Gts18ibrwrcc Parts

The Hinge Washer is an OEM replacement part for GE refrigerators. It is located on the hinge between the refrigerator door and cabinet. The refrigerator door hinge washer works to evenly distribute weight and reduce stress and friction, enabling smooth and durable door operation.

Causes of a bad hinge washer are generally normal wear and tear. However, damage may also occur from unusually heavy loads being placed on the door, or accidents that impact the door and hinge assembly.

Symptoms of a bad refrigerator door hinge washer include:

• Increased resistance when opening or closing the door
• Excessive noise from the hinge area
• Visible wear marks on the hinge
• Over time and with heavy use, the washer can break down, resulting in improper balance and alignment of the door.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Evaporator Fan Motor is an OEM replacement part for GE side-by-side refrigerator models. Located inside the freezer compartment, it powers the critical fan circulating air across cooling coils.

Causes of a bad motor can include normal wear reducing output over many years, accumulated dirt impairing rotation, or damage sustained during maintenance.

Symptoms include:

• Inability to sufficiently chill freezer items
• Abnormal ice buildup around evaporator housing
• Elevated power consumption from an overworked compressor

This genuine GE replacement is also compatible with Hotpoint models.

The Defrost Thermostat is an OEM part for GE refrigerators. It plays a key role in the defrost system by monitoring the temperature of the evaporator coils and activating the defrost heater when necessary to prevent frost buildup. This part is equipped with one orange lead (4-3/4'') and a yellow lead (15-1/2''), with bare wire ends; but, wire connectors are not included.

Causes of a bad defrost thermostat can include electrical issues, wear and tear over time, or exposure to moisture. A malfunctioning defrost thermostat can result in excessive frost accumulation on the evaporator coils, leading to cooling issues and increased energy consumption.

Symptoms of a bad defrost thermostat include:

• Excessive frost buildup in the freezer
• The refrigerator or freezer not cooling properly
• Increased energy usage
• The defrost heater not activating during the defrost cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This freezer door gasket fits around the door to keep cold air in and moisture out. Replacing a worn or damaged gasket restores proper temperature performance and helps prevent frost and condensation around the freezer opening.

• Creates a tight seal between the freezer door and cabinet
• Helps maintain correct freezer temperature and humidity
• Reduces frost/ice buildup and moisture near the door
• Replaces gaskets that are torn, warped, cracked, shrunken, or not sealing
• Common signs: visible gaps, door not closing fully, frost along the liner, longer run times, or a warming freezer

• Disconnect power; unload items from the freezer door before starting
• Seat the gasket lip evenly into the door channel/retainer all the way around
• Warm the gasket with hot water or a hair dryer on low to help it relax and seal—do not overheat
• Close the door and check for uniform contact; allow time for the gasket to conform

The Snack Pan Slide is an OEM part for GE refrigerators. This part provides a smooth track for the snack pan or deli drawer to slide in and out, ensuring easy access to stored items.

Causes of a bad snack pan slide can include regular wear and tear, damage from overloading the drawer, or breakage due to improper handling.  

Symptoms of a bad snack pan slide include:

• Difficulty opening or closing the snack pan
• The snack pan not sliding smoothly or getting stuck
• Visible cracks or damage to the slide
• The snack pan not staying aligned or securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This left side snack pan slide is a genuine General Electric part, sold individually. This left side snack pan slide can be used as a replacement part for a refrigerator. This is the part on which the crisper drawer rests, and it facilitates the sliding in and out of the crisper drawer. The left side snack pan slide is made out of durable white plastic.The left side snack pan slide might have to be replaced at some point within the lifespan of a refrigerator if it is damaged to the point that it can no longer serve its function. This damage could take the form of cracks, punctures, or erosion to the plastic material as a result of general wear and tear or from a collision with a hard object that warps the component beyond functionality. If either of these things occur, the component should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This left side snack pan slide is compatible with the following appliance brands: General Electric and Kenmore.

The Fresh Food Door Shelf Bar is an OEM part for GE refrigerators. This shelf bar provides a secure space for storing items like bottles, jars, and condiments. It helps maximize the storage capacity and keeps items organized and easily accessible.

Causes of a bad shelf bar can include regular wear and tear, overloading with heavy items, or physical damage from impacts. 

