Need Help?
Call or text
The Pressure Switch Hose is an OEM part for GE washing machines. It connects the pressure switch to the tub, allowing the switch to monitor the water level within the washing machine. This ensures the proper amount of water is used during each cycle for efficient washing and rinsing.
You should replace this pressure switch hose if it becomes cracked, clogged, or otherwise damaged. Common causes of a bad hose include wear and tear from repeated use, buildup of detergent or debris, and damage from improper handling or installation.
Symptoms of a bad pressure switch hose include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch. Read more
The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.
You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.
Symptoms of a bad compression ring include:
I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting... Read more
The Drain Pump Inlet Hose is an OEM part for GE washing machines. This hose plays a crucial role in the laundry process, ensuring that used water is efficiently removed from the washer, which helps in preventing standing water, odors, and potential mold growth inside the appliance.
Causes for issues with the drain pump inlet hose often involve natural wear and tear from constant exposure to water and laundry chemicals, physical damage from overloading or moving the washer, or blockages from lint, small garments, or other debris.
Symptoms of a malfunctioning Drain Pump Inlet Hose include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more
The Fabric Softener Dispenser is an OEM replacement part for GE washers. It is located on the top of the agitator. This dispenser allows for easy addition of fabric softener or other washing aids at the ideal time in the cycle. With a simple twist and pour into the reservoir, it then evenly releases the solution to condition clothes during the final rinse. Causes of a bad dispenser can include cracks or leaks allowing premature discharge into the wash drum. Mineral buildup may also clog the release nozzles. Symptoms of a bad dispenser include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Planning to spend hundreds on a new washer and was pleased to discover the agitator coupling was the only thing wrong. Very easy repair. The only additional feature we would have liked was a softener dispenser. Located a GE model of the same genre that used the same coupler and took the leap to get the agitator and dispenser cup for this model (WJRR4170). Replaced the old agitator with new one and dispenser cup. Worked perfectly! We now have a washer with dispenser that works great and saved... Read more
The Belt Installation Tool is an OEM replacement part for GE washers. It provides the necessary leverage and positioning for hassle-free belt replacement.
Causes of needing this tool include belts that become cracked or loose over repeated use. Proper belt tension is critical for efficient spinning and drying cycles.
Symptoms of needing this tool include:
I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more
The Lid Switch Magnet is an OEM part for GE washing machines. This magnet interacts with the lid switch to signal that the washer lid is closed, allowing the washing cycle to begin.
Causes of a bad lid switch magnet can include wear and tear from frequent use, physical damage, or loss of magnetism over time. A malfunctioning magnet can prevent the washer from detecting a closed lid, thereby interrupting the wash cycle.
Symptoms of a bad Lid Switch Magnet include:
Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in. Read more
The Suspension Rod and Spring Assembly is an OEM part for GE washing machines. This assembly is crucial for maintaining the stability of the washing machine drum during the wash and spin cycles by absorbing vibrations and reducing movement.
Over time, these components can wear out due to frequent use, heavy loads, or unbalanced loads that place excessive strain on the rods and springs. Replacing a faulty suspension rod and spring assembly ensures the washing machine operates smoothly and quietly.
Symptoms of a bad suspension rod and spring assembly include:
The Mode Shifter & Shaft Assembly is an OEM replacement part for GE washing machines. It is a mechanical component located inside the washer tub that allows for shifting between agitation, spin, and other cycles. The mode shifter and shaft assembly receive input from the control system to precisely change the operational mode at designated points in the cycle. Causes of a bad mode shifter & shaft assembly include worn out or damaged internal gears, stripped or broken shafts, or a loss of integrity in components that restrict smooth shifting between modes. Symptoms of a bad mode shifter & shaft assembly include:
Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more
The GE screw is an OEM replacement part responsible for securing various components or parts together on a washing machine. Its main function is to connect and hold together various parts, panels, or brackets, ensuring that they remain securely in place during the appliance's operation. The screw comes in the size 1/4-20 MCH HXW 5/8 S, indicating its thread size, head type, and length.
This part fixes the following symptoms:
The GE washing machine screw can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
My husband put the new agitator together and it is working great, thanks for having all the part I needed. Susie Read more
The Switch Pressure is an OEM part for GE washing machines. It monitors the water level inside the washer and communicates with the control board to adjust the water input accordingly, ensuring the correct amount of water for each wash cycle.
Causes of a bad pressure switch can include electrical failures, blockages in the pressure hose, or wear and tear from regular use. A malfunctioning pressure switch can disrupt the washer's ability to fill or drain properly, leading to performance issues.
Symptoms of a bad pressure switch include:
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws. Read more
The Screw is an OEM part for GE appliances, commonly used in washing machines, dryers, and other household appliances. This screw is designed to secure various components, ensuring they remain properly aligned and fastened during operation. Its precise design and durable construction are tailored to meet the specific requirements of GE appliances.
Over time, screws can become damaged or lost due to regular use, vibration, or during maintenance and repair activities. A missing or damaged screw can lead to loose parts, affecting the overall functionality and safety of the appliance.
Symptoms of a bad or missing screw include:
Put new hose on. It was the kind that pushed in and had a flange on it with two screws. Read more
The Water Inlet Valve is an OEM replacement part for GE washing machines. As the valve responsible for regulating water flow into the washer, it plays an important role in allowing cycles to run properly. Causes may involve mineral buildup clogging the valve over time, damage to internal components, or deterioration of valve seals. Replacing with this genuine GE part ensures optimal water input for thorough, effective cleaning cycles. Symptoms of a bad water inlet valve include:
I watched your video and I replaced the water inlet valve. The problem is now fixed. It took about 5 minutes to replace. I am a 60yr old woman and it was an easy fix. Read more
The Suspension Rod Support is an OEM part for GE washing machines. This part maintains the stability of the washing machine's drum by supporting the suspension rods, which help absorb vibrations and shocks during operation.
Causes of a bad suspension rod support can include wear and tear from regular use, corrosion due to exposure to moisture, or physical damage from overloading the washer.
Symptoms of a bad suspension rod support include:
The Rod & Spring Assembly is an OEM part for GE washing machines. This assembly helps stabilize and support the washer tub during the spin cycle, reducing vibrations and maintaining balance to ensure smooth operation. Each assembly measures approximately 26.5 inches in length
Common causes of failure include wear and tear from frequent use, damage due to unbalanced loads, or weakening of the springs over time. A malfunctioning rod and spring assembly can lead to excessive movement and noise during the wash cycle.
Symptoms of a bad Rod & Spring Assembly include:
I shopped around a bit - found one retailer that only had 1 shock in stock, another that only stocked the front shocks, etc. There is definitely a difference in the springs between the green colored and white colored shocks! I've torn this washer down before, so I'm fairly familiar with how it's put together. I've seen some of the You-tube videos on replacing this item, and some of the videos show far more disassembly than is required. I only removed the front, top, and controls, and... Read more
The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.
My son fixed it Read more
The Tub Dampening Strap Retainer is an OEM part for GE washing machines. This part holds the tub dampening straps in place, which help to stabilize the washing machine tub during operation.
Causes of a bad retainer can include regular wear and tear, physical damage from heavy loads or impacts, and degradation over time.
Symptoms of a bad tub dampening strap retainer include: