Gtwnn5550d0ww Parts

The GE screw is an OEM replacement part responsible for securing various components or parts together on a washing machine. Its main function is to connect and hold together various parts, panels, or brackets, ensuring that they remain securely in place during the appliance's operation. The screw comes in the size 1/4-20 MCH HXW 5/8 S, indicating its thread size, head type, and length.

This part fixes the following symptoms:

• Loose or wobbly components on the washing machine
• Difficulty in assembling or disassembling parts due to missing or faulty screws
• Certain parts becoming detached or separating during use
• The washing machine vibrating excessively during use
• Doors, panels, or knobs not staying securely in place

The GE washing machine screw can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This shaft and tube assembly supports and drives the washer's inner basket during the spin cycle. Replacing a worn or bent assembly restores smooth rotation and helps reduce noise, vibration, and basket wobble.

• Supports and centers the inner tub for stable spinning
• Provides the rotating drive surface that turns the basket in spin
• Works with the washer's drive system to deliver spin power
• Common symptoms: no or weak spin, scraping/grinding noises, excessive vibration, or basket wobble

• Disconnect power and water supply before servicing; wear gloves and eye protection
• Access typically requires removing the top/console, agitator or wash plate, inner basket, and retaining hardware
• Inspect related parts and replace if worn or leaking during reassembly
• After installation, level the washer and run a spin test to check for proper operation and leaks

The Pressure Switch is an OEM part for GE washing machines. This part ensures your machine fills with the correct amount of water for the selected cycle, preventing overfilling or insufficient water levels that can lead to suboptimal washing results.  

A faulty Pressure Switch can result from several issues, including clogging with detergent residue or debris, wear and tear from regular use, or electrical malfunctions affecting its responsiveness.  

Symptoms of a malfunctioning Pressure Switch include:

• The washing machine overfilling or not filling enough
• Wash cycles starting or stopping unexpectedly
• Water levels not matching the selected cycle
• The machine failing to move to the next cycle stage

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Switch Pressure is an OEM part for GE washing machines. It monitors the water level inside the washer and communicates with the control board to adjust the water input accordingly, ensuring the correct amount of water for each wash cycle.

Causes of a bad pressure switch can include electrical failures, blockages in the pressure hose, or wear and tear from regular use. A malfunctioning pressure switch can disrupt the washer's ability to fill or drain properly, leading to performance issues.

Symptoms of a bad pressure switch include:

• The washer not filling with water or overfilling
• The washer not advancing through the cycles
• Inconsistent water levels during the wash cycle
• Error codes related to water level issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Funnel Shower Head Assembly is an OEM replacement part for GE washers. This assembly includes the shower head and mounting bracket that delivers water directly to the load for optimal cleaning. 

Causes of a bad shower head assembly can include mineral buildup or obstructions in the spray nozzles, cracks or damage to the plastic shower head itself, or a loose or faulty connection to the washer water inlet.  

Symptoms of a bad shower head assembly include:

• Inadequate or uneven water spray distribution during the wash cycle 
• Leaks or drips from the shower head area
• Reduced cleaning performance 

This replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Inlet Valve is an OEM replacement part for GE washing machines. As the valve responsible for regulating water flow into the washer, it plays an important role in allowing cycles to run properly.

Causes may involve mineral buildup clogging the valve over time, damage to internal components, or deterioration of valve seals. Replacing with this genuine GE part ensures optimal water input for thorough, effective cleaning cycles.

Symptoms of a bad water inlet valve include:

• Inconsistent or interrupted water fill during cycles
• Prolonged fill times or inability to reach proper water levels
• Dripping or leaking from the inlet area of the washer
• Cycles failing to start or complete normally due to water issues

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Suspension Rod Support is an OEM part for GE washing machines. This part maintains the stability of the washing machine's drum by supporting the suspension rods, which help absorb vibrations and shocks during operation.

Causes of a bad suspension rod support can include wear and tear from regular use, corrosion due to exposure to moisture, or physical damage from overloading the washer.

Symptoms of a bad suspension rod support include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or "walking" during operation
• The drum being off-balance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Screw is an OEM part for GE appliances, commonly used in washing machines, dryers, and other household appliances. This screw is designed to secure various components, ensuring they remain properly aligned and fastened during operation. Its precise design and durable construction are tailored to meet the specific requirements of GE appliances.

