Gtw46oasj6ww Parts

This backsplash assembly kit replaces the rear wall panel on a range or cooktop to restore a finished appearance and protect the wall behind the appliance from heat and splatter. It's a direct-fit exterior part used when the original panel is dented, rusted, cracked, or missing. What it does

• Covers and protects the area behind the cooktop from grease, heat, and food splatter
• Restores the appliance's finished appearance and concealment of rear openings
• Replaces bent, corroded, or cosmetically damaged backsplash panels
• Helps secure rear-mounted controls and wiring by providing the proper mounting surface

• One backsplash assembly

• Disconnect power (and gas, if applicable) before starting any repair
• Remove range from the wall or pull unit forward as needed to access mounting fasteners
• Use proper fasteners and alignment; some models require trim pieces or spacers for correct fit
• Wear gloves and eye protection—edges may be sharp; for detailed instructions

This GE Ball Joint Upper is an OEM part for GE washing machines. Designed to ensure smooth and stable movement of the washing drum, this ball joint plays a crucial role in the appliance's suspension system. 

A compromised ball joint can lead to a decline in the performance of the washing machine, making it essential to address the issue promptly.

Symptoms of a bad Ball Joint Upper include:

• Unusual noises during operation, especially during the spin cycle.
• The drum may seem to wobble or be off-balance.
• Excessive vibration of the machine, more than usual.
• Uneven wear of other suspension parts, leading to further maintenance issues.
• Potential leakage or damage to surrounding components due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Large Lid is an OEM replacement part for GE washers. It is designed to fit and cover the opening of the washer drum interior. This large lid ensures a secure closure during the washing cycle, preventing accidents, water from splashing out and keeping your laundry contained.

A bad large lid can be caused by normal wear and tear over time or accidental damage. If you notice cracks, discoloration, or any other damage to the lid, it is recommended to replace it.

Symptoms of a faulty large lid include:

• Water leaking or splashing out of the washer drum
• Difficulty in closing or sealing the lid properly
• A loose or wobbly lid

Restore your GE washer by replacing the old or damaged large lid with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Start Capacitor is an OEM part for GE washing machines. It is comprised of a bracket and capacitor, which work together in the motor control circuit to start and run the drive motor. The capacitor provides a phase shift that allows for smoother operation of the electric motor.

Symptoms of a bad Start Capacitor include:

• The washer fails to agitate or spin clothes
• An electric burning smell coming from the motor or control board  
• The drive motor makes buzzing or humming noises during the operation

Causes of failure can be normal component degradation over time. Exposure to moisture, physical damage, or operating the machine with an unbalanced load can also stress the capacitor prematurely. 

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

The External Drain Hose is an OEM part for GE washers. It is responsible for directing excess water from the washer out of the home during the drain cycle. The external drain hose connects from the bottom of the washer to an external drain point, such as a standpipe, drain pump, or utility sink. 

Causes of a bad external drain hose can include cracks, leaks, or holes developing over prolonged use. Mineral buildup or contaminants inside the hose can also cause blockages.

Symptoms of a bad external drain hose include: 

• Water failing to drain or draining slowly during the cycle 
• Puddles or flooding occurring near or beneath the washer
• Strange draining noises or sounds emanating from the hose

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Leveling leg is an OEM component specifically designed for GE washing machines. This accessory provides stability for the entire unit during operation. 

Symptoms of a bad Leveling leg can include:

• Excessive tipping or leaning of the washer during operation   
• Walks or moves across a tile floor while operating  
• Deterioration like rust developing or cracks appearing

Causes involve long-term exposure to vibration and cycles of weight variations inside the washer. Over time, wearing down can potentially compromise support.

This GE replacement part is also compatible with Hotpoint, RCA and select Kenmore models. 

The Spring is an OEM part for GE front-loading washing machines. It is responsible for assisting with the opening and closing of the washer door during the loading and unloading of clothes.

Causes of a bad spring can include cracks or fractures from repeated flexing over thousands of cycles. Stress and damage from excessively heavy loads or forced/slammed door movements can hasten spring failure.

