Gsc3507p00ww Parts

Replacement bracket that secures the flood/leak detection switch inside the appliance, keeping the switch positioned to sense unwanted water and help the leak-detection system work as intended. What it does:

• Holds the flood/leak switch in the correct position so it can detect water accumulation.
• Ensures consistent switch activation when water pools under the cabinet or base pan.
• Common repair when you find water under the appliance, persistent leaks, or when leak detection isn't responding.
• Simple, passive mounting part—no electrical function.

• Disconnect power and shut off the water supply before accessing the appliance.
• Remove the appropriate access panels to reach the bracket location; note orientation of the switch before removing.
• Reinstall bracket using the original fasteners or equivalent screws; keep parts organized during disassembly.
• Restore power/water and test the appliance for proper leak-detection operation after reassembly.

This hose clamp secures a washer or dryer hose connection to help prevent leaks and keep hoses firmly attached during operation. It's a simple replacement for worn or loose hose fasteners. What it does:

• Holds inlet or drain hose to the appliance fitting to reduce slipping and leaks
• Restores a tight seal at hose connection points that may be leaking or wobbling
• Keeps hoses positioned correctly during fill and drain cycles
• Useful when clamp is rusted, stretched, or no longer grips reliably

• One hose clamp

• Disconnect power and turn off the water supply before replacing the clamp
• Slide clamp onto hose, position over the fitting, then compress or tighten per clamp type (use pliers or screwdriver as required)
• Inspect the hose and fitting; replace the hose if cracked or damaged
• Test for leaks after restoring power and water

A 10-24 x 1/2 thread-forming screw used to fasten panels and small components in appliances. Replaces missing or damaged fasteners to restore secure mounting and reduce rattling or misalignment. What it does:

• Secures panels, brackets, or trim to prevent movement and vibration
• Replaces missing, stripped, or damaged screws that allow parts to loosen
• Helps maintain proper alignment of doors and access panels
• Small, general-purpose fastener for a variety of appliance interior and exterior attachments

• Disconnect power to the appliance before beginning any repair
• Use the correct driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Compare the old screw to length and thread before installing

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

Size: 8-32 x 5/8 inch.

This E-ring retaining clip secures shafts, axles, and components to prevent lateral movement and keep assemblies aligned. It's a small, spring-steel fastener that restores proper fit and reduces noise from loose parts. What it does

• Holds shafts, rods, and spindles in place to prevent sliding or disengagement
• Restores stable alignment for rotating or sliding assemblies
• Helps stop rattling, clunking, or parts shifting during operation
• Provides a low-profile, durable retention solution for pivot points and axles

• Disconnect power and move appliance to a safe, stable work area before starting
• Use appropriate snap-ring/needle-nose pliers or a small screwdriver to remove and install; E-rings can spring outward
• Inspect mating grooves and shafts for wear; replace clip if deformed or worn
• Wear eye protection and handle carefully—small metal clips can be sharp and may fly off when compressed

Color: White. For gray order WD35X21041. Roller only. Does not include axle. For axle order WD35X21041. Updated by the manufacturer. May be wider than original.

This replacement chamber collection is the oven's inner cavity assembly that forms the cooking chamber and supports heating components. Replacing a damaged chamber restores the oven's proper enclosure for even cooking and safe operation. What it does

• Serves as the oven's inner liner and structural cavity that holds racks and heating elements
• Helps contain heat for consistent cooking temperatures
• Prevents heat and combustion byproducts from reaching external components
• Common symptom indicators: visible dents, cracks, rust or burn-through, smoke or unusual odors from the oven, or uneven cooking

• Disconnect power (and gas if applicable) before beginning work
• May require removal of the oven door, racks, and heating elements to access the cavity
• Handle carefully to avoid sharp edges; wear gloves and eye protection

White. 8-18 x 5/16 inch.

This is a genuine replacement screw used to secure components and panels on compatible GE appliances. It restores proper fit and prevents rattling or loose parts for safe, reliable operation. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Stops rattling or vibration caused by loose fasteners
• Replaces missing, stripped, or damaged screws to restore safe operation
• Helps maintain seals and clearances by holding parts firmly in place

• Screw

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to components
• Keep removed fasteners organized to ensure correct reassembly

This wooden decorative trim panel restores the finished look of the appliance's front area and covers the control or fascia opening for a factory appearance. It replaces a damaged or worn wooden face to refresh the unit's exterior. What it does:

• Provides finished wood trim to cover and protect the control/console opening
• Restores the appliance's appearance after damage, wear, or panel replacement
• Hides mounting points and internal components for a clean look
• Works with existing fasteners and brackets to secure the fascia area

• Disconnect power to the appliance before starting any repair.
• Remove any screws or clips holding the old panel and retain hardware if reusing.
• Align the replacement panel with existing mounting points; do not force parts.

The Lower Dishrack is an OEM part for GE dishwashers. It provides a sturdy shelf for placing pots, pans, plates, and other dishware on the bottom level of the dishwasher interior. The lower dishrack supports dish loads, holding them securely in place during the wash cycles. 

Causes of a failing lower dishrack include long-term wear and tear, corrosion from exposure to water and detergents, damage from improper loading, and loose or broken components.

Symptoms of a bad lower dishrack:

• Difficulty sliding the rack in and out
• The rack getting stuck mid-cycle
• Broken or missing wheels/rollers
• Rust formation
• Bent or misshapen wires

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.