Jcspurnyhotmailcom Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Infinite Switch (8")

5.0 (174)

By: Ge

Part Number: WB24T10025

The Infinite Switch (8") is an OEM replacement part for GE stovetops. It is responsible for controlling the heat output of the burner. The switch allows you to adjust the heat level by turning the knob, regulating the amount of power supplied to the burner. A bad infinite switch can be caused by regular wear and tear, electrical issues, or overheating. It can also become damaged if exposed to moisture.

Symptoms of a bad infinite switch include:

The burner not heating up
The burner staying on at the highest heat setting
The burner not turning off or not responding
Visible signs of damage

Causes of a bad infinite switch can include normal wear and tear over time, exposure to excessive heat or moisture, or electrical malfunctions.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You The heating element where boiling hot at any seting of the knob Christopher H. • Lawrence , KS • August 17, 2014

I replace the Infinite Switch and that seems to be the trick for keeping the temperture under control. Read more

$34.49

Compare At:: $41.39
You Save:: $6.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Control Board

4.9 (195)

By: Ge

Part Number: WB27X45466

The Control Oven TO9 is an OEM part for GE ranges. This part manages the oven's various functions, including temperature regulation, cooking modes, and timer settings. It serves as the central interface for the user to control the oven's operations, ensuring precise and reliable cooking performance.

Causes of a bad control module can include electrical surges, general wear and tear, or physical damage from impacts or spills.

Symptoms of a bad control oven module include:

Unresponsive or malfunctioning buttons and dials
Incorrect temperature readings or inconsistent heating
Display not functioning properly
Oven not turning on or shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014

Replaced control board myself. Easy. Read more

$133.21

Compare At:: $158.52
You Save:: $25.31

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 In. Large Burner Bowl

5.0 (202)

By: Ge

Part Number: WB31T10011

The 8 Inch Large Burner Bowl is an OEM replacement part for GE ranges and cooktops. This component is designed to accommodate the larger burners on the cooking surface, providing a stable and safe platform for pots and pans during cooking.

Symptoms of needing to replace the 8 inch large burner bowl include:

Cracks, chips, or damage to the bowl's surface
Warping or deformation due to excessive heat
Difficulty in properly positioning pots and pans on the burner

Causes of a faulty burner bowl can include normal wear and tear over time, exposure to extreme temperatures or thermal shocks, or physical damage due to impact or mishandling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range and cooktop models.

Do-It-Yourself Stories from Customers like You Just extremely old and ugly burner trays James B. • Corinth , TX • November 17, 2014

I spent hours searching for the right trays, knowing only that the stove is GE, and what the trays look like, including exact dimensions. I ordered one set that had exact measurements, and they even explained how the measurements are taken. But the trays were larger than described by 3/8 inch, and I had to pay shipping to return them. I suggested that they correct their description, but the lady did not think I was right. I said just measure them yourself, as per the method that your... Read more

$12.44

Compare At:: $16.04
You Save:: $3.60

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Cerama Bryte Cooktop Cleaner

4.9 (306)

By: Ge

Part Number: PM10X310

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.

Do-It-Yourself Stories from Customers like You Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016

VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more

$14.78

Compare At:: $17.44
You Save:: $2.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

6 Inch Small Burner Bowl

4.9 (189)

By: Ge

Part Number: WB31T10010

The 6 Inch Small Burner Bowl is an OEM part for GE stoves and ranges. It is a durable and heat-resistant bowl that sits beneath the heating element of the small burner, providing a stable and level surface for your cookware. The small burner bowl helps distribute heat evenly and protects the cooktop from spills, stains, and other messes. For the matching 8-inch large burner bowl order WB31T10011.

A bad small burner bowl can be caused by regular use, accidental damage, or it may become discolored, warped, or rusted over time.

Symptoms of a bad small burner bowl include:

Difficulty in cleaning or removing stubborn stains.
A loose or wobbly heating element.
Visible damage such as cracks or chips on the bowl.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Just extremely old and ugly burner trays James B. • Corinth , TX • November 17, 2014

$10.37

Compare At:: $15.37
You Save:: $5.00

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (319)

By: Ge

Part Number: WB44K5012

The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.

Symptoms of a failing oven bake element include:

Oven not heating up properly or taking longer to heat
Uneven cooking or baking
Element not glowing or only partially glowing during operation
Visible signs of blistering, cracks, or holes on the element

Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Oven is too hot
Won't start

Do-It-Yourself Stories from Customers like You Element burn into Richard D. • Summerville , GA • April 02, 2014

Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro Read more

$61.64

Compare At:: $73.97
You Save:: $12.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Range Surface Burner Control Switch

4.9 (77)

By: Ge

Part Number: WB24T10029

The Range Surface Burner Control Switch is an OEM part for GE ranges. This switch manages the temperature of the surface burners on your range, providing the ability to adjust the heat level. Whether you're simmering sauces or boiling water, the control switch ensures precise temperature management, enhancing your cooking experience.

