Gtw330ask2ww G3 Parts

The Hub nut is an OEM part for GE washing machines, designed to securely fasten the tub assembly to the drive system of the washer. This component is crucial for the stability and operation of the washing machine's drum, ensuring that it remains properly aligned and attached during the vigorous motion of the wash cycles.

Per the manufacturer due to the high torgue on the hub nut an impact wrench should be used to remove and replace the hub nut. It also rquires a 90 ft lb torque limiting extension WX05X10028 and a 1 5/16th impact socket WX05X10022. You can order these through the links or use ones you already have. WARNING: The 90 ft lb torque limiting extension must be used when removing or installing the hub nut to prevent damage to the hub nut and transmission due to over torquing with the impact wrench. 

Causes of these issues can range from natural wear and tear over time to improper installation or overloading of the washer, which can exert undue stress on the Nut Hub and other related components. Ensuring that the Nut Hub is in good condition and properly tightened is essential for the longevity and proper function of your GE washing machine.

Symptoms of a faulty Hub nut include:

• Unusual noises during the spin cycle, indicating that the drum may be loose or off-balance
• The washing machine's drum exhibiting excessive movement or vibration beyond normal levels
• Water leaks from the area surrounding the drum

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 1/3 HP Motor Pulley & Nut is an OEM part for GE washing machines. This component is crucial for the proper operation of the washing machine, as it helps to transfer power from the motor to the washing drum, enabling the drum to spin and agitate during the wash cycle.

Over time, the motor pulley and nut can wear out due to constant use and the high-torque environment in which they operate. Additionally, they can become damaged from overloading the washing machine, causing the pulley to warp or the nut to loosen.

Symptoms of a bad motor pulley and nut include:

• The drum not spinning or agitating
• Unusual noises such as grinding or squeaking during operation
• The washing machine not completing cycles properly
• The pulley appearing visibly worn or damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fabric Softener Dispenser is an OEM part for GE washing machines. This dispenser ensures the accurate distribution of fabric softener into the wash cycle, allowing for even softening of your laundry. It releases fabric softener at the appropriate time, enhancing the washing process and leaving clothes feeling soft and fresh.

Causes of a bad dispenser can include clogs or blockages from fabric softener residue, wear and tear from frequent use, or mechanical failure within the dispenser components.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the wash cycle
• Residue or buildup in the dispenser compartment
• Leaks or drips from the dispenser area
• Clothes not feeling as soft as usual after washing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Lock Wiring Harness is an OEM part for GE washing machines. It connects the lid lock mechanism to the washing machine’s control board, ensuring proper communication and functionality. This wiring harness is crucial for the safe operation of the washer, as it ensures the lid remains locked during certain cycles to prevent accidental openings and maintain safety.

You should replace the lid lock wiring harness if it becomes faulty. Causes of a bad wiring harness can include regular wear and tear, electrical faults, or damage from impacts or pinching. A damaged wiring harness can lead to communication errors between the lid lock and control board, resulting in improper functioning of the lid lock mechanism.

Symptoms of a bad lid lock wiring harness include:

• The washing machine not starting or stopping mid-cycle
• The lid not locking or unlocking properly
• Error codes related to the lid lock mechanism
• The washer not responding to control inputs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Lock Bezel is an OEM replacement part for GE washing machines. It is a component that surrounds and secures the lid or door lock mechanism of the washer.

Symptoms of a bad lid lock bezel include:

• Difficulty in opening or closing the washer lid
• Washer lid not locking properly or feeling loose
• Cracks or damage to the bezel, affecting its ability to secure the lock mechanism
• Water leaks or moisture around the lid area

Causes of a bad washer lid lock bezel can include physical impact or mishandling, wear and tear over extended use, or issues with the locking mechanism itself.  

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore washer models.

The Hub Nut Washer is an OEM part for GE washing machines. It functions to secure the hub and ensure that the drum remains properly aligned during wash and spin cycles, contributing to the smooth operation of the washing machine.

