Gtw725bsnows Parts

This lid lock striker replaces the striker that the lid lock/latch grabs to secure the washer lid during cycles, restoring reliable lid engagement so the machine can start and run safely. What it does:

• Provides the mating surface for the lid lock assembly to hold the lid closed during wash and spin cycles.
• Helps prevent the washer from starting or spinning when the lid is not properly secured.
• Commonly associated with symptoms such as lid not latching, lid lock error messages, cycles that won't start, or cycles stopping mid-cycle.
• Realigns the lid/latch interface when worn or damaged to restore proper locking action.

• Disconnect power to the washer (unplug or turn off the circuit breaker) before attempting any service.
• Access may require removing the cabinet top or an access panel per the manufacturer's instructions; keep track of fasteners and watch for sharp edges.
• Verify proper alignment of the striker with the lid latch before reassembling panels; test lid lock function after restoring power.

The Clamp is an OEM part for GE washers. It is used to securely fasten critical components like hoses, sensors, and wiring harnesses in place inside the washer cabinet. 

As a machine that handles water, chemicals, and moving parts, a washer requires many clamps to organize its internal systems. They ensure hoses and electrical wiring remain properly positioned and protected throughout years of operation. Without solid clamps, connections could loosen or detach, leading to leaks or electrical faults.

Causes of a bad clamp can include fatigue from constant vibration, outright breakage from impact or tension overload, or rust/corrosion damage over extended use. 

Symptoms of a failed clamp include:

• Loose, disconnected or damaged hoses and wiring  
• Water leaks from hose connections
• Electrical or sensor errors

The clamp is also compatible with some Kenmore and other brands that use GE components.

The Accelerometer is an OEM part for GE washers. It monitors vibration levels during cycles to ensure the tub is agitating or spinning as expected. Precise feedback allows the control board to make real-time adjustments or stop operation if an irregular vibration or shaking occurs.

Causes of a bad accelerometer can be normal wear over time, moisture or temperature damage to sensitive electronic components, or physical deformation from heavy impact. 

Symptoms include:

• Cycles failing to advance properly through agitate or spin phases  
• Excess noise or vibrating issues during washing
• Fault codes related to tub operation
• Sensitivity issues recognizing different load levels

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replacing a faulty accelerometer helps maintain smooth, balanced operation.

The Stator & Speed Sensor w/ Harness is an OEM part for GE washers. This assembly includes the stator, speed sensor, and wiring harness that connects the two components.  

The stator is the stationary outer portion of the washing machine motor that generates electromagnetic pulses to power the spinning rotor. The speed sensor detects the rotor's rotational speed and relays this data to the control board via the wiring harness. This allows the board to monitor drum movement and accurately control cycle times based on RPM.

Symptoms of a bad stator & sensor assembly include:  

• Inability to sense or achieve proper spin speeds   
• Motor “humming” but not spinning fully
• Control board errors/cycles not finishing as programmed
• Electrical burning smells during high-load spins

This OEM stator & sensor assembly is also compatible with Hotpoint, RCA, and select Kenmore washers.

This clip spring cover is a small plastic retainer that secures the spring/clip assembly on compatible appliances, helping keep moving parts aligned and reducing rattles or loose components. Replaces a worn or broken cover to restore proper fit. What it does

• Covers and holds a spring or clip in place to prevent displacement during operation
• Keeps assemblies aligned to reduce noise and intermittent part contact
• Helps maintain consistent tension where a spring or clip is used
• Commonly replaced when the original cover is cracked, broken, or missing

• One clip spring cover

• High-level replacement; basic hand tools may be required to access the location
• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Inspect adjacent springs/clips for wear and replace if damaged

8-18 hi/lo 5/8

This replacement white control panel restores the exterior control area on compatible GE ranges and ovens, improving appearance and providing a secure mounting surface for control switches and buttons. Ideal for worn, cracked, or discolored panels. What it does:

• Replaces the appliance's front control panel to restore a clean, readable control surface
• Provides the mounting surface for switches, buttons, and display components
• Helps stop drafts and debris from entering the internal control area when the original is damaged
• Commonly used when the original panel is cracked, faded, scratched, or cosmetically damaged

• Disconnect power to the appliance before starting any work
• Remove surrounding trim and mounting screws to access and replace the panel; keep hardware for reinstallation
• Handle edges carefully to avoid cuts; avoid forcing components during reassembly
• If switches, overlays, or electronic modules are attached to the old panel, verify whether they must be transferred

This replacement screw fastens appliance panels, brackets, and trim. The 8-18 thread with 1-3/4-inch length provides reliable bite in sheet metal or plastic, restoring a secure fit when an original fastener is missing or damaged.

