Gtw680bsjows Parts

The Washer Hub is an OEM replacement part for GE washing machines. It is a central component located inside the washing machine basket that the inner tub, drive motor, and suspension springs connect to. The washer hub rotates the washing basket during agitation and spinning cycles to clean clothes thoroughly.

Constant rotational motion and vibration placed on the hub can potentially cause cracks or weakness over an extended time. Improper load balancing causing excessive shaking may also damage the hub.

Symptoms of a bad washer hub include: 

• The washing machine basket fails to spin or agitate properly
• Loud grinding or clicking noises coming from inside the machine  
• Vibrations felt through the cabinets or floor during cycles
• Misalignment or wobbling of the inner washing tub

This OEM GE replacement part is compatible with some Hotpoint, RCA, and Kenmore.

The Motor Pulley & Nut is an OEM part for GE washing machines.

Causes of a bad pulley and nut can include wear from repeated use over time damaging threads, cracks forming in plastic pulleys, or loose, stripped, or lost mounting fasteners compromising power transfer.

Symptoms of a bad pulley and nut assembly include:

• Reduced or inefficient agitation and spin speeds
• Abnormal vibration or noise from the drive motor
• Complete inability to agitate or spin clothes
• Warm motor that indicates slippage problems
• Visible damage or cracking of plastic pulley components

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Hub Nut Washer is an OEM part for GE washing machines. It functions to secure the hub and ensure that the drum remains properly aligned during wash and spin cycles, contributing to the smooth operation of the washing machine.

Causes of a bad hub nut washer can include wear and tear over time, excessive vibration or movement, or exposure to harsh detergents. A damaged or worn-out hub nut washer can lead to issues with the drum's stability, affecting the overall performance of the washing machine.

Symptoms of a bad Hub Nut Washer include:

• Excessive noise or vibration during wash cycles
• The drum not spinning correctly or being misaligned
• Leaks around the drum area
• Loose or wobbly drum

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Glass Frame Assembly is an OEM part for GE washing machines. It serves as both a protective barrier and a see-through lid on the washing machine. The glass frame allows users to monitor wash loads without having to open the door and risk water spillage. 

Symptoms of a bad glass frame assembly include:

• Cracks or chips in the glass that compromise strength and viewing ability
• Warping, bending, or other distortions of the frame itself
• Binding, sticking, or troublesome opening/closing of the lid 

Causes of failure are typically impacts or accidental mishandling that result in damage over time. Glass can crack or frames become misshapen from repeated use and closing of the heavy lid.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Seal is an OEM part for GE washing machines. This seal ensures a watertight connection between the drain pump and the washer tub, preventing leaks during the draining process. It plays a critical role in maintaining the efficiency and cleanliness of the wash cycle by keeping water contained within the system.

Causes of a bad drain pump seal can include wear and tear from regular use, degradation due to exposure to harsh detergents or chemicals, or physical damage such as cracks or tears. A compromised seal can lead to water leakage and potentially damage other components of the washing machine.

Symptoms of a bad drain pump seal include:

• Water leaking from the bottom of the washer
• Unusual noises during the draining cycle
• The washer not draining properly
• Visible cracks or damage to the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Valve Seal is an OEM part for GE washing machines, designed to ensure a watertight seal around the water inlet valve. This part helps prevent leaks by sealing the connection between the water inlet valve and the washing machine's internal tubing. 

Causes of a bad water inlet valve seal include normal wear and tear, exposure to hard water minerals that can erode the seal, and improper installation that may strain or damage the seal.

Symptoms of a bad Water Inlet Valve Seal include:

• Water leaking from the back or underside of the washing machine
• Visible signs of wear or damage to the seal
• Unexplained increase in water usage or utility bills, which may indicate a slow leak

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Recirculation Pump is an OEM part for GE washers. It sits within the washer base and circulates water during wash and spin cycles. The recirculation pump draws water from the tub, sending it through hoses to critical components like the dispenser and water inlet valve. 

Symptoms of a bad recirculation pump include:

• Failure to drain or fill the washer tub properly  
• Abnormal noises emitting from the pump motor area
• Visible leaks at the pump seal or connections

Causes can be worn seals, electrical failure of the pump motor, or obstructions interfering with water flow over many cycles. 