Causes of a bad hub nut washer can include wear and tear over time, excessive vibration or movement, or exposure to harsh detergents. A damaged or worn-out hub nut washer can lead to issues with the drum's stability, affecting the overall performance of the washing machine.

Symptoms of a bad Hub Nut Washer include:

• Excessive noise or vibration during wash cycles
• The drum not spinning correctly or being misaligned
• Leaks around the drum area
• Loose or wobbly drum

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Seal is an OEM part for GE washing machines. This seal ensures a watertight connection between the drain pump and the washer tub, preventing leaks during the draining process. It plays a critical role in maintaining the efficiency and cleanliness of the wash cycle by keeping water contained within the system.

Causes of a bad drain pump seal can include wear and tear from regular use, degradation due to exposure to harsh detergents or chemicals, or physical damage such as cracks or tears. A compromised seal can lead to water leakage and potentially damage other components of the washing machine.

Symptoms of a bad drain pump seal include:

• Water leaking from the bottom of the washer
• Unusual noises during the draining cycle
• The washer not draining properly
• Visible cracks or damage to the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

This button tree is the group of selector buttons behind the control panel. It restores reliable button action so you can choose cycles and options when keys stick, feel mushy, or stop responding.

• Provides the push-button interface for cycle and option selections on the control panel
• Helps address unresponsive or intermittent keys
• Resolves sticking or jammed buttons
• Restores proper alignment and tactile feel

• Disconnect power to the appliance before servicing
• Remove the console/control panel to access the button tree
• Seat the new button tree so each button aligns with the control board switch positions and the overlay
• Handle the user interface board and wiring gently; do not force clips or tabs

The Selector Switch is an OEM part for GE washing machines. It directs power to specific components based on the selected wash cycle to properly operate the cycles chosen on the control panel. 

Causes of a bad selector switch failure include broken or stuck contacts preventing current from flowing as needed to different parts of the washer.

Symptoms of a bad selector switch include:

• Inability to advance fully through available cycles  
• Random or unexpected operation of unrelated components
• Strange odors, sparks, or smoke from the internal switch area
• Reduced functionality as cycles lack full components running

This OEM GE replacement selector switch is also compatible with some Hotpoint, RCA, and Kenmore models.

The 1/3 Hp Motor and Nut is an OEM part for GE washing machines. This motor is responsible for driving the drum and agitator, providing the necessary motion for washing your clothes effectively. It delivers the power needed to rotate the drum and agitator, creating the necessary agitation and movement to clean your clothes thoroughly.

A bad drive motor can occur due to wear and tear over time or electrical malfunctions. If you experience symptoms such as the drum not spinning, unusual noises during operation, or a complete lack of movement, it may be time to replace the drive motor.

Symptoms of a bad drive motor include:

• Drum not spinning
• Unusual noises during operation
• Lack of movement

Restore performance of your GE washing machine by replacing the faulty 1/3 HP drive motor & nut with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

Size: 10-32 GXTT FLP.595 S

Original OEM Phillips wafer head screw 8 - 18 X 3/8 inch

This lid lock harness clip secures the lid lock wire harness to the washer cabinet or top. It keeps the wiring routed and protected to help prevent chafing, snagging, and intermittent lid-lock performance issues. What it does / common symptoms:

• Holds the lid lock wire harness in place along the cabinet/top
• Maintains proper routing to avoid pinching or rubbing on moving parts
• Reduces vibration-related wear on the wiring
• Symptoms of a failed/missing clip: loose or dangling harness, scuffed insulation, intermittent lid-lock response

• 1 lid lock wire harness clip

• Disconnect power before servicing
• Access the lid lock wiring path (lift top/remove console as required by your model)
• Release the old clip from the panel and harness; snap the new clip into the mounting hole and secure the harness
• Ensure the harness has adequate slack and is not pinched before restoring power