• Secures panels, brackets, and trim to the cabinet or frame
• Replaces lost, stripped, or corroded fasteners
• Helps address loose or rattling panels, minor gaps, or misalignment
• Appropriate for sheet-metal applications that require ~1-3/4-inch reach

• Disconnect power before servicing; wear cut-resistant gloves
• Support the panel or part being fastened and use the correct driver for the screw head
• Start threads by hand to avoid cross-threading; do not overtighten into plastic or thin metal
• Repair or replace the anchor before installing

This 10-32 machine screw fastens small appliance components and replacement assemblies, restoring secure mounting and reliable electrical or panel connections. Its length fits common cabinet, control, and bracket attachments. What it does

• Secures control boards, panels, brackets, and grounding tabs using a 10-32 machine thread
• Replaces stripped or missing mounting screws that allow panels or parts to rattle or shift
• Helps restore stable electrical connections where a threaded fastener is required
• Works where a 1.31 in (approx. 1-5/16 in) long 10-32 screw is specified

• Power off and unplug the appliance before beginning any repair
• Match thread size and length to the original screw; do not force a wrong-size fastener
• Start threads by hand to avoid cross-threading; tighten securely but do not overtighten
• Use appropriate tools and wear eye protection when working on metal assemblies

This lid front corner bumper cushions the washer lid and helps reduce noise, wear and abrupt contact when the lid closes. It restores smooth, quiet operation at the lid's front corner. What it does:

• Acts as a soft contact point between the lid and cabinet to dampen impact and vibration
• Prevents metal-on-metal contact that can cause chipping, scratching or rattling
• Helps keep the lid aligned for consistent closing and latching
• Commonly replaced when the lid squeaks, chips, or does not sit flush

• Lid front corner bumper

• Disconnect power to the appliance before beginning any work
• Typically installs by hand or with light pressure into the lid or cabinet corner; use gentle force to avoid damage
• Inspect surrounding area for cracks or wear and replace other damaged bumpers if needed

This silicon controlled rectifier (SCR) switches and regulates power in compatible appliance control circuits, helping the unit deliver correct power to heating elements or motors. It's a direct replacement component when the original SCR fails. What it does

• Acts as a solid-state switch that controls current flow to heating elements, motors or other high-current circuits.
• Fails open or shorted when worn; common symptom is loss of heating, intermittent power to the controlled component, or no operation on affected circuits.
• Provides fast, repeatable switching compared with electromechanical relays.
• Designed for stud-mount installation with insulated/marked terminals for correct wiring.

• One silicon controlled rectifier (SCR) as listed.

• Disconnect all power before accessing or replacing the SCR to avoid shock or equipment damage.
• Note terminal orientation and wiring before removal; replace with the same terminal/stud configuration.
• Avoid electrostatic discharge to the replacement part; handle by the body and avoid touching terminals.

This GE Ball Joint Upper is an OEM part for GE washing machines. Designed to ensure smooth and stable movement of the washing drum, this ball joint plays a crucial role in the appliance's suspension system. 

A compromised ball joint can lead to a decline in the performance of the washing machine, making it essential to address the issue promptly.

Symptoms of a bad Ball Joint Upper include:

• Unusual noises during operation, especially during the spin cycle.
• The drum may seem to wobble or be off-balance.
• Excessive vibration of the machine, more than usual.
• Uneven wear of other suspension parts, leading to further maintenance issues.
• Potential leakage or damage to surrounding components due to misalignment.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The External Drain Hose is an OEM part for GE washers. It is responsible for directing excess water from the washer out of the home during the drain cycle. The external drain hose connects from the bottom of the washer to an external drain point, such as a standpipe, drain pump, or utility sink. 

Causes of a bad external drain hose can include cracks, leaks, or holes developing over prolonged use. Mineral buildup or contaminants inside the hose can also cause blockages.

Symptoms of a bad external drain hose include: 

• Water failing to drain or draining slowly during the cycle 
• Puddles or flooding occurring near or beneath the washer
• Strange draining noises or sounds emanating from the hose

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Leveling leg is an OEM component specifically designed for GE washing machines. This accessory provides stability for the entire unit during operation. 

Symptoms of a bad Leveling leg can include:

• Excessive tipping or leaning of the washer during operation   
• Walks or moves across a tile floor while operating  
• Deterioration like rust developing or cracks appearing

Causes involve long-term exposure to vibration and cycles of weight variations inside the washer. Over time, wearing down can potentially compromise support.

This GE replacement part is also compatible with Hotpoint, RCA and select Kenmore models. 

The Power Cord is an OEM part for GE washers. It provides the crucial connection, transmitting electrical current from the wall outlet to power the washer components and functions. Ensuring the integrity of this cord is vital for safe and reliable operation. 

Symptoms of a bad power cord include:

• Frayed, cracked, or exposed copper wiring 
• Loose connections at either end
• Buzzing, sparks, or shocks felt around the cord
• The washer fails to power on as expected

Causes can be normal flexing wear over thousands of cycles, damage from pinching, rodents, or excess tension on the cord. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.