The causes of a faulty burner control switch often include prolonged use leading to wear on the electrical contacts, exposure to moisture causing short circuits, or physical damage from impact or excessive force when turning the knob.

Symptoms of a bad surface burner control switch:

The burner not turning on or off
Inability to adjust the heat level, with the burner staying at one temperature regardless of the knob setting.
Intermittent burner function

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Large dual burner Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

$37.26

Compare At:: $45.52
You Save:: $8.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Surface Burner Terminal Block Kit

4.8 (90)

By: Ge

Part Number: WB17T10006

The Terminal Block Kit is an OEM replacement part for GE electric ranges. This kit replaces the points of connection delivering power to control circuits and surface coil elements atop the cooktop.

Causes of failure are prolonged heat cycling which slowly breaks down solder joints and insulator coating on terminals conducting power. Liquids spilled can seep into connection areas over time promoting electrical faults.

Symptoms of a faulty terminal block include:

Inability to ignite or regulate specific burners
Burners that glow intermittently or fail to respond
Tripped circuit breakers upon use of problematic zones
Buzzing or cracking noises from under cooktop areas

This genuine GE kit is also compatible with Hotpoint and RCA electric ranges.

This part fixes the following symptoms

Element will not heat
Won't start

Do-It-Yourself Stories from Customers like You THE TERMINAL BLOCK WAS BURN AND IT DOES NOT TURN HOT. Kenny W. • San Jose , CA • April 06, 2014

I ORDER THE TERMINAL BLOCK KIT, AND FOLLOW THE VIDEO HOW TO REPAIRE. IT IS VERY EASY.IT TOOK ME 10 MIN. Read more

$19.54

Compare At:: $25.40
You Save:: $5.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 Inch Large Surface Element

4.9 (120)

By: Ge

Part Number: WB30M2

The 8 Inch Large Surface Element is an OEM part for GE ranges and cooktops. This heating element is used on the cooktop to provide a consistent heat source for cooking. It fits into the designated spot on the stove and connects to the electrical system, allowing users to control the temperature for various cooking needs.

Causes of a bad surface element can include wear and tear from frequent use, electrical malfunctions, or damage from spills and food debris. Overheating or accidental impacts can also impair its functionality.

Symptoms of a bad 8 Inch Large Surface Element include:

The element not heating up
Uneven heating or hot spots on the element
Sparks or electrical noises when the element is in use
Visible damage or burns on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015

Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale. Read more

$51.95

Compare At:: $77.98
You Save:: $26.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Temperature Sensor

4.9 (69)

By: Ge

Part Number: WB23T10015

The Temperature Sensor is an OEM part for GE ovens. It plays a role in monitoring and regulating the oven's internal temperature, ensuring accurate heating and cooking performance. This sensor works by detecting the temperature inside the oven cavity and communicating with the main control board to maintain the set temperature throughout the cooking process.

Causes of a bad Temperature Sensor can include exposure to extreme temperatures leading to sensor failure, wear and tear over time, or damage from oven cleaning agents or spills that may affect its functionality.

Symptoms of a bad Temperature Sensor include:

Oven not reaching the set temperature.
Overheating or underheating, leading to unevenly cooked food.
Frequent error messages from the oven's electronic control.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking

Do-It-Yourself Stories from Customers like You GE Monogram oven temp was too low and it took a long time to cook food. Kathleen A. • Saratoga , CA • January 11, 2023

In the middle of Christmas baking, I noticed that it was taking a really long time to bake bread. Since I had already done 5 batches and the timing was always the same, I knew when I had to add 20 min, something was wrong. My oven thermometer (I bought at target) no longer worked so it was hard to tell the exact temperature. First, I went and bought a new thermometer to see the actual temp, then I set the oven to 350 degrees and checked to see what the thermometer was showing. It was almost 50... Read more

$22.36

Compare At:: $28.07
You Save:: $5.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Sensor Assembly

4.8 (60)

By: Ge

Part Number: WB21X5301

The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.

Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.

Symptoms of a bad Oven Sensor Assembly include:

The oven temperature is inconsistent with the setting
Food is not cooking evenly or as expected
The oven fails to heat to the set temperature
Error codes appearing on the oven display related to temperature regulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014

Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly. Read more

$123.00

Compare At:: $179.02
You Save:: $56.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bowl Burner 8 (Ch)

4.9 (74)

By: Ge

Part Number: WB31K10266

The 8" Burner Bowl is an OEM replacement part for GE ranges and cooktops. It is responsible for safely collecting and containing grease and cooking liquids below the burner.

Causes can include damage or deformation from repeated high heat exposure over time.

Symptoms of a bad drip pan include:

Grease or liquids leaking outside of the drip pan area
Warping or bending that prevents proper placement below the burner
Inability to fully trap and contain grease and cooking residue
Accelerated buildup or residue that impacts burner performance

This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed new burner bowls and elements Bill H. • Clarksville , TN • February 26, 2015

Ordered all the parts Read more

$9.95

Compare At:: $11.84
You Save:: $1.89

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

8 Inch Burner Bowl

4.9 (68)

By: Ge

Part Number: WB31T10015

The 8 Inch Burner Bowl is an OEM part for GE ranges and cooktops. This part sits beneath the heating element to catch spills, drips, and crumbs that fall during cooking. Not only does it facilitate easier cleanup, but it also plays a role in reflecting heat back to the cookware, enhancing cooking efficiency.

Causes of a bad 8-inch burner bowl can include the accumulation of cooked-on spills and debris, rust and corrosion from moisture exposure, as well as warping or physical damage that affects fit and function.

Symptoms of a bad 8 Inch Burner Bowl include:

Poor fit on the stove, affecting stability of pots and pans
Difficulty in cleaning due to excessive staining or corrosion
Reduced heating efficiency if the bowl no longer reflects heat effectively

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Needed new burner bowls Deborah S. • Auburn , MA • January 25, 2015

Ordered the burner bowls from you (after purchasing some locally that did not fit and were very flimsy). These bowls were very well made and fit perfectly. Heavy construction. Appears they will last a long time. Will order anything for my appliances from you in the future. Read more

$10.95

Compare At:: $15.37
You Save:: $4.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

6 Inch Small Surface Element

4.9 (83)

By: Ge

Part Number: WB30M1

The 6-Inch Small Surface Element is an OEM part for GE cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This heating element fits into the designated slot on the cooktop and is used for preparing smaller dishes or for simmering.

You should replace the surface element if it becomes faulty. Causes of a bad surface element can include wear and tear from regular use, electrical issues, or damage from overheating. A malfunctioning surface element can lead to uneven cooking, insufficient heat, or the element not heating up at all.

Symptoms of a bad 6-inch small surface element include:

The element not heating up or only heating intermittently
Visible damage such as burn marks or deformation
Uneven heating or hotspots on cookware
The element not fitting securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Matching 8-inch surface element - WB30M2; terminal block - WB17X5113

Do-It-Yourself Stories from Customers like You Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015

$39.63

Compare At:: $61.80
You Save:: $22.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

6" Burner Bowl

4.9 (75)

By: Ge

Part Number: WB31K10265

The 6" Burner Bowl is an OEM part for GE cooktops and ranges. It is designed to sit beneath the heating element, catching spills and drips that occur during cooking. This helps to keep the cooktop clean and ensures that the heating element functions properly by preventing food debris from interfering with its operation.

Over time, burner bowls can become discolored, warped, or corroded due to exposure to high heat and spills. Additionally, frequent cleaning or scraping can cause scratches and other damage, which may compromise their ability to effectively catch spills and support the heating element.

Symptoms of a bad burner bowl include:

Discoloration or charring
Warping or misalignment with the heating element
Difficulty in fitting the bowl securely in place
Residue buildup that is difficult to clean

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Notes:

For the matching 8” drip pan, order WB31K10266.
Surface elements:
6": WB30M1; 8"WB30M2.
Element terminal block: WB17X5113.

Do-It-Yourself Stories from Customers like You Needed new burner bowls and elements Bill H. • Clarksville , TN • February 26, 2015

Ordered all the parts Read more

$10.69

Compare At:: $12.83
You Save:: $2.14

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jcspurnyhotmailcom Parts

Appliance Light Bulb

Infinite Switch (8")

Oven Control Board

8 In. Large Burner Bowl

Cerama Bryte Cooktop Cleaner

6 Inch Small Burner Bowl

Oven Bake Element

Range Surface Burner Control Switch

Surface Burner Terminal Block Kit

8 Inch Large Surface Element

Temperature Sensor

Oven Sensor Assembly

Bowl Burner 8 (Ch)

8 Inch Burner Bowl

6 Inch Small Surface Element

6" Burner Bowl