Jvm316od4cc Parts

This replacement microwave door handle restores a solid, comfortable grip for opening and closing the door. Replace a cracked, loose, or missing handle to improve safety, usability, and appearance. What it does:

• Provides a sturdy handhold to operate the microwave door
• Replaces a broken, cracked, or wobbly handle
• Helps restore normal door function and appearance
• Typical symptoms: loose handle, difficulty opening the door, visible cracks

• 1 door handle

• Disconnect power at the breaker or unplug the microwave before servicing
• Access the handle fasteners from inside the door; carefully remove the inner door trim to reach them
• Support the door and keep track of all screws and spacers during removal
• Tighten mounting screws evenly and test door opening/closing and latching before restoring power

The Door Handle Mounting Bracket is an OEM part for GE microwaves. This bracket is essential for securely attaching the door handle to the microwave door, ensuring that the handle remains stable and functional during use. 

You should replace the door handle mounting bracket if it becomes damaged or fails to hold the handle securely. Causes of a bad mounting bracket can include regular wear and tear from frequent use, accidental impacts or forceful handling, and material fatigue over time.

Symptoms of a bad door handle mounting bracket include:

• The handle feeling loose or wobbly
• Difficulty opening or closing the microwave door
• Visible cracks or damage to the bracket
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This turntable support ring sits beneath the microwave's glass tray and rides on small rollers to enable smooth rotation. Replacing a worn ring restores stable, quiet turning for more consistent heating and helps prevent tray wobble.

• Supports the glass tray and allows it to rotate smoothly
• Helps maintain even heating by keeping the tray centered and turning
• Common symptoms: tray not turning or stopping intermittently; tray wobbling or slipping
• Reduces grinding or squeaking caused by a worn ring

• Disconnect power by unplugging the unit or switching off the circuit breaker
• Remove the glass tray; lift out the old ring and clean the track
• Position the new ring with the rollers facing up and seated evenly
• Reinstall the glass tray and verify free rotation before restoring power

The control panel assembly is an OEM part for GE microwaves. It is responsible for housing the control buttons and display, allowing you to operate and monitor your microwave's settings. It is built to withstand the demands of daily use, providing a reliable interface for adjusting cooking times, power levels, and other settings.

A bad control panel assembly can lead to issues such as unresponsive buttons, a malfunctioning display, or difficulty in operating the microwave. Causes of a bad assembly can include wear and tear over time, damage to the control panel components, or electrical malfunctions.

Symptoms of a bad control panel assembly include:

• Unresponsive buttons or a non-functioning control panel
• Flickering or dim display
• Error messages or incorrect readings on the display
• Inability to adjust or change settings

Replace your worn-out or damaged control panel assembly with this genuine OEM GE part to restore the full functionality and user-friendly operation of your microwave.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This vent grille covers the upper front opening of the microwave and channels exhaust air through the louvered slots. Replace a cracked, loose, or missing grille to maintain proper ventilation and restore the unit's finished appearance.

• Directs exhaust airflow while allowing adequate ventilation
• Shields internal components at the upper front of the microwave
• Provides a clean, finished look when secured in place
• Typical symptoms: broken or missing louvers, loose fit, rattling noise, grille won't stay secured

• Disconnect power to the microwave before servicing
• Remove and retain mounting screws; support the grille as the last fastener is removed
• Transfer any reusable clips or nameplate from the old grille if present
• Align the new grille and start screws by hand; tighten gently to avoid cracking

The Installation Hardware kit is an OEM part for GE Built-In and Over-the-Range microwaves. It contains all mounting screws and brackets needed for installation into upper kitchen cabinetry. 

Symptoms of faulty or inadequate hardware include:

• Loosening or failure of the microwave mounting over time
• Difficulty leveling or properly securing the appliance
• Warping or damage to cabinet surfaces from faulty bracketry

Causes can be stripped screw holes, worn brackets, or omitted/lost original hardware disrupting a snug fit. Replacing with this hardware ensures safe support of weighty microwaves above cooktops.

Compatible with GE Profile, Hotpoint, and some Kenmore units, it facilitates installation or re-installation without frustration. 
 

Restore a secure, comfortable grip for opening and closing the door. This replacement handle brings back safe, easy operation and a clean, factory look when the original handle is cracked, loose, or missing. What it does:

• Provides a sturdy handhold to open and close the door
• Replaces a broken, cracked, or missing handle
• Helps maintain safe, consistent door operation
• Common symptoms: loose or wobbly handle, visible cracking, handle pulled off, cosmetic damage

• 1 door handle

• Disconnect power to the appliance before starting.
• Open the door and support the outer panel while removing interior screws that secure the handle.
• Reuse original mounting hardware; tighten screws evenly without overtightening.
• Verify the door opens, closes, and latches properly before returning to service.

The Grille Vent is an OEM part for GE microwaves. It is designed to cover the vent openings, allowing proper airflow while protecting the internal components of the microwave. The grille vent helps maintain optimal ventilation, ensuring that the microwave operates efficiently by preventing overheating.

