Jgs07peh1ww Parts

The convection fan is an OEM component for Whirlpool ranges. It functions as the convection fan system, circulating hot air within the oven cavity to provide efficient all-around heating. 

The convection fan is responsible for proper air circulation and temperature distribution during convection bake and roast cycles. It allows for fast, even cooking on multiple racks simultaneously.

Symptoms of a bad convection fan include:

• Inefficient or uneven baking/cooking results  
• Longer than normal cook times
• Overheating or hot spots within the oven
• Strange noises coming from the convection fan area

Causes can include a failed motor, worn fan blades, or blockages that disrupt airflow.

This Whirlpool OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges.

This insert is a small OEM component designed to fit into a specific location on your appliance to secure, align, or finish an assembly. Replacing a worn, damaged, or missing insert restores proper fit and clean appearance.

• Provides a snug interface or cover within the designated assembly
• Helps prevent looseness, vibration, or gaps in the connected part
• Replaces cracked, worn, or missing insert pieces
• Common symptoms include loose or wobbly parts, misalignment, or a missing cap/cover

• Disconnect power and shut off gas/water before servicing
• Refer to your model's parts diagram to confirm location and orientation
• Use non-marring tools to avoid cosmetic damage
• Seat the insert fully; do not overtighten adjacent fasteners

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

Door hinge replacement that restores proper door alignment and smooth opening and closing for compatible appliances. Installs in place of a worn or damaged hinge to reduce door sag, improve sealing, and stop binding. What it does:

• Provides the pivot point that allows the door to open and close smoothly.
• Keeps the door aligned to maintain an even seal and prevent gaps that cause temperature loss.
• Replaces a bent, worn, or damaged hinge that can cause door sag, rubbing, or binding.
• Helps reduce noise or rough movement when opening or closing the door.

• Disconnect power (unplug or shut off the circuit) before beginning any repair.
• Support the door during removal and installation to prevent it from dropping or becoming damaged.
• Use appropriate hand tools and follow the appliance manufacturer's instructions; tighten fasteners securely but avoid overtightening.

This oven light gasket fits between the glass lens and the oven liner. It restores a proper seal around the light opening to help keep grease and moisture out of the light cavity and hold the lens securely in place. What it does:

• Seals the joint between the oven light lens and the cavity wall
• Helps prevent grease and moisture from entering the light assembly
• Keeps the lens snug to reduce looseness or rattling
• Replace if the gasket is cracked, flattened, brittle, missing, or if moisture/grease is visible around the lens

• One oven light lens gasket

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/retainer as your model requires (unscrew lens or release clips)
• Note gasket orientation and clean the mating surfaces
• Seat the new gasket evenly and reinstall the lens; do not overtighten the glass

The Convection Motor is an OEM part for GE gas ranges. It is the component responsible for circulating hot air around food inside the oven cavity during convection cooking cycles. 

Causes of a bad convection motor include failed windings, worn bearings, or damage from excess heat over time.

Symptoms of a bad convection motor include:

• Inability to select convection cooking functions 
• Lack of air movement inside the oven
• Slower than normal cooking times 
• Uneven baking or roasting results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement door hinge that restores proper door alignment and smooth opening and closing. Replaces worn or damaged hinges to help stop door sagging, binding, or poor sealing for safer, reliable operation. What it does:

• Provides the pivot and support that lets the appliance door open and close smoothly.
• Replaces a worn or broken hinge to correct door sag, binding, or uneven gaps.
• Restores proper door sealing and alignment to improve operation and reduce leaks or drafts.
• Matches the form and function of the original hinge.

• Unplug the appliance or disconnect power before starting any repair.
• Support the door while removing/installing the hinge to prevent dropping; have an assistant if needed.
• Use the appropriate hand tools; reuse original fasteners if replacement hardware is not provided.
• After installation, check alignment and operation; tighten fasteners securely but avoid over-torquing.

The Trim Vent is an OEM component specifically designed for Whirlpool ranges. Located at the rear of the unit above the oven cavity, the trim vent serves an important safety and ventilation purpose. 

Constructed of heat-resistant sheet metal with a powder-coated finish, the trim vent features an internal baffle system and a rear-mounted exhaust fan. This facilitates the proper drawing of hot oven air and fumes up and out of the kitchen area. 

This exhaust vent meets all codes regarding flame barrier rating and venting performance. It attaches securely to the framework at the top and back edges. 