Symptoms of a failed spring include:

• The door being hard to open/close or moving too freely
• An inability to hold the door securely closed
• Unnecessary noise and vibration from the door

Replace the worn spring with this genuine GE OEM part to restore proper function and balance to the door. It is designed for precise performance and durability. This replacement is also compatible with some Kenmore machines using GE components.

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Pressure Hose Assembly is an OEM component specially designed for GE top-load washing machines. It provides pressurized water transport from the water inlet valve to the machine components that require it. 

Located internally behind the washer casing, this tough braided hose reliably conveys water from the home supply plumbing. Its reinforced construction prevents kinks that could obstruct flow to critical parts like the dispenser drawer and pump chamber. 

Causes related to hose failure center around splits or cracks developing due to stress from repeated machine-generated pressure pulses over 10+ years.

Symptoms of a bad pressure hose include: 

• Reduced or inconsistent water levels during cycles   
• Water leaking/dripping inside unit from hosed areas
• Noticeable splits or cracks visible in braided casing

Replacing with this authentic GE OEM hose restores optimized water transmission. Proper flow supports thorough cleaning for washer units like Hotpoint, RCA, or Kenmore top-loaders.

This washer control knob assembly replaces the main cycle selector knob. Swap a cracked or loose knob to restore precise, reliable selection of wash cycles and settings.

• Attaches to the selector shaft to set wash cycles and options
• Fixes issues such as a cracked hub, stripped insert, or knob that falls off
• Symptoms include free-spinning or loose knob, difficulty turning, or inability to select a cycle
• Restores positive engagement and control feel

• Disconnect power to the washer before servicing
• Pull the old knob straight off; gently wiggle if needed to release
• Align the flat/D-shaped side of the new knob with the shaft and press firmly until fully seated
• If the knob won't seat or stay on, inspect the selector/timer shaft for damage

The Bleach Cup is an OEM component specifically designed for GE top-load washing machines. It provides centralized bleach dispensing during wash cycles. 

Located at the lower rear of the tub interior, this small plastic cup features a perimeter vent design. It holds liquid bleach to permeate laundry as needed, then rinses away fully before spinning. Proper cup placement prevents unwanted coloring or bleaching of inner tub surfaces. 

Causes of issues include stretching/cracking from chemicals over time or accidental impacts disrupting vent placement.

Symptoms of a bad bleach cup:

• Bleach stains or residue accumulating inside the tub  
• Bleach not fully washing away after dispensing
• Cup detaching during agitation cycles

Replacing with this authentic GE OEM part restores optimized dispensing. It helps fabrics receive full bleaching benefits without damage to washer components. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.

This is a self-tapping Plastite screw with a hex washer head and a 5/8 in. length that secures plastic and thin-sheet components. Use it to replace missing or damaged mounting screws for a snug, reliable fit. What it does:

• Forms threads in plastic (Plastite style) to fasten panels, brackets, and trims.
• Hex washer head provides a larger bearing surface for better holding power.
• Replaces stripped, corroded, or missing screws to stop loose or rattling parts.
• Works where a self-tapping screw is required for secure mounting without a separate nut.

• Use the correct hex/nut driver and a properly fitting bit to avoid stripping the head.
• Hand-start the screw and drive straight to prevent cross-threading; stop when snug—do not overtighten into plastic.
• Unplug the appliance or shut off power before disassembling or working near electrical components.
• Replace with the same screw type and size to maintain proper fit and function.

LID BUSHING LEFT

LID BUSHING RIGHT

This molded wire tie standoff provides a secure anchor point for a cable tie to hold wiring and harnesses away from moving parts and hot or sharp surfaces, helping reduce wear and electrical risk. Fits common HVAC and appliance wiring panels. What it does:

• Anchors wire ties to the appliance cabinet or chassis so harnesses stay routed and secured
• Prevents wires from rubbing on sharp edges, hot components or moving parts
• Helps stop intermittent electrical issues from loose or vibrating connections
• Reduces noise from loose wiring that can vibrate during operation

• One wire tie standoff

• Disconnect power before servicing the appliance to avoid shock or damage
• Mount in the original standoff hole or approved panel location; secure a cable tie through the top loop to hold the harness
• Use the correct fastener or snap method for your model—do not force or overtighten
• If routing or attaching multiple wires, verify clearance from heating elements and moving parts