reduce contact between different foods
• Helps maintain intended drawer layout so items sit securely and don't shift
• Fits into the factory meat/deli pan track for a stable partition

• Remove food and the deli/meat pan before installing to avoid spills
• Slide the divider into the existing pan grooves until it seats; no special tools required
• Inspect pan tracks for damage before installing; replace any broken components
• Handle carefully to avoid sharp edges and follow refrigerator power-off and food-safety guidance when doing repairs

8-18 hi/lo 5/8

This 8-18 x 9/16 screw is a short sheet-metal fastener used to secure panels, trim and small components on appliances. It replaces missing or stripped screws to restore proper fit and reduce noise from loose parts. What it does

• Secures appliance panels, brackets and trim to prevent movement and rattling
• Holds small components in correct alignment for reliable operation
• Replaces lost, worn or stripped screws that cause gaps or loose fittings
• Common symptom link: fixes rattling panels, loose trim, or parts that shift during use

• One 8-18 x 9/16 screw

• Use the correct 8-18 driver bit and hand or low-torque power driver to avoid stripping
• Do not overtighten; snug until secure to prevent thread damage or panel deformation
• Turn power off/unplug appliance when installing near electrical components
• Keep extra screws on hand—hardware often comes in single quantities

The Manifold & Plug Assembly is an OEM part for GE refrigerators. This assembly is responsible for housing the water filter and ensuring a proper connection to the water supply.

A bad filter manifold & plug assembly can be caused by normal wear and tear, clogging or blockage in the filter, or damage due to mishandling or impact. If you notice a decrease in water flow or water pressure, a strange taste or odor in your drinking water, or if the filter does not fit securely in the assembly, it may indicate a problem with the filter manifold & plug assembly.

Symptoms of a bad filter manifold & plug assembly include:

• Reduced water flow or water pressure
• Strange taste or odor in the drinking water
• Leaks or drips around the filter assembly
• Difficulty in installing or removing the filter

Replace your faulty manifold & plug assembly with this genuine OEM part to ensure clean and filtered water. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.