Jvm316 Parts

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This white refrigerator door assembly replaces a damaged or worn exterior door to restore proper closure and appliance appearance. It provides a factory-style fit and finish for models that use this specific door assembly. What it does:

• Replaces a cracked, dented, or cosmetically damaged refrigerator door to improve appearance
• Restores proper door closure and helps maintain internal temperature by allowing the seal to seat correctly
• Replaces a missing or bent door shell that interferes with normal operation
• Matches factory finish and mounting points for a direct-fit replacement when the OEM door is required

• Disconnect power to the appliance and remove food from the door before starting
• Installation may require removal of trim, hinges, and interior shelves; keep fasteners for reuse
• Use appropriate hand tools and follow the manufacturer's service instructions for alignment and sealing
• If electrical components or wiring are present, test operation before returning the appliance to service

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

The door assembly is an OEM part for GE microwaves. It is responsible for sealing the microwave interior and providing a secure close and protection against radiation generated during cooking. It is designed to withstand the heat and pressures generated inside the microwave, providing a reliable barrier between the cooking space and the external environment.

A bad door assembly can lead to issues such as a loose or ineffective seal, difficulty in opening or closing the door. Causes of a bad assembly can include wear and tear over time, damage to the door components, or improper handling.

Symptoms of a bad door assembly include:

• A loose or misaligned door that doesn't close properly
• Difficulty in opening or closing the door smoothly
• Visible cracks or damage to the door assembly

Replace your worn-out or damaged door assembly with this genuine OEM GE part to ensure the safe and efficient operation of your microwave. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This cover choke is a small protective cap used on compatible ranges to cover and protect the choke assembly. It prevents debris and spills from reaching the choke area so burners operate more reliably. What it does:

• Protects the choke assembly from food, grease and spills that can interfere with burner performance
• Helps maintain proper airflow around the choke for consistent ignition and flame control
• Reduces the risk of clogging or contamination that can cause weak or uneven burners
• Simple replacement can resolve symptoms like noisy or erratic burner operation when caused by debris

• One cover choke

• Turn off power and gas supply to the appliance before servicing; follow manufacturer's safety guidance
• Remove grates and burner components as needed to access the choke area; handle small parts carefully
• Inspect adjacent gaskets and burner parts for damage and clean surrounding areas before installing the new cover

A replacement oven lamp cover that protects and diffuses the interior light so you can see food clearly while preventing direct contact with the bulb. Fits behind the oven lamp housing to restore safe, even illumination. What it does:

• Protects the oven light bulb from food splatter, heat, and accidental contact
• Diffuses and softens the lamp output for clearer, less-glare interior visibility
• Replaces cracked, cloudy, or missing lens that can reduce oven illumination
• Helps maintain proper lamp alignment and housing coverage during use

• One lamp cover

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven and bulb to cool completely before removing the old cover
• Access may require removing oven racks and/or a few screws or clips from the lamp housing
• Handle the cover carefully—glass/plastic lenses can chip or crack; tighten fasteners snugly but do not overtighten

This capacitor helps the appliance motor start and run smoothly, restoring proper motor operation and reducing startup strain. Use this exact replacement to address motor performance issues. What it does:

• Provides the electrical phase shift needed for the motor to start and run
• Restores normal motor startup and running behavior
• Can resolve humming, slow or non-starting motors, and intermittent motor stalls
• Works with the motor's control circuitry to stabilize performance under load

• Always disconnect power to the appliance before starting work
• Discharge the capacitor before handling to avoid electrical shock
• Match terminals and wiring exactly to the original; secure connections firmly

This outer oven door panel restores the exterior appearance and protective surface of your oven's front. It replaces a scratched, dented, or faded outer door and brings back the original slate finish. What it does

• Replaces damaged or cosmetically worn outer door surface to improve appliance appearance
• Provides the external protective panel that covers internal door components
• Helps the door sit correctly with existing inner panels and hardware when installed properly
• Appropriate for restoring a uniform slate finish after impact or wear

• Disconnect power to the oven before beginning any repair to avoid shock or injury
• Door removal typically requires supporting the door, removing hinge screws, and separating inner panels—follow OEM instructions
• Handle the panel carefully by the edges to avoid scratches or bending

This control panel assembly replaces a damaged or unresponsive user interface so you can reliably select settings and operate the appliance. It restores a clean, factory fit when the original panel becomes cracked, sticky, or worn.