You should replace the grille vent if it becomes damaged or clogged. Causes of a bad grille vent can include the accumulation of dust and debris, physical damage from impacts, or wear and tear over time. A compromised grille vent can lead to poor ventilation, affecting the microwave's performance and potentially causing overheating.

Symptoms of a bad grille vent include:

• Reduced airflow or ventilation
• The microwave overheating or shutting down during use
• Visible damage, such as cracks or broken slats
• Accumulation of dust and debris in the vent area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch Board is an OEM part for GE microwaves. The latch board controls the door latching mechanism that secures the microwave door closed during operation. It works alongside the door interlock switch to initiate the removal of power to the magnetron when the door is opened, for safety during use. 

Symptoms of a bad latch board include: 

• The door not closing and latching properly  
• The microwave operating with the door open
• Error codes or blinking lights related to the door interlock system
• Issues engaging or disengaging the door-locking mechanism

This replacement part is also compatible with Hotpoint and Profile microwaves. 

This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.

• Detects door open/closed status to enable or disable cooking
• Part of the safety interlock system that stops operation if the door opens mid-cycle
• Replace if the switch fails a continuity check or shows heat or terminal damage

• Disconnect power before service; microwave capacitors can retain a dangerous charge
• Note wire positions and move them to the same terminals on the new switch
• Ensure the door latch cleanly actuates the switch; test operation before reassembly

This 30-watt incandescent appliance bulb restores bright, dependable lighting in your microwave so you can clearly see food and the cooktop. Replace a failed lamp to bring back full visibility while cooking. What it does:

• Provides 30-watt illumination as designed by the appliance—interior cavity or cooktop area on select models
• Restores visibility when the original bulb burns out or breaks
• Typical symptoms include no light, dim light, or flickering
• Blackened glass or a broken filament indicates the bulb needs replacement

• One 30-watt incandescent bulb

• Disconnect power at the plug or circuit breaker before servicing
• Allow the bulb and surrounding area to cool before handling
• Access the lamp cover or lens per your owner's manual; remove cover, replace bulb, and reinstall
• Replace only with the wattage and type specified for your model

This is the high-voltage magnetron for a microwave oven. It generates the microwave energy that heats food; replacing a weak or failed magnetron can restore normal cooking performance and resolve "runs but no heat" complaints.

• Generates the RF energy that cooks and heats inside the microwave cavity
• Common fix when the microwave runs but does not heat
• Symptoms can include unusually loud humming/buzzing during operation
• Helps with intermittent heating or a burnt odor from a failing tube

• Disconnect power and safely discharge the high-voltage capacitor before servicing
• Note wire locations; transfer any shielding, brackets, or insulators from the original as required
• Mount securely and ensure correct orientation for proper cooling airflow
• After reassembly, test heating with a cup of water

The Door Latch is an OEM part for GE microwaves. It securely holds the door shut during cooking cycles to contain heat, prevent leaks, and keep small children from accessing the cooking cavity. 

Symptoms of a bad door latch include:

• The door not staying closed properly 
• Gaps appearing around the sealed door 
• Difficulty latching or an insecure feel when closed
• Loose, gritty, or damaged movement of the latch mechanism

Causes of a bad door latch are typically wear over time from repeated use. Exposure to steam and heating elements can also degrade plastic and metal components. An improperly closing door presents potential safety issues by allowing excessive heat to escape.

This genuine GE replacement part is compatible with some Hotpoint, RCA, and Kenmore models as well.

This is a fuse that is used on microwaves. This fuse shuts off the microwave if there happens to be a power surge. This helps prevent damage to the microwave unit and also prevents fires from being started from the power surge. Be sure to unplug the microwave from its power source prior to attempting the replacement of the fuse. The process to replace the fuse is relatively easy and can be completed in about 30 to 60 minutes time.A new fuse may be needed if the microwave will no longer turn on. If the fuse has been blown, it will show scorch marks, and the filament inside will be melted.This fuse is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific fuse is compatible with microwaves that are manufactured by the General Electric brand.

The Control Panel Asm is an OEM replacement part for GE microwaves. It houses the electronic components and interfaces that allow users to operate the microwave functions.

Causes of a bad control panel assembly include damage from moisture damage, impact or drop damage over time, or failures in the electronic components' circuitry. 

Symptoms of a bad control panel include:

• Failure to illuminate or light up when buttons are pressed
• Inability to set power levels or time functions  
• Unresponsive or non-functioning buttons
• Display not working or flickering 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Installation Hardware Kit is an OEM part for GE over-the-range microwaves. It contains brackets and fasteners used to securely mount the microwave above the range cooking surface.

Symptoms requiring an installation hardware replacement include:

• Missing or damaged anti-tip brackets  
• Loose mounting screws or damaged mounting plates
• Inability to properly position and affix the microwave

Causes can be stripped mounts from over-tightening old hardware or components lost during a previous removal. Normal wear over extended use may also degrade hardware.

This genuine GE kit is compatible with some Profile and GE Profile series models as well.