Compatible models include Hotpoint, RCA, and select Kenmore. Proper water management enables powerful cleaning for all your laundry needs.
 

The Thermistor is an OEM part for GE washers. This thermistor monitors and regulates the temperature inside your GE washer during the different cycles.

The thermistor ensures accurate temperature sensing by measuring the temperature of the water or air inside the washer and sends this information to the control board, allowing it to adjust the heating elements or cooling mechanisms accordingly.

A bad thermistor can occur due to wear and tear, exposure to extreme temperatures, or electrical malfunctions. If you notice symptoms such as the washer not heating or cooling properly, error codes indicating a faulty thermistor, or inconsistent temperature readings, it may be time to replace the component.

Symptoms of a bad thermistor include:

• Washer not heating or cooling properly
• Error codes indicating a faulty thermistor
• Inconsistent temperature readings

Restore accurate temperature control by replacing the faulty thermistor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This washer drain hose carries used water from the drain pump to your home standpipe or laundry sink. Replacing a cracked, kinked, or leaking hose restores proper draining and helps prevent puddles and water damage.

• Directs wastewater from the washer during drain and spin cycles
• Replaces a hose that is split, brittle, kinked, or clogged
• Symptoms can include slow or no draining, water leaks during drain, or water left in the tub
• Visible wear or punctures on the hose indicate replacement is needed

• Unplug the washer and turn off water; pull the unit forward for access
• Expect residual water—use towels or a shallow pan
• Move the hose at the drain pump outlet and route to the standpipe or sink; secure with existing clamp/retainer
• Ensure a smooth, unkinked run with a proper high loop; test a drain cycle and check for leaks

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

The Lid Lock Striker is an OEM replacement part for GE washing machines. It is part of the lid lock system that allows the washer lid to securely lock during the wash and spin cycles.

Symptoms of a faulty lid lock striker include:

• Lid not securely locking during operation
• Error messages related to the lid lock system
• Inability to start the washer due to lid lock issues

A bad lid lock striker can be caused by normal wear and tear over time or damage due to accidental mishandling. If you notice that the lid is not securely locking or if the washer fails to start due to a lid lock error, it may be time to replace the old or damaged lid lock striker with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The 1/2 HP Motor and Nut is an OEM washing machine component specifically designed for GE top-load washers. It provides the primary power source for agitation and spinning motions. 

Centrally located inside the washer base, the sturdy universal motor efficiently rotates the drive shaft through a coupling and rear axle assembly. A large hexagonal nut secures this drive hub connection with the tub.

Symptoms of a bad motor include:  

• Failure to start or complete agitation/spin cycles
• Abnormal noises such as grinding or knocking sounds  
• Motor overheating or burnt smells detected

Causes relate to normal motor coil degradation from continuous load cycling. Replacing with this authentic GE OEM part restores optimized power and torque transmission for thorough cleaning. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.
 

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

The Detergent Dispenser Assembly is an OEM part for GE washers. It acts as the gateway through which detergent is added and released during cycles. This assembly contains the dispenser drawer. 

Causes of a bad dispenser assembly include mineral or soap buildup blocking valves, cracks in the drawer allowing leaks, or damaged inlet and outlet components.

Symptoms of a bad dispenser assembly are:

• Improper or incomplete dispensing of detergent 
• Residual detergent left in the drawer after cycles
• Leaks or puddles around the dispenser area  
• The drawer fails to open or close fully

Replace yours today with this genuine GE assembly to restore proper detergent dosing for effective cleaning performance. This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

The Impeller Cap is an OEM part for GE washers. As an integral part of the wash pump assembly, it covers and protects the impeller during operation. Located inside the wash tub, the impeller cap covers the spinning wash impeller that circulates water through the garments. 

Symptoms of a bad impeller cap include:  

• Excessive vibration or strange noises from the pump motor
• Reduced or inconsistent water pressure inside the tub  
• Broken or missing pieces found in the tub after cycles
• Premature failures of the impeller or pump bearing

Causes may involve cracks developing from mineral buildup or wear over time. Improper handling during maintenance can also warp weak points.  

This genuine GE replacement is compatible with Hotpoint, RCA and select Kenmore models.