Jnm3163 Parts

This is the high-voltage magnetron for a microwave oven. It generates the microwave energy that heats food; replacing a weak or failed magnetron can restore normal cooking performance and resolve "runs but no heat" complaints.

• Generates the RF energy that cooks and heats inside the microwave cavity
• Common fix when the microwave runs but does not heat
• Symptoms can include unusually loud humming/buzzing during operation
• Helps with intermittent heating or a burnt odor from a failing tube

• Disconnect power and safely discharge the high-voltage capacitor before servicing
• Note wire locations; transfer any shielding, brackets, or insulators from the original as required
• Mount securely and ensure correct orientation for proper cooling airflow
• After reassembly, test heating with a cup of water

The Control Panel Asm is an OEM replacement part for GE microwaves. It houses the electronic components and interfaces that allow users to operate the microwave functions.

Causes of a bad control panel assembly include damage from moisture damage, impact or drop damage over time, or failures in the electronic components' circuitry. 

Symptoms of a bad control panel include:

• Failure to illuminate or light up when buttons are pressed
• Inability to set power levels or time functions  
• Unresponsive or non-functioning buttons
• Display not working or flickering 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Installation Hardware Kit is an OEM part for GE over-the-range microwaves. It contains brackets and fasteners used to securely mount the microwave above the range cooking surface.

Symptoms requiring an installation hardware replacement include:

• Missing or damaged anti-tip brackets  
• Loose mounting screws or damaged mounting plates
• Inability to properly position and affix the microwave

Causes can be stripped mounts from over-tightening old hardware or components lost during a previous removal. Normal wear over extended use may also degrade hardware.

This genuine GE kit is compatible with some Profile and GE Profile series models as well.

This AC synchronous motor powers the microwave's rotating mechanism—such as the mode stirrer or, on some models, the turntable—to circulate energy for more even cooking. Replacing a noisy, seized, or non-turning motor restores smooth rotation and consistent heating.

• Provides steady, low-speed rotation to drive the internal stirrer or turntable
• Promotes more uniform heating by distributing microwave energy
• Common symptoms of a failing motor: uneven heating, rattling/grinding from the cabinet, or the rotating component not turning
• Direct replacement for the original synchronous drive motor

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a charge
• Access and location vary by model; remove the outer cover/grille to reach the motor
• Note shaft orientation and transfer any coupler; reuse existing mounting hardware
• Do not operate the unit with covers removed; after reassembly, test with a microwave-safe cup of water

This charcoal filter captures odors and fine particles from the air as it recirculates through the microwave, helping keep your kitchen fresher and reducing buildup inside the unit.

• Adsorbs cooking odors when the microwave is set up for recirculating operation
• Helps maintain airflow by trapping grease and fine particulates
• Replace when saturated or damaged; common signs include lingering odors, reduced capture of smoke/steam, or a visibly dirty filter
• Regular replacement supports effective ventilation and protects internal components

• Disconnect power before servicing
• Access panel/grease filter removal may be required to reach the charcoal filter
• Note airflow orientation and seat the new filter securely
• Do not wash; replace at recommended intervals for best performance

The Fuse is an OEM part for GE microwaves. It serves as a safety device that protects the microwave by breaking the circuit if there is a power surge or electrical fault. This helps prevent damage to the microwave's components and ensures safe operation.

You should replace the fuse if it becomes blown or damaged. Causes of a bad fuse can include power surges, electrical faults, or issues within the microwave such as overheating. These factors can cause the fuse to blow, rendering the microwave inoperable.

Symptoms of a bad fuse include:

• The microwave not turning on or suddenly losing power
• No response from the microwave’s control panel
• The microwave stopping mid-cycle without completing the cooking process

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Magnetron with thermal fuse.

This manufacturer-supplied OTR hardware bag contains the mounting and fastener pieces used to secure an over-the-range microwave during installation or reinstallation, helping restore proper attachment and stability. What it does

• Provides the manufacturer-specified mounting hardware used to fasten an over-the-range unit to the cabinet and wall.
• Replaces missing or damaged fasteners that can prevent secure installation.
• Helps correct issues like a loose, rattling, or improperly seated OTR microwave.
• Intended to be used with the appliance's original mounting points and installation instructions.

• Follow the appliance manufacturer's installation instructions exactly; hardware must match the installation procedure for your model.
• Disconnect power before working on the appliance and ensure the unit is supported during installation.
• Use appropriate tools and, when lifting or positioning the microwave, have a second person assist to avoid injury or damage.

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This cooktop lamp socket is the replacement holder that secures the cooktop bulb and provides the electrical connection so interior or surface lights work reliably. Restores proper bulb seating and electrical contact for safe lighting. What it does:

• Holds the cooktop light bulb in place and provides the electrical connection to power the lamp
• Re-establishes a secure contact if the original socket is loose, burned, or cracked
• Helps resolve symptoms like a bulb that flickers, won't stay lit, or fails to power on
• Compatible with standard cooktop light bulbs used in many GE cooktops

• One cooktop lamp socket

• Disconnect power to the appliance before servicing to avoid electric shock
• Inspect wiring and terminals for damage; replace any frayed or heat-damaged wires
• Securely seat the bulb and test operation before reassembling the cooktop

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This is the front control panel where you interact with the appliance. It replaces a cracked or worn panel so the display window and controls are properly supported, aligned, and easy to read.

• Houses and protects the display and user controls; provides the labeled interface surface
• Restores fit and appearance if the original panel is cracked, warped, or damaged
• Helps address loose/misaligned controls or gaps caused by broken mounting tabs
• Finish/style: black panel configured for units with white LED indicators

• Disconnect power at the breaker before servicing
• Remove knobs/buttons and perimeter screws; lift off the old panel carefully
• Transfer any brackets, clips, or trim from the original panel as required by your model
• Align the new panel and reinstall hardware; do not overtighten screws

The white handle Assembly is an OEM part for GE built-in microwave oven models. It securely holds the door in place duraing cooking operations.  

Causes of failure include corrosion of metal mounting brackets from steam exposures over time, impact damages compromising structural integrity, as well as wear on plastic contact points reducing a secure closure.

Symptoms of a faulty handle assembly include:

• Loose door vulnerable to accidental opening during a cycle 
• Risk of steam burns if seal effectiveness is reduced
• Degraded aesthetic cohesion with surrounding cabinetry

This OEM handle assembly fits Hotpoint and RCA built-in microwaves.

This control panel bracket supports and secures the user interface assembly to the appliance frame. Replacing a damaged bracket restores a solid, correctly aligned panel so buttons and display sit properly without flex, gaps, or rattles.

• Provides the structural mount for the control panel assembly
• Maintains proper alignment of keypad/display and surrounding trim
• Helps correct a loose, wobbly, or misaligned control panel
• Replaces brackets that are cracked, bent, or stripped at mounting points
• Reduces vibration or rattling noises from the panel area

• Disconnect power at the breaker or unplug before servicing; if working on a microwave, high-voltage components can retain a charge.
• Support the control panel when removing fasteners to avoid straining wire harnesses.
• Transfer any reusable clips, insulation, or screws from the original bracket.
• Avoid pinching harnesses.

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover