Gtw460asj5wwn Parts

This silicon controlled rectifier (SCR) switches and regulates power in compatible appliance control circuits, helping the unit deliver correct power to heating elements or motors. It's a direct replacement component when the original SCR fails. What it does

• Acts as a solid-state switch that controls current flow to heating elements, motors or other high-current circuits.
• Fails open or shorted when worn; common symptom is loss of heating, intermittent power to the controlled component, or no operation on affected circuits.
• Provides fast, repeatable switching compared with electromechanical relays.
• Designed for stud-mount installation with insulated/marked terminals for correct wiring.

• One silicon controlled rectifier (SCR) as listed.

• Disconnect all power before accessing or replacing the SCR to avoid shock or equipment damage.
• Note terminal orientation and wiring before removal; replace with the same terminal/stud configuration.
• Avoid electrostatic discharge to the replacement part; handle by the body and avoid touching terminals.

This backsplash assembly kit replaces the rear wall panel on a range or cooktop to restore a finished appearance and protect the wall behind the appliance from heat and splatter. It's a direct-fit exterior part used when the original panel is dented, rusted, cracked, or missing. What it does

• Covers and protects the area behind the cooktop from grease, heat, and food splatter
• Restores the appliance's finished appearance and concealment of rear openings
• Replaces bent, corroded, or cosmetically damaged backsplash panels
• Helps secure rear-mounted controls and wiring by providing the proper mounting surface

• One backsplash assembly

• Disconnect power (and gas, if applicable) before starting any repair
• Remove range from the wall or pull unit forward as needed to access mounting fasteners
• Use proper fasteners and alignment; some models require trim pieces or spacers for correct fit
• Wear gloves and eye protection—edges may be sharp; for detailed instructions

This GE Ball Joint Upper is an OEM part for GE washing machines. Designed to ensure smooth and stable movement of the washing drum, this ball joint plays a crucial role in the appliance's suspension system. 

A compromised ball joint can lead to a decline in the performance of the washing machine, making it essential to address the issue promptly.

Symptoms of a bad Ball Joint Upper include:

• Unusual noises during operation, especially during the spin cycle.
• The drum may seem to wobble or be off-balance.
• Excessive vibration of the machine, more than usual.
• Uneven wear of other suspension parts, leading to further maintenance issues.
• Potential leakage or damage to surrounding components due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Large Lid is an OEM replacement part for GE washers. It is designed to fit and cover the opening of the washer drum interior. This large lid ensures a secure closure during the washing cycle, preventing accidents, water from splashing out and keeping your laundry contained.

A bad large lid can be caused by normal wear and tear over time or accidental damage. If you notice cracks, discoloration, or any other damage to the lid, it is recommended to replace it.

Symptoms of a faulty large lid include:

• Water leaking or splashing out of the washer drum
• Difficulty in closing or sealing the lid properly
• A loose or wobbly lid

Restore your GE washer by replacing the old or damaged large lid with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Start Capacitor is an OEM part for GE washing machines. It is comprised of a bracket and capacitor, which work together in the motor control circuit to start and run the drive motor. The capacitor provides a phase shift that allows for smoother operation of the electric motor.

Symptoms of a bad Start Capacitor include:

• The washer fails to agitate or spin clothes
• An electric burning smell coming from the motor or control board  
• The drive motor makes buzzing or humming noises during the operation

Causes of failure can be normal component degradation over time. Exposure to moisture, physical damage, or operating the machine with an unbalanced load can also stress the capacitor prematurely. 

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Leveling leg is an OEM component specifically designed for GE washing machines. This accessory provides stability for the entire unit during operation. 

Symptoms of a bad Leveling leg can include:

• Excessive tipping or leaning of the washer during operation   
• Walks or moves across a tile floor while operating  
• Deterioration like rust developing or cracks appearing

Causes involve long-term exposure to vibration and cycles of weight variations inside the washer. Over time, wearing down can potentially compromise support.

This GE replacement part is also compatible with Hotpoint, RCA and select Kenmore models. 

The Spring is an OEM part for GE front-loading washing machines. It is responsible for assisting with the opening and closing of the washer door during the loading and unloading of clothes.

Causes of a bad spring can include cracks or fractures from repeated flexing over thousands of cycles. Stress and damage from excessively heavy loads or forced/slammed door movements can hasten spring failure.

Symptoms of a failed spring include:

• The door being hard to open/close or moving too freely
• An inability to hold the door securely closed
• Unnecessary noise and vibration from the door

Replace the worn spring with this genuine GE OEM part to restore proper function and balance to the door. It is designed for precise performance and durability. This replacement is also compatible with some Kenmore machines using GE components.

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This washer control knob assembly replaces the main cycle selector knob. Swap a cracked or loose knob to restore precise, reliable selection of wash cycles and settings.

• Attaches to the selector shaft to set wash cycles and options
• Fixes issues such as a cracked hub, stripped insert, or knob that falls off
• Symptoms include free-spinning or loose knob, difficulty turning, or inability to select a cycle
• Restores positive engagement and control feel

• Disconnect power to the washer before servicing
• Pull the old knob straight off; gently wiggle if needed to release
• Align the flat/D-shaped side of the new knob with the shaft and press firmly until fully seated
• If the knob won't seat or stay on, inspect the selector/timer shaft for damage

The Bleach Cup is an OEM component specifically designed for GE top-load washing machines. It provides centralized bleach dispensing during wash cycles. 

Located at the lower rear of the tub interior, this small plastic cup features a perimeter vent design. It holds liquid bleach to permeate laundry as needed, then rinses away fully before spinning. Proper cup placement prevents unwanted coloring or bleaching of inner tub surfaces. 

Causes of issues include stretching/cracking from chemicals over time or accidental impacts disrupting vent placement.

Symptoms of a bad bleach cup:

• Bleach stains or residue accumulating inside the tub  
• Bleach not fully washing away after dispensing
• Cup detaching during agitation cycles

Replacing with this authentic GE OEM part restores optimized dispensing. It helps fabrics receive full bleaching benefits without damage to washer components. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.

This is a self-tapping Plastite screw with a hex washer head and a 5/8 in. length that secures plastic and thin-sheet components. Use it to replace missing or damaged mounting screws for a snug, reliable fit. What it does:

• Forms threads in plastic (Plastite style) to fasten panels, brackets, and trims.
• Hex washer head provides a larger bearing surface for better holding power.
• Replaces stripped, corroded, or missing screws to stop loose or rattling parts.
• Works where a self-tapping screw is required for secure mounting without a separate nut.

• Use the correct hex/nut driver and a properly fitting bit to avoid stripping the head.
• Hand-start the screw and drive straight to prevent cross-threading; stop when snug—do not overtighten into plastic.
• Unplug the appliance or shut off power before disassembling or working near electrical components.
• Replace with the same screw type and size to maintain proper fit and function.

LID BUSHING LEFT

LID BUSHING RIGHT

This molded wire tie standoff provides a secure anchor point for a cable tie to hold wiring and harnesses away from moving parts and hot or sharp surfaces, helping reduce wear and electrical risk. Fits common HVAC and appliance wiring panels. What it does:

• Anchors wire ties to the appliance cabinet or chassis so harnesses stay routed and secured
• Prevents wires from rubbing on sharp edges, hot components or moving parts
• Helps stop intermittent electrical issues from loose or vibrating connections
• Reduces noise from loose wiring that can vibrate during operation

• One wire tie standoff

• Disconnect power before servicing the appliance to avoid shock or damage
• Mount in the original standoff hole or approved panel location; secure a cable tie through the top loop to hold the harness
• Use the correct fastener or snap method for your model—do not force or overtighten
• If routing or attaching multiple wires, verify clearance from heating elements and moving parts

This belt protector is a replacement cover that shields the dryer drive belt and nearby components from damage, helping maintain smooth drum rotation and prevent premature belt wear. What it does:

• Covers and protects the dryer drive belt from contact with the cabinet and foreign objects
• Helps prevent belt fraying and rubbing that can cause noise or reduced performance
• Keeps lint and debris away from the belt path to reduce overheating risk
• Supports proper belt routing for consistent drum movement

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the dryer top or rear panel—use basic hand tools
• Inspect the drive belt and idler for wear while the protector is off; replace if damaged