Symptoms of a bad trim-vent include:

• Excessive heat and smoke escaping during use  
• Grease or residue buildup inside the vent pathway
• Misaligned vent body not flush or securely seated 

This OEM part fits KitchenAid, Jenn-Air, Amana and select GE range models.

This oven rack replaces a worn, bent or missing shelf inside the oven cavity so cookware sits level and slides in and out smoothly. It restores proper support for baking sheets, pans and cookware for even cooking results. What it does:

• Provides a sturdy shelf for bakeware, pans and roasting cookware
• Keeps cookware level to promote even browning and consistent results
• Replaces warped, bent or damaged racks that won't slide or stay in position
• Helps prevent cookware from tipping or sliding during use

• Install by sliding rack into the desired oven track; no tools typically required
• Allow the oven to cool completely and disconnect power before handling
• Inspect oven track rollers and guides for damage; replace those parts separately if needed
• Handle with care to avoid pinching; racks may have sharp edges

The Grate-Kit is an OEM component specifically designed for Whirlpool electric ranges. It includes the cooking grates and necessary mounting hardware to outfit one or more oven racks. 

Symptoms of worn or damaged grates include: 

• Uneven cooking from hot and cold spots on the grates  
• Foods sticking or burning more easily due to surface deterioration
• Warping, cracking, or breakage of grate wires from high-heat use
• Loose or missing fasteners cause unsafe support of cookware

Causes can be accumulated years of cooking on the grates. Exposure to high temperatures, grease splatters, and occasional mishandling also contribute to normal wear over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This vent trim is the exterior trim piece that finishes and protects the appliance vent opening, restoring a clean appearance and helping direct airflow. It replaces a cracked, dented or missing vent surround. What it does:

• Covers the vent opening and hides raw edges for a finished look
• Helps channel exhaust airflow and stabilize the vent opening
• Prevents debris and large particles from entering the vent gap
• Stops rattling or movement caused by a loose or damaged trim
• Restores proper fit and alignment of the vent surround

• One vent trim piece

• Disconnect power to the appliance before starting any work
• Remove the old trim by loosening retaining screws or clips, then position the new trim and secure with the original fasteners
• Use basic hand tools; avoid overtightening screws to prevent cracking
• If metal edges are sharp, wear gloves and work carefully

This stainless-steel trim assembly restores the finished look and protective edge of the appliance fascia. It replaces a damaged, dented, or missing trim piece to help seal and finish the control/vent opening. What it does

• Replaces worn, dented, or scratched trim to restore appliance appearance
• Covers and protects the edge of the fascia or opening from dirt and damage
• Helps keep the control/vent area sealed and neat-looking
• Stops rattles or gaps caused by a loose or missing trim piece

• One stainless-steel trim assembly

• Disconnect power to the appliance before starting any work
• Basic hand tools typically required; remove adjacent panels or fasteners to access the trim
• Handle stainless trim carefully to avoid scratches; use a soft cloth when positioning

This surface burner head replaces a damaged or worn gas range burner element to restore proper flame pattern and even cooking. It fits into the cooktop assembly and directs gas to the burner ports for consistent heat. What it does:

• Directs and shapes the burner flame for even heating across pots and pans
• Replaces warped, cracked, or clogged burner heads that cause uneven or weak flames
• Helps correct symptoms like sizzling, yellow-tipped flames, sputtering, or burners that light poorly
• Works with the burner cap and base to restore proper ignition and flame stability

• Turn off the appliance and allow all components to cool before servicing; shut off gas supply or disconnect gas/electric per your appliance manual
• Remove grates and burner caps, lift out the old burner head, and seat the new head flat on the burner base; avoid forcing or bending components
• Inspect surrounding parts (cap, igniter, burner base) for damage or buildup and clean as needed to ensure proper function

This oven rack provides a stable, adjustable shelf inside the oven so cookware sits securely for baking, broiling, and roasting. It restores proper oven organization and consistent airflow for even cooking. What it does:

• Supports cookware and bakeware at selectable oven heights for versatile cooking
• Replaces warped, bent, rusted, or missing racks that can cause instability
• Helps maintain proper clearance and airflow for even baking and roasting
• Slides into oven rack guides for easy repositioning as needed

• One oven rack

• Install by sliding the rack into the oven side rails until fully seated; no tools usually required
• Ensure the oven is completely cool and disconnected from power before handling
• Clean with warm, soapy water; avoid abrasive cleaners that can damage finishes
• Verify correct rack placement and secure fit before preheating the oven

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage