Gmh6185xvs-1 Parts

A white replacement door handle that restores a usable grip and appearance to your appliance door. Ideal when the original handle is cracked, loose, or missing so the door can be opened and closed reliably. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces cracked, broken, loose or missing handles that make the door difficult to operate.
• Matches original mounting points for a direct-fit replacement.
• Restores the door's finished appearance and basic function.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access the handle mounting screws by opening/removing the door panel per the OEM service instructions.
• Use basic hand tools and retain all original fasteners and trim for reassembly.

This lamp cover is the replacement lens that protects and diffuses your oven's interior light, restoring even illumination while keeping the bulb shielded from heat and food residue. It helps maintain safe, usable oven lighting. What it does:

• Protects the oven light bulb from splashes, crumbs and direct contact.
• Diffuses the bulb for more even interior illumination.
• Replaces a cracked, cloudy, melted or missing lens that can cause dim or exposed lighting.
• Fits over the lamp housing to restore the oven's normal light appearance and function.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the cover carefully—wear gloves to protect from sharp edges or broken glass.
• Remove any retaining screws or clips, swap the old cover for the new one, then secure the retainer.
• After installation, restore power and replace the bulb if issues persist.

This belt-drive is the replacement drive belt that turns the dryer drum so clothes tumble evenly during the cycle. It restores drum rotation when the original belt is worn, stretched, or broken. What it does:

• Wraps around the dryer drum and motor/idler assembly to transfer motor torque to the drum
• Restores normal drum rotation when the belt has failed or slipped
• Helps eliminate symptoms like a non-turning drum, rubbing or squealing noises, or intermittent tumbling
• Compatible with dryers that use a single continuous drum drive belt

• One (1) belt-drive

• Disconnect power (and gas supply for gas models) before servicing
• Access the dryer drum per your model's service instructions—usually from the front or rear—before removing the old belt
• Route the belt around the drum and idler/tensioner exactly as shown in the model's diagram; ensure proper tension and alignment
• If you encounter damaged pulleys, idler, or motor issues, inspect and replace those parts as needed

This piston assembly restores the moving piston used in the appliance's fluid/valve system to help recover proper dispensing and motion. It replaces a worn or damaged piston so the affected function can operate as intended. What it does:

• Replaces the piston that moves inside a valve or dispenser to control fluid or airflow
• Restores proper actuation and sealing that can prevent drips or improper dispensing
• Commonly installed when symptoms include poor dispensing, leaks near the valve area, sticking motion, or unusual noises during operation
• Works as a direct-fit replacement where this OEM piston assembly is specified

• One piston assembly as shown

• Disconnect power (and water supply or gas, if applicable) before starting any repair
• Follow the appliance service manual and use appropriate tools; keep small fasteners and seals organized
• Inspect sealing surfaces and O-rings; replace damaged seals to ensure a leak-free install
• Test the appliance after installation to confirm correct operation

This thermostat is a temperature-limiting control that helps regulate oven/cooking temperature and prevents overheating for safer operation. It replaces a failed limiter to restore proper temperature control and reliable heat cycling. What it does

• Opens or interrupts power when oven temperature exceeds the set limit to prevent overheating
• Restores normal thermostat cycling when the original limiter fails or sticks
• Common symptom: oven runs too hot or will not maintain set temperature
• Common symptom: oven shuts off or will not heat because limiter has opened

• One thermostat (temperature limiter) as shown

• Disconnect power to the appliance before attempting any service
• Access location, removal, and wiring vary by model; refer to your model-specific service instructions
• Handle the sensing element carefully; do not kink or damage the capillary/tube

This thermistor is a refrigerator temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replaces a failed sensor to help restore accurate temperature readings and more consistent cooling. What it does:

• Senses internal refrigerator temperature and sends a variable resistance signal to the control board
• Helps the control system cycle the compressor and fans correctly for stable temperatures
• Commonly replaced when refrigerator runs too cold, too warm, or has irregular cooling cycles
• Can address temperature-error codes or defrost control issues when the sensor is faulty

• Disconnect power to the appliance before inspecting or replacing the sensor
• Handle the sensor and wiring harness carefully to avoid damage to the probe or connectors
• Install in the original sensor mounting location and secure wiring away from moving parts

This base is the appliance's lower cabinet section that supports internal components and helps stabilize the unit. It restores a solid foundation so the appliance sits level and protects internal parts from floor contact and debris. What it does:

• Provides structural support for the appliance's internal assemblies and controls
• Helps stabilize the unit and reduce excessive vibration or rocking
• Protects wiring, motors and other components from contact with the floor
• A damaged or cracked base can cause noisy operation, misalignment, or uneven sitting

• Disconnect power (and gas if applicable) before beginning any repair
• Follow the OEM service manual for disassembly and reassembly steps
• Replacement may require removing the cabinet and/or drum; having a second person helps with lifting and alignment
• Inspect and reuse original fasteners only if undamaged; replace any worn mounting hardware

This air guide directs airflow inside the dryer to improve venting and drying performance. Replacing a damaged guide restores proper air path and helps the dryer run more efficiently and quietly. What it does

• Channels warm air from the blower to the drum and exhaust system to maintain proper airflow.
• Helps prevent air leaks that can cause longer drying times or uneven drying.
• Reduces turbulence that may cause rattling or whistling noises during operation.
• Keeps airflow directed away from internal components to limit lint buildup in sensitive areas.

• Disconnect power (and gas supply for gas dryers) before starting any repair.
• Basic disassembly of the dryer cabinet or front panel may be required; follow the model's service manual.
• Keep track of fasteners and gently handle plastic clips to avoid breakage.