Jgd 8430 Adb Parts

Replacement burner valve that controls gas flow to a surface cooktop burner, restoring reliable flame control for safer, consistent cooking. Use this valve when a burner has low or no flame, uneven flame, or won't respond to knob adjustments. What it does:

• Regulates gas flow to a single surface burner so you can adjust flame size and cooking heat.
• Replaces valves that cause burners to fail to light, produce weak or sputtering flames, or not change flame level.
• Restores normal burner operation when the original valve is worn, leaking, or damaged.
• Compatible with gas cooktops and ranges.

• Turn off the gas supply and unplug the appliance before starting any repairs.
• Use appropriate hand tools; avoid overtightening fittings or damaging gas lines.
• After installation, check all connections for leaks (soap-and-water test) and verify proper burner ignition and flame.

Replacement top surface burner valve that controls gas flow to a single surface burner for safe, consistent flames. Restores burner operation when the control knob no longer ignites or adjusts the flame. What it does:

• Regulates gas flow from the manifold to one top/surface burner so the flame lights and responds to the control knob.
• Replaces valves that stick, fail to open/close, or stop adjusting flame size.
• Common symptoms this part can address: burner won't light, knob turns without affecting flame, flame too low or uneven.
• If you smell gas or suspect a leak, shut off the gas immediately.

• (1) top surface burner valve

• Shut off the gas supply and disconnect power to the appliance before starting; relieve any residual pressure per your appliance instructions.
• Use correct tools and replacement gaskets/seals where required; only install if part number matches your model.
• After installation, check all connections for leaks using a safe leak-test method (soapy water), not an open flame.

This rotary switch replaces a worn or failed control selector, restoring reliable selection of cycles and settings on compatible Whirlpool appliances. It provides the same mounting and terminal layout as the original part. What it does:

• Selects and maintains the chosen cycle or setting when turned
• Transfers user inputs to the appliance control for cycle start and function selection
• Common symptom fix: selector won't turn, slips, or fails to engage settings
• Common symptom fix: appliance doesn't respond or changes settings unexpectedly

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the control panel or console; keep fasteners organized
• Match terminal layout to the old switch and transfer any knobs or shrouds as needed

A replacement SN switch that restores the appliance's control function so selections and features respond reliably. Installs in the original switch location to return consistent on/off or selector operation after a switch failure. What it does:

• Opens and closes the electrical circuit to control the associated function or component.
• Replaces a worn or failed switch to stop intermittent operation or loss of control.
• Common symptoms it can fix: appliance not responding to a selector/setting, intermittent power to a component, or a component that won't turn on.
• Functions as the user-facing or internal control switch depending on the model application.

• Disconnect power (unplug appliance or shut off breaker) before starting any repair.
• May require removing an access or control panel; use basic hand tools and note wire locations before disconnecting.

Color: Black

This burner valve controls the flow of gas to a single surface burner, restoring proper burner ignition and heat control. It's a direct-replacement gas valve that helps fix intermittent or no-flame burner operation. What it does:

• Regulates gas flow to one surface burner so the burner lights and the flame responds to the control knob.
• Replaces a valve that is stuck, leaking, or not allowing gas through, which can cause a burner to fail to light or produce a weak/unsteady flame.
• Works with pilot/ignition systems to ensure consistent ignition when the knob is turned.
• Helps eliminate clicking or continuous sparking caused by failed gas delivery (when ignition sequence is otherwise OK).

• One burner valve

• Turn off the gas supply and unplug the appliance before starting any work.
• Verify valve orientation and connections match your appliance.
• Use approved fittings and check all gas connections for leaks with a soap solution or gas leak tester after installation.
• Do not attempt repairs if you smell gas; ventilate the area, avoid open flames.

This orifice spud is the small metal fitting that meters gas to a cooktop or range burner, restoring proper flame size and heat control. It fits into the burner manifold to direct fuel flow for safe operation. What it does:

• Regulates gas flow to a specific burner for correct flame height and heat output
• Helps restore even or full-strength flames when a burner is weak or uneven
• Can resolve ignition difficulty or burners that won't stay lit when caused by a worn or damaged spud
• Works as a direct replacement for the corresponding burner orifice in the manifold assembly

• One orifice spud

• Turn off the appliance's gas supply and electrical power before servicing
• Use appropriate wrenches and avoid overtightening to prevent damage to threads
• After installation, check all connections for gas leaks with a soap solution; do not use an open flame

A single pop rivet used to secure sheet-metal parts and small brackets on appliances for a permanent, vibration-resistant hold. Replaces missing or damaged rivets to restore proper attachment without welding. What it does:

• Provides a permanent blind-rivet fastening point for panels, brackets and trim.
• Replaces rivets that are sheared, loose or missing and prevents rattling or misalignment.
• Ideal where a solid, tamper-resistant join is required and screws aren't suitable.
• Works with a compatible pop-rivet tool for quick installation.

• Drill out the old rivet carefully; use the proper size hole for the replacement rivet.
• Use a dedicated pop-rivet tool and wear eye protection during installation.

This single valve switch is the electrical control that activates a single solenoid valve, restoring proper valve operation so the appliance can open or close the water/flow circuit as designed. It replaces a failed or non-responsive valve control switch. What it does

• Sends the electrical signal to a single solenoid valve so the valve opens or closes when commanded.
• Commonly used when a valve fails to energize, causing no water flow or intermittent operation.
• Helps resolve symptoms such as the valve not activating, intermittent dispensing, or an appliance that won't fill.
• Works as the user-commanded switch interface between control electronics and the valve assembly.

• One (1) single valve switch

• Disconnect power to the appliance before starting any repair to avoid shock.
• Turn off the water supply if the repair requires disconnecting water lines.
• Verify connector orientation and secure electrical connections; do not force connectors.

This spark switch controls the gas burner ignition circuit so the range/cooktop ignites when a burner control is turned. It replaces a worn or non-responsive ignition switch to restore reliable spark activation. What it does

• Routes the ignition spark signal when a burner knob is turned to light the burner
• Commonly used when a burner fails to produce a spark or ignition is intermittent
• Works with the cooktop/range ignition system to initiate burner lighting safely
• Replaces a faulty switch that clicks but does not generate spark control

• Disconnect electrical power (and gas supply if applicable) before beginning work
• Handle terminals and wiring carefully; note wire locations or take a photo before disconnecting
• Use proper tools and avoid damaging surrounding components or seals

The surface/top burner valve controls gas flow to a cooktop/range burner, letting you turn the flame on and adjust heat. Replacing a worn valve restores smooth knob feel and consistent ignition and flame control on your gas appliance.

• Regulates gas supply to the surface burner from Off to simmer to full flame
• A stiff or seized stem can make the knob hard to turn or stuck
• Failure can prevent the burner from lighting or cause erratic flame adjustment
• A stripped/broken shaft may let the knob spin without changing flame

• Disconnect power, shut off the gas supply, and allow the appliance to cool
• Remove the knob and access panel to reach the valve; label tubing and any wires for correct reassembly
• Transfer any orifice fittings and mounting hardware from the old valve as required; align the stem for proper knob orientation
• Use gas-rated sealant on pipe-threaded joints only and leak-test all connections with a non-corrosive solution before restoring service.

Color: Black

This orifice holder secures the gas orifice for a 17K burner, ensuring consistent fuel delivery for reliable burner operation. It replaces worn or damaged holders to restore proper gas flow and stable flames. What it does:

• Holds the burner orifice in the correct position for consistent gas flow to the burner
• Helps maintain an even, steady flame and predictable heat output
• Can address symptoms like weak or uneven flames or burners that fail to light reliably
• Works with the corresponding burner assembly to prevent orifice movement or leakage

• One orifice holder (17K) as shown

• Turn off gas supply and disconnect power before servicing the range
• Handle gas fittings carefully; confirm proper seating of the orifice in the holder
• If you smell gas, stop immediately
• Use manufacturer diagrams to verify fit

The front venturi is the front section of the burner venturi tube that mixes air with incoming gas for proper burner combustion. Replacing a damaged or clogged venturi helps restore reliable ignition and a steady flame. What it does:

• Directs and mixes air with gas before the burner to support stable, even flames.
• A worn, cracked, bent, or clogged venturi can cause weak flames, uneven heat, or difficulty lighting.
• Sits at the front portion of the burner venturi assembly and aligns gas flow into the burner head.
• Works with the rest of the burner components to maintain proper combustion characteristics.

• Turn off gas supply and unplug appliance before servicing; follow all local codes for gas work.
• Remove burner grates and burner head to access the venturi; handle carefully to avoid deforming the tube.
• Inspect surrounding burner parts and clean any debris before reassembly.
• After reinstalling, check for correct ignition and a steady flame; perform a leak check if gas lines were disturbed.

A replacement surface burner valve that controls gas flow to a cooktop burner for consistent flame and heat. Restores proper burner response so burners light and adjust as expected. What it does

• Regulates gas flow to a single surface burner so flame size responds to the control knob
• Helps resolve a burner that won't light or produces little or uneven flame
• Replaces a worn or faulty valve that causes inconsistent temperature during cooking
• Use with the corresponding manifold and control knob assembly for full operation

• One burner valve (surface)

• Turn off gas supply and disconnect power before servicing; follow all safety procedures
• Inspect connections and fittings for proper sealing; check for leaks after installation with a soap solution
• Handle components carefully to avoid damage to valve ports and threads

A genuine replacement mounting screw that secures appliance panels and components to restore proper fit and reduce vibration. Use this screw to replace missing or damaged fasteners for a secure, rattle-free repair. What it does:

• Fastens panels, brackets, or components to the appliance frame
• Restores proper alignment and reduces rattling or vibration
• Prevents parts from coming loose during operation
• Works wherever the OEM screw W10828565 is specified

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Install only where the OEM screw is specified; do not overtighten
• Replace any stripped or damaged screws with this exact part