Over time, screws can become damaged or lost due to regular use, vibration, or during maintenance and repair activities. A missing or damaged screw can lead to loose parts, affecting the overall functionality and safety of the appliance.

Symptoms of a bad or missing screw include:

• Loose or rattling components
• Misalignment of parts
• Noise during operation
• Parts or panels not staying securely in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rod & Spring Assembly is an OEM part for GE washing machines. This assembly helps stabilize and support the washer tub during the spin cycle, reducing vibrations and maintaining balance to ensure smooth operation. Each assembly measures approximately 26.5 inches in length

Common causes of failure include wear and tear from frequent use, damage due to unbalanced loads, or weakening of the springs over time. A malfunctioning rod and spring assembly can lead to excessive movement and noise during the wash cycle.

Symptoms of a bad Rod & Spring Assembly include:

• Excessive shaking or vibrating during the spin cycle
• Loud banging noises
• Washer tub being off-balance or sagging
• Increased movement of the washer during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the short agitator cap for select top-load washers. It covers the top of the agitator to keep water and debris out of the agitator hub, preserving proper wash action and a clean appearance.

• Seals the agitator opening to prevent moisture and detergent buildup inside the agitator
• Helps maintain correct agitation by keeping the hub area protected
• Common signs it's needed: missing or loose cap, cracked or warped cap, water or residue collecting inside the agitator

• Unplug the washer before servicing
• Pull the old cap straight up to remove; some may require gentle prying
• Press the new cap firmly into place until fully seated
• Inspect the agitator hub for debris and clean before installing the new cap

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

This washer drain hose carries used water from the drain pump to your home standpipe or laundry sink. Replacing a cracked, kinked, or leaking hose restores proper draining and helps prevent puddles and water damage.

• Directs wastewater from the washer during drain and spin cycles
• Replaces a hose that is split, brittle, kinked, or clogged
• Symptoms can include slow or no draining, water leaks during drain, or water left in the tub
• Visible wear or punctures on the hose indicate replacement is needed

• Unplug the washer and turn off water; pull the unit forward for access
• Expect residual water—use towels or a shallow pan
• Move the hose at the drain pump outlet and route to the standpipe or sink; secure with existing clamp/retainer
• Ensure a smooth, unkinked run with a proper high loop; test a drain cycle and check for leaks

The Pulsator Coupling is an OEM replacement part for GE washing machines. It is a component located inside the washer tub that allows for the connection and movement of the agitator. The coupling pulsator works with the drive motor to rotate the agitator back and forth during the wash cycle, helping to thoroughly clean clothes through agitation.

Causes of a bad pulsator coupling include wear and tear over time, damage due to impact or foreign objects getting lodged in the mechanism, or deterioration of internal components that restrict proper movement.

Symptoms of a bad pulsator coupling include:

• The agitator not spinning or rotating as it should
• Grinding or clicking noises coming from the tub area
• Vibrations felt in the top of the washer
• Improper agitation, resulting in poor cleaning performance

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Assembly is an OEM part for GE washing machines. This part is the lid of the washer. It is essential for securely covering the washer drum, preventing water from splashing out during the wash cycle, and allowing safe operation by ensuring the washer does not run with the lid open.

Causes of a bad lid assembly can include general wear and tear, physical damage from heavy loads or impacts, or issues with the hinges or latch mechanisms.

Symptoms of a bad lid assembly include:

• Difficulty in opening or closing the lid
• Washer not starting or stopping mid-cycle due to a faulty lid switch
• Visible cracks or damage on the lid
• Water leaking from the top of the washer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

A replacement baffle screw and flat washer used to secure the baffle or trim piece in ovens and ranges. Restores proper attachment to reduce vibration and keep the baffle aligned for normal operation. What it does

• Secures the baffle or trim to the oven/range body and prevents movement or rattling.
• Replaces missing, stripped, or corroded mounting hardware that can cause loose or misaligned baffles.
• Helps maintain a tight fit so trim and baffle sit flush with surrounding panels.
• Small, direct-replacement fastener for original baffle mounting points.

• Disconnect power and allow the appliance to cool before accessing internal panels.
• Use the matching size screwdriver; start threads by hand to avoid cross-threading.
• Tighten until snug — avoid over-tightening, which can strip threads or deform the washer.
• Repair or replace the mounting bracket before installing this hardware.