Gud27essm/27Gssm Parts

The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance. 

Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching. 

Symptoms of a bad Door Latch include:

• The dryer door doesn't stay closed during cycles.
• Difficulty in starting the dryer due to the door not activating the safety switch.
• Visible wear or damage to the latch mechanism.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drive Belt is an OEM replacement part for GE laundry centers. The belt is specifically designed to fit and function optimally in the compact design of GE laundry centers.

Causes for a malfunctioning Drive Belt can include wear and tear from regular use, overloading the dryer, causing strain on the belt, or the belt becoming misaligned or dislodged from its track.

Symptoms of a bad Drive Belt include:

• The dryer drum failing to turn even though the motor is active
• A thumping or squealing noise during the dryer's operation
• The dryer not starting or failing to produce heat
• Clothes remaining damp after the cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dual Coil Water Valve is an OEM replacement part for GE washing machines. It is a solenoid valve that controls the flow of hot and cold water to the washer.

Symptoms of a faulty valve include: 

• Failure to adequately fill or drain the wash tub
• Imprecise washing from too much or too little water  
• Oversudsing or excess vibration due to unbalanced levels

Causes can be worn seals or mineral buildup impeding proper valve movement after extended use.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer is an OEM part for GE electric dryers. It serves as the critical control module that monitors and regulates dryer cycle times during functions like regular, wrinkle guard, fluff and more.

Causes of a bad timer include failure of internal electronic components or wiring connections due to prolonged exposure to heat and vibration inside the dryer cylinder. Mechanical wear of buttons or dials used to program cycles may occur as well over time.

Symptoms of a bad Timer include:

• Inability to set or change desired drying times accurately
• Premature stopping or starting of cycles without user input
• Faulty time or status display windows during use
• Complete shut down requiring manual override or reset

The GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

The Filter Lint is an OEM replacement part for GE dryers. Located inside the dryer cabinet behind the lint screen, the lint filter traps microscopic fabric dust and residue. It plays a supportive role in protecting internal components from lint buildup.

Causes for lint filter replacement may be an excessively loaded filter obstructing airflow. Regular cleaning helps prolong the life of this consumable part.

Symptoms include:

• Slow or incomplete drying times even on high heat settings
• Reduced air venting due to a clogged lint filter
• Muffled operation from restricted airflow passageways
• Fabric dust accumulating in undesirable areas inside the dryer

Compatible GE branded models include profiles, Café, and Kenmore dryers as well.

The Pump Drain is an OEM part for GE washing machines. This component is responsible for removing water from the washer drum during the drain cycle, ensuring that the water is efficiently expelled from the machine. The pump drain plays a crucial role in the washing machine's ability to complete its cycles and maintain optimal performance.

Over time, the pump drain can become clogged, worn out, or damaged due to regular use or foreign objects obstructing the pump. Common causes of a bad pump drain include buildup of debris, wear and tear on the pump mechanism, or blockages from items accidentally left in pockets.

Symptoms of a bad pump drain include:

• Water not draining from the washer
• Unusual noises during the drain cycle
• The washer stopping mid-cycle due to drainage issues
• Water leaking from the bottom of the washer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Board & Support Assembly is an OEM replacement part for GE washer/dryer combination laundry centers. This assembly features both the control board and its supporting structure. The control board is responsible for managing a variety of functions for both the washing machine and dryer, including cycle selection and timing, while the support secures the board in its proper position.

Causes for a malfunctioning Board & Support Assembly can include electrical issues like short circuits or power surges, as well as physical damage from impact or mishandling.

Symptoms of a bad Board & Support Assembly include:

• Difficulty in selecting or initiating wash or dry cycles
• Unresponsive or malfunctioning buttons on the control panel
• Error messages appearing on the display
• Inconsistent performance in either the washer or dryer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Front Drum Support is an OEM part for GE dryers. It supports the front of the dryer drum, allowing it to rotate smoothly during the drying cycle. This support helps maintain the drum's position and alignment, ensuring efficient and quiet operation.

You should replace the front drum support if it becomes worn out or damaged. Causes of a bad drum support can include regular wear and tear from continuous use, overloading the dryer, or debris causing friction and damage.

Symptoms of a bad front drum support include:

• Unusual noises such as squeaking or grinding during operation
• The drum not rotating smoothly or becoming misaligned
• Clothes taking longer to dry or uneven drying
• Visible wear or damage to the support structure

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cycling Thermostat is an OEM replacement part for GE dryers. It regulates heating element output and drum temperature during drying cycles. Maintaining proper air and drum temperatures is key to achieving thorough moisture removal from fabrics within targeted cycle times.

Causes of failure typically involve defects developing over many heat exposure and cool-down cycles. Mineral deposits accumulating on the thermostat head can also impact heat-sensing precision over extended use. 

