Jvm1540smsss Parts

A replacement auxiliary burner holder for gas/electric cooktops that secures the small heating element or burner cap for stable, even cooking. Restores proper support and alignment for auxiliary burners. What it does:

• Holds and centers the auxiliary burner or element cap on the cooktop for reliable heat contact
• Helps prevent burner wobble, misalignment, and uneven heating
• Supports safe, consistent pan placement on the auxiliary cooking zone
• Fits into the cooktop assembly where the auxiliary burner is mounted

• One auxiliary burner holder (1 count)

• Basic part; remove burner cap/element and replace holder per appliance disassembly steps
• Turn off power and/or gas and disconnect the appliance before beginning work
• Handle porcelain-coated parts carefully to avoid chipping; avoid overtightening fasteners

The Door Handle is an OEM part for GE microwaves. It is located on the exterior of the microwave door and is black in color. It allows you to securely open and close the door during use.

Causes of a faulty door handle can include regular wear and tear, physical damage, or improper handling. These factors can result in issues such as difficulty in opening or closing the microwave door, a loose or unstable handle, or complete failure of the handle.

Symptoms of a bad door handle may include:

• Difficulty in opening or closing the microwave door
• A loose or wobbly handle
• Visible damage or signs of wear on the handle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Primary Interlock and Door Switch is an OEM replacement part for GE microwaves. It plays a significant role in the safety and operational efficiency of the appliance. This component ensures that the microwave does not operate when the door is open, preventing exposure to microwaves.

Causes of a bad Primary Interlock and Door Switch can include mechanical wear, damage due to forceful closing or opening of the microwave door, or electrical issues that affect the switch's functionality. A malfunctioning switch can lead to the microwave operating with the door open or not starting at all.

Symptoms of a malfunctioning Primary Interlock and Door Switch include:

• The microwave operating when the door is open
• The appliance not starting or heating
• Unusual sounds during the door operation
• Error codes indicating door or switch issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts

This monitor interlock switch is the safety door switch used in many microwaves. It detects the door latch position and helps cut power if the interlock circuit faults, restoring reliable, consistent start/stop operation. What it does:

• Senses the door latch position within the interlock assembly
• Opens the monitor safety circuit if the primary door switch sticks or fails
• Common fixes for: microwave won't start; no heat with lights/fan working; intermittent operation when moving/closing the door; blown fuse when the door is opened or closed
• Helps ensure heating only occurs with the door fully closed

• One monitor interlock microswitch

• Disconnect power and discharge the microwave's high-voltage capacitor before servicing
• Access via the control panel/interlock area; note actuator orientation and terminal positions; transfer wires one at a time
• Install in the correct interlock location (monitor) and check switch continuity with a multimeter before reassembly and testing

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This thermal fuse is a single-use overheat cutoff that interrupts power when temperatures exceed safe limits, helping protect the appliance from overheating and preventing further component damage. What it does:

• Opens the electrical circuit when excessive heat is detected to stop operation and reduce fire risk
• Commonly used in heating and cooling appliance circuits where temperature protection is required
• Helps isolate failed heating components by cutting power if a thermostat or heater malfunctions
• Serves as a safety device — once tripped it must be replaced to restore normal operation

• One thermal fuse

• Disconnect power to the appliance before attempting any service
• Replace only with the exact part number shown; do not bypass or jumper the fuse
• Install in the same orientation and mounting location as the original
• If the new fuse trips immediately, stop and diagnose the appliance to find the underlying fault

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

This control panel is the user interface assembly that houses the touchpads/buttons and display used to operate the range/oven. Replacing a damaged or unresponsive panel restores normal control and visible cycle feedback. What it does:

• Provides the buttons/touchpads and display needed to select bake, broil, timers, and other oven functions
• Relays user commands to the oven's main control so cycles start and stop as expected
• Restores visible status/error indicators when the original panel is cracked, faded, or nonresponsive
• Helps resolve common symptoms like unresponsive buttons, missing display segments, or erratic control behavior

• One control panel (user interface assembly)

• Disconnect power at the breaker before beginning any work to avoid shock or injury
• Handle the panel and any attached ribbon/cable with care to avoid damaging fragile connectors or the display
• Basic hand tools are typically needed to remove trim and fasteners; reattach connectors securely before restoring power

This handle assembly replaces a damaged or worn appliance door handle, restoring a secure grip and normal door operation. Durable replacement designed to match the original fit and finish for an easy refresh. What it does:

• Provides a solid, ergonomically shaped grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that make the door hard to operate
• Helps restore proper door alignment and sealing when handle damage interferes with use
• Matches original mounting points for a direct replacement

• Disconnect power to the appliance before starting any repair
• Keep track of mounting screws and hardware during removal and installation
• Use basic hand tools (screwdriver, nut driver) and avoid over-tightening fasteners