Jvm1572 Parts

This optional charcoal replacement filter helps reduce lingering food odors and improves interior air freshness in compatible refrigerators. Easy to swap in refrigerators that use an activated carbon air filtration cartridge. What it does:

• Adsorbs and helps reduce common refrigerator odors for a fresher-smelling interior
• Restores air freshness when stale or musty smells develop
• Works with refrigerators equipped with an activated carbon air filter system
• Serves as a direct replacement cartridge when the original filter is worn or saturated

• Remove packaging and slide or snap the new cartridge into the filter housing; secure per the manufacturer's instructions.
• Do not wash or soak the charcoal cartridge—replace when performance declines.
• Dispose of the used filter cartridge according to local regulations.

This thermal fuse is a single-use overheat cutoff that interrupts power when temperatures exceed safe limits, helping protect the appliance from overheating and preventing further component damage. What it does:

• Opens the electrical circuit when excessive heat is detected to stop operation and reduce fire risk
• Commonly used in heating and cooling appliance circuits where temperature protection is required
• Helps isolate failed heating components by cutting power if a thermostat or heater malfunctions
• Serves as a safety device — once tripped it must be replaced to restore normal operation

• One thermal fuse

• Disconnect power to the appliance before attempting any service
• Replace only with the exact part number shown; do not bypass or jumper the fuse
• Install in the same orientation and mounting location as the original
• If the new fuse trips immediately, stop and diagnose the appliance to find the underlying fault

This noise filter helps reduce electrical interference on the appliance power line, protecting control electronics and improving operational stability. Replacing a faulty filter can reduce intermittent controls, audible buzzing, or interference with nearby electronics. What it does:

• Suppresses electrical noise on the incoming power line to help protect control boards and communications modules.
• Helps prevent symptoms such as intermittent operation, unexplained control resets, audible humming/buzzing, or radio/TV interference near the appliance.
• Installs in the appliance power circuit to filter line noise and reduce stray interference that can affect sensitive electronics.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Ensure secure wiring and a proper ground connection when installing the replacement filter.
• Handle the part carefully and avoid touching electronic contacts.
• Follow OEM instructions for placement and mounting.

This magnetron generates microwave energy to heat food in compatible countertop and over-the-range microwaves. Replacing a worn magnetron restores cooking power and helps eliminate uneven heating or failure to heat. What it does:

• Converts high-voltage electrical power into microwave radiation used to cook and reheat food
• Common symptom: oven runs but food doesn't heat or heats very slowly
• May also be needed if you notice loud buzzing, arcing, or burning odors during operation
• Works with the microwave's high-voltage system; other components may also need inspection

• One magnetron (single unit as shown)

• Disconnect power and discharge the microwave's high-voltage capacitor before servicing
• Inspect surrounding parts (waveguide, diode, capacitor, and cooling fan) for damage during replacement
• Use only the correct replacement part number to ensure proper fit and safe operation

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This noise filter assembly is a direct-replacement line filter that helps reduce electrical interference and appliance noise for compatible GE appliances. It restores cleaner power to control boards and can help stop buzzing or interference-related behavior. What it does:

• Suppresses incoming electrical noise and RF interference on the power line
• Helps prevent control glitches and erratic behavior caused by voltage transients
• Can reduce humming, buzzing, or audio/EMI interference from the appliance
• Supports stable operation of electronic controls and sensors

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle wiring and connectors carefully; match wires/terminals exactly on reassembly
• Secure the filter in its mounting location and ensure wiring is routed clear of moving parts

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.

This is a truss-head self-tapping screw used to secure appliance panels and trim. It replaces a lost or damaged mounting screw to restore proper fit and stop rattles or loose parts. What it does

• Secures trim, panels, brackets or small components where a low-profile, wide-head screw is required
• Self-tapping design cuts threads into sheet metal or similar substrates—no nut required
• Restores tight mounting to reduce vibration, rattling or misaligned panels
• Commonly used in refrigerators, ranges and other household appliances

• One truss-head self-tapping screw

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten—turn until snug and the part is secure but not distorted
• Replace with the exact part number to ensure fit and function

This thermostat regulates oven temperature to help maintain consistent cooking results and prevent under- or over-heating. It replaces a failed temperature control component to restore accurate oven cycles. What it does:

• Senses oven temperature and signals the control to cycle the heating element or burner
• Helps correct symptoms like oven not reaching set temperature or running too hot/too cold
• Works with the oven's control system to maintain stable cooking temperatures
• Functions as the temperature-sensing switch for bake/oven operation

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the thermostat and sensing bulb carefully; avoid kinking or damaging the capillary tube if present
• Mount and secure per the OEM layout; confirm correct orientation and probe placement for accurate sensing

This lamp drawing is the appliance lighting assembly that provides interior illumination for safe visibility and operation. It restores proper lighting so you can check contents and settings without opening the appliance in the dark. What it does

• Houses and positions the interior lamp to produce even light where needed.
• Connects to the appliance wiring to deliver power to the lamp.
• Commonly replaces assemblies that are cracked, broken, loose, or no longer illuminating.
• Resolve symptoms such as dim, flickering, or non-working interior lights.

• One lamp drawing lighting assembly.

• Always disconnect power (unplug or shut off breaker) before accessing electrical components.
• Handle lamp sockets and wiring gently to avoid damage; replace bulbs per manufacturer specifications.
• Verify fit and connector type before installation.

This tapping pan-head screw secures interior panels and components in appliances, providing a low-profile head and threads that form into metal for a firm hold. It's a direct-fit fastener for repairs and replacements. What it does

• Fastens panels, brackets and small appliance components where a self-tapping screw is required
• Pan-head profile gives a flush, low-profile finish that resists snagging
• Threads cut into mating metal to create a secure attachment without a nut
• Commonly used where sheet-metal or thin-frame fastening is needed

• One tapping pan-head screw

• Use the correct screwdriver bit that matches the screw recess to avoid stripping
• Start in a pilot hole or with light initial pressure to ensure proper thread formation
• Tighten until snug; do not over-torque — overtightening can strip threads or deform panels
• Wear eye protection when working with metal fasteners and sheet metal