Symptoms of a bad cycling thermostat include:

• Slow or inadequate drying times
• Excessively long cycles for normal loads  
• The dryer turning on/off irregularly while operating
• Unpredictable or fluctuating drum temperatures

This OEM replacement thermostat is compatible with GE, Hotpoint, and some Kenmore models.

The UI Board Assembly is an OEM part for GE electric and gas laundry centers. Located inside the combined washer/dryer cabinet, the UI board directs all washing and drying functions through a centralized control interface. Coordinating two appliances requires a robust control system.

Causes for replacement can include circuit failure from accumulated moisture exposure over many years of use. The humid environment inside a laundry center puts a greater strain on electronic parts.

Symptoms of a faulty UI board include:

• Inoperable or unresponsive control panel  
• Failure to start wash or dry cycles
• Inability to adjust settings for either appliance
• Random starting or stopping during operation

This genuine GE part restores full customized functionality for both the washer and dryer. Whether drying laundry efficiently or completing extra large loads, dependable controls are crucial. Compatible with most GE electric and gas laundry center models, this replacement maintains long-term reliability.
 

The Agitator Kit is an OEM part for GE washing machines. It contains the agitator shaft and center bolt. These agitator components play an important role in the washing process, generating powerful motion to loosen and remove stain-causing residues from clothing loads.

Causes of a faulty agitator include excessive wear and tear over repeated usage, accidental damage from overloading or foreign objects, or corrosion from mineral buildup.

Symptoms of agitator issues consist of:

• Vibration or shaking during spin cycles
• Improper washing action and ineffective cleaning
• Difficulty loading/unloading due to agitator binding
• Visible cracks or breaks in agitator parts

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Rod Assembly 27" is an OEM replacement part for GE washing machines. This assembly is designed to support the washer tub, helping to stabilize it during the wash and spin cycles. It plays a crucial role in maintaining the balance of the machine, thereby reducing vibrations and ensuring smooth operation.

Over time, rod assemblies can wear out or become damaged due to constant movement and heavy loads. Causes of a bad rod assembly include normal wear and tear, unbalanced loads that place excessive strain on the rods, or damage from mishandling.

Symptoms of a bad Rod Assembly include:

• Excessive vibrations during wash or spin cycles
• Loud banging or thumping noises
• The washing machine appearing unbalanced or shaking
• Inefficient washing due to tub instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small replacement magnet works with the washer's lid/door lock sensor to ensure the lid or door is closed. Restores proper safety interlock operation so cycles can start and spinning is allowed. What it does:

• Triggers the lock/switch sensor so the control knows the lid/door is closed
• Helps prevent operation with an open lid/door
• Common symptoms of a failed/missing magnet: won't start or spin; "lid/door open" indications; intermittent pausing
• Replacing a weak, cracked, or missing magnet restores reliable closure sensing

• One magnet

• Disconnect power before servicing
• Access the magnet location in the lid/door area; note the original orientation
• Seat the new magnet fully in its holder; reuse any existing clip or fastener
• Reassemble and test that the lock engages and the lid/door-closed indicator is recognized

This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.

• Maintains proper tension on the shift mechanism between agitate and spin
• A worn or broken spring can cause no spin, no agitate, or loud shifting noises
• May also lead to intermittent shifting or incomplete cycles
• Restores consistent mechanical engagement of the drive system

• Unplug the washer and shut off water supply before servicing
• Access is typically from the cabinet/rear; support the tub to prevent movement
• Note spring orientation and attachment points before removal
• Use needle-nose pliers or a spring tool; replace any severely worn mating parts

Replace a failed heating element with this Heater and Housing Assembly. It restores proper electric heat and airflow through the drum so loads dry evenly and within a normal cycle time. What it does:

• Generates heat as air moves through the element canister
• Replaces a broken, shorted, or open heater to restore drying performance
• Typical symptoms: no heat, very long dry times, drum tumbles but stays cool
• Often confirmed by an open (no continuity) reading on the element with a multimeter

• One heater and housing assembly

• Disconnect power by unplugging the dryer or switching off the circuit breaker; allow the unit to cool
• Access the heater housing, label wire positions, and remove mounting fasteners to swap the assembly
• Transfer any reusable brackets or hardware from the old unit as required by your model
• After installation, confirm good airflow and clean the vent/duct to prevent overheating and repeat failures

The Speed Sensor is an OEM replacement part for GE washing machines. It regulates the rotation speed of the wash basket during various cycles like agitation, spin, and rinse modes. Precise speed control allows the washer to thoroughly clean laundry efficiently while preventing damage.

Causes of a bad speed sensor can include wear and tear of internal components from heavy or unbalanced loads over time. Improper installation during manufacturing may also lead to unexpected failures.

Symptoms of a bad speed sensor include:

• The washer failed to agitate, spin, or rotate the basket
• Inconsistent or fluctuating basket speeds
• Vibration and noise during operation
• Inability to complete full cycles

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.