• Provides the front user interface housing and keypad/touchpad area
• Sends key-press signals to the control system via the ribbon connector
• Replaces broken, faded, or physically damaged panels
• Helps resolve unresponsive or intermittent keys, stuck buttons, or keypad-related error beeps/codes

• Disconnect power at the breaker before servicing
• On microwave models, internal high-voltage components can retain a charge even when unplugged—use extreme caution
• Support the panel while removing screws; don't stress the wiring or ribbon cable
• If applicable, transfer any reusable boards, clips, or light pipes from the old panel; seat the ribbon connector straight and fully

This control panel replaces a damaged or worn front panel and restores the oven's user controls and display visibility. It provides the finished slate appearance and white LED illumination for clear button and readout visibility. What it does:

• Houses the oven control buttons and LED display so you can select functions and monitor settings.
• Restores visible white LED indicators and backlighting for easier reading in low light.
• Replaces cracked, scratched, or discolored front panel surfaces that interfere with operation.
• Helps resolve unresponsive or hard-to-read control areas when the original panel is physically damaged.

• One slate control panel with white LED as shown.

• High-level replacement; basic hand tools required and panel mounts with screws and clips.
• Disconnect power at the breaker or unplug the range before starting to avoid shock.
• Handle LEDs and circuit areas carefully; avoid contact with wiring and circuit board surfaces.

The Microwave Power Cord Assembly is an OEM part for GE ranges featuring built-in microwave units. 

Causes of failure can be splitting insulation from flexing at plug points, bent pins compromising contacts, or degradation over extended use.

Symptoms of a faulty power cord include: 

• Intermittent or failing microwave operation
• Loose connection points presenting shock hazards
• Exposed internal wiring posing fire risks

This OEM part is also compatible with Hotpoint and RCA built-in microwave range models.

This wire harness replaces a damaged or worn internal wiring assembly to restore secure electrical connections between controls and components. It helps prevent intermittent operation and reduces risk of shorts caused by frayed or broken wires. What it does

• Routes and connects power and signal circuits between control, switches, and components
• Replaces cracked, burnt, or broken wires that cause intermittent or no operation
• Helps stop electrical arcing, visible sparks, or blown fuses related to harness faults
• Restores reliable connector fit where pins or terminals have loosened or corroded

• One complete wire harness as pictured

• Always disconnect power (unplug or turn off breaker) before inspecting or replacing wiring
• Compare the new harness to the old one to ensure connector types and lengths before installing
• Route harness away from moving parts and heat sources; secure with existing clips or ties
• If terminals are damaged or connectors don't seat fully, replace connectors.

This control panel assembly replaces the front console that houses the user controls and display for the range/oven. Restores responsive buttons and clear status readouts so you can select oven modes, set temperatures and timers. What it does:

• Replaces the main console that holds touchpads/buttons and the display for oven/range functions
• Restores proper input response when setting bake, broil, timers and clock
• Helps eliminate unresponsive keys, missing display segments or intermittent control behavior
• Works with the appliance's existing wiring harness and mounting points

• Disconnect power at the breaker before starting; electric shock hazard.
• Handle the display and ribbon/connectors carefully to avoid damage; use proper tools.
• Reconnect wiring exactly as removed; secure mounting screws to prevent vibration.

This stainless steel door assembly replaces a damaged or worn outer door to restore appearance and proper closing on compatible GE appliances. It provides the finished exterior panel and mounting points needed for a like-for-like replacement. What it does:

• Replaces a dented, bent, cracked or cosmetically damaged outer door panel
• Restores proper door fit and alignment to help the appliance close securely
• Replaces a door with scratched or corroded stainless finish for improved appearance
• Works with existing hinges, latch components, and trim when they are undamaged

• Disconnect power to the appliance before starting any door repair or removal
• Handle edges and any glass elements carefully to avoid cuts or breakage
• Some trimming or adjustment of hinges/fasteners may be required for proper alignment

This slate control panel replaces a damaged or worn front panel on compatible GE ranges to restore the appliance's appearance and provide a clean surface for the oven controls and display. Designed to match slate finishes. What it does

• Serves as the front fascia for the range's control area and display, protecting underlying electronics and components.
• Provides a finished mounting surface for touchpads, buttons, and indicator windows.
• Addresses cosmetic issues like scratches, chips or faded finish to improve the appliance's look.
• Useful when the original panel is cracked, bent, or otherwise preventing proper sealing of the control area.

• One slate control panel

• Disconnect power to the appliance before starting any service to avoid electrical shock.
• Basic hand tools typically required; some models may require removal of the cooktop or rear access panel.
• Handle edges and any glass components with care to avoid cuts or breakage.