Symptoms of a bad fresh food door shelf bar include:

• Cracks or breaks in the shelf bar
• The shelf bar not fitting securely on the door
• Difficulty in holding items steadily
• The bar becoming loose or detaching from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement door shelf bar restores the front rail on the refrigerator's fresh food door shelf, helping keep bottles and jars contained and organized when the door opens and closes.

• Forms the front rail of a fresh food door shelf to hold items in place
• Replaces a cracked, loose, or missing bar
• Snaps into the existing end slots on the door

• Remove items from the affected door shelf before replacement
• Align the bar with the door's end slots and press until it locks securely
• Always follow appliance safety practices; disconnect power if working near internal components

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

The defrost timer governs the automatic defrost cycle, periodically switching the refrigerator from cooling to defrost. Replacing a failed timer restores reliable defrosting to limit frost buildup and help maintain steady, consistent temperatures. What it does:

• Advances the system through run and defrost periods at set intervals
• Sends power to the defrost heater during defrost, then returns the unit to cooling
• A failed timer may cause heavy frost on the evaporator, poor cooling, or continuous running
• A timer that does not advance or is stuck can leave the refrigerator in defrost or prevent defrost entirely

• 1 defrost timer

• Disconnect power before servicing
• Access location varies by model
• Photograph wire positions; move wires one at a time to the matching terminals on the new timer
• Transfer any mounting bracket, secure the timer, and restore power to verify operation

Restore accurate cooling with this refrigerator temperature control thermostat. The cold control senses compartment temperature and opens or closes the circuit to cycle the cooling system, helping maintain your selected setting when the original control becomes unreliable.

• Monitors refrigerator air temperature via a sensing bulb
• Opens/closes electrical contacts to cycle the cooling system
• Maintains the temperature you select with the control knob
• Common symptoms of a failing control: temperatures too warm or too cold, refrigerator runs constantly or won't start, no response to knob adjustments

• Disconnect power to the refrigerator before servicing
• Access the control housing and note wire locations and the exact routing/placement of the sensing bulb
• Transfer any mounting hardware and the control knob from the old part; install the new thermostat
• Route and secure the sensing bulb exactly as original—do not kink the capillary; restore power, set to a mid setting, and allow temperatures to stabilize before fine-tuning

This freezer shelf assembly restores stable, level storage space in the freezer compartment. Replace a cracked or missing shelf to keep food organized and maintain proper spacing for consistent cold-air circulation.

• Provides a sturdy, level surface to store and organize frozen items
• Helps maintain proper airflow and spacing for efficient cooling
• Replace if the shelf is cracked, bent, broken, or missing
• Common signs include sagging under normal load or not staying seated in side supports

• Unplug the refrigerator before servicing
• Remove items from the area, then lift/slide the old shelf out of the side supports or tracks
• Position the new shelf in the same slots and fully seat both sides
• Verify the shelf is level and secure before loading items

This reversible door plug fills the unused mounting hole when you switch the door swing on your refrigerator. It restores a finished appearance and helps keep air and moisture from entering through the opening.

• Covers the unused door hole created during a door swing reversal
• Helps maintain proper sealing and resists drafts/condensation at the opening
• Restores a clean, finished, factory look to the door
• Common symptoms: missing or cracked plug, exposed hole, cosmetic gap on door edge

• Disconnect power before servicing any door components
• Gently pry out the old plug with a plastic trim tool to avoid scratches
• Align the new plug with the opening and press until fully seated and flush
• Verify the door closes properly and the gasket seals evenly

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

This compressor overload protects the refrigerator's compressor by cutting power if it overheats or draws excessive current. When it fails, the compressor may not start and the fridge can warm up while you hear repeated clicking from the rear.

• Opens the circuit to the compressor when temperature or amperage exceed design limits
• Helps prevent compressor motor damage from locked-rotor or overheating conditions
• Typical failure symptoms: compressor won't start, warm refrigerator/freezer, rhythmic clicking or buzzing near the compressor
• Physical clues: heat discoloration, cracked housing, or a loose internal rattle

• Unplug the refrigerator and allow the compressor area to cool before servicing
• Remove the rear access panel and the compressor start device cover
• Note wire locations; pull the old overload straight off the compressor terminal and transfer any wires; reinstall with the existing start relay as designed
• Seat fully on the terminal and reinstall the cover; replace any heat-damaged terminals or companion components if needed