Kdt207awh-O Parts

This air inlet damper controls cold-air flow from the freezer into the refrigerator compartment to help maintain proper fresh-food temperatures. Replacing a faulty damper restores balanced airflow and more consistent cooling. What it does:

• Regulates the amount of cold air entering the fresh-food section from the freezer.
• Opens and closes as the fridge cycles to maintain set temperatures.
• Commonly replaces stuck, broken, or noisy dampers that cause uneven cooling.
• Often used when the refrigerator is warm while the freezer remains cold or when temperatures fluctuate.

• Disconnect power to the appliance before starting any repair.
• Remove interior panels or grille per your model's service instructions to access the damper; keep screws and clips organized.
• Handle plastic fins and actuator gently to avoid damage; do not force the damper into position.
• Reconnect power and verify damper operation and temperature regulation after installation.

This OEM screw secures appliance panels and components to keep parts aligned and reduce vibration. It's a simple replacement fastener used where original mounting screws have stripped, backed out, or been lost. What it does:

• Fastens panels, brackets, or small components to the appliance frame
• Restores secure fit to stop rattling or loose trim
• Replaces missing or stripped screws that prevent proper assembly
• Works as a direct hardware replacement when the OEM screw is required

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug — do not over-torque to prevent thread damage
• Replace only like-for-like fasteners in the same location for proper fit
• If access requires disassembly, unplug the appliance and follow manufacturer safety instructions

This main wire harness routes power and signals between an appliance's control and its electrical components, restoring reliable electrical connections for proper operation. Use when a damaged or broken harness causes control or power problems. What it does:

• Connects the control board, sensors, switches and motors to supply power and signal paths
• Replaces frayed, burned or broken wiring that can cause intermittent operation
• Helps stop symptoms like no power to components, controls not responding, or intermittent cycles
• Restores correct routing and secure connector fit for safe operation

• Disconnect all power before starting and verify the appliance is de-energized
• Take photos of the existing harness routing and connector positions before removal
• Route the new harness the same way and fully seat each connector; secure with clips or ties as needed
• If you see heat damage at connectors or terminals, replace harness and inspect mating components.

This hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight on dishwashers and similar appliances. It's a simple replacement that restores a secure hose seal and prevents water from escaping. What it does

• Holds a drain or water hose firmly to a barb or fitting to stop leaks
• Restores a tight connection when original clamp is corroded, cracked, or loose
• Helps prevent water pooling beneath the appliance and related drip issues
• Typical use: clamp for dishwasher drain/water hose connections

• One hose clamp as pictured

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over hose, seat hose fully on the fitting, then tighten clamp evenly until snug
• Replace any corroded or damaged clamps; do not overtighten

This electronic control board manages the oven/dishwasher/washer console functions and restores responsive touchpad and cycle control. It replaces a failed control module to bring back reliable user input and timed operation. What it does:

• Interprets user commands from the console and sends signals to components
• Controls cycle timing, displays, and mode selection for proper operation
• Common symptom: unresponsive buttons, blank or erratic display, or incorrect cycle behavior
• Helps stop intermittent starting or failure to advance through programmed cycles

• One electronic control board as shown

• Disconnect power before accessing the control area to avoid shock
• Handle the board by its edges and avoid touching circuit traces or components
• Secure mounting and connector seating are required for proper function

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

The Drain Hose is an OEM part for Whirlpool built-in dishwashers. As the tube removes wastewater after each cycle, it plays a key part in sanitizing dishes. 

Causes of a bad Drain Hose can include mineral deposits inside over many years reducing flow. Cracks may also form from constant flexing as it transport water to the garbage disposer or sink drain.

Symptoms of a bad drain hose include:

• Puddles or pooling inside the dishwasher 
• Incomplete drainage leaving residue on dishes
• Leaks around hose connections

This genuine Whirlpool replacement is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore too. 

This control panel is the exterior trim that houses your appliance's controls and display, restoring a finished appearance and reliable button access for normal operation. What it does:

• Replaces damaged, cracked, or worn control-panel trim to restore cosmetic appearance
• Provides the mounting surface and openings for buttons, knobs, and the display
• Protects internal control components from spills and everyday wear
• Helps ensure consistent button/selector alignment for proper user input

• One control panel as shown

• Disconnect power to the appliance before starting any work
• Remove surrounding trim and fasteners to access and replace the panel; keep track of small screws and clips
• Handle the panel carefully to avoid scratching or bending during installation
• Transfer components exactly as removed

This control bracket secures the console or control housing to the appliance, keeping the control panel stable and properly aligned for reliable operation. Replaces a damaged or missing bracket to restore secure mounting and prevent panel movement. What it does:

• Mounts the control console to the appliance frame to prevent wobbling or sagging
• Keeps control buttons and switches aligned for consistent user operation
• Helps stop rattling or vibration noise caused by a loose control housing
• Supports wiring and components behind the console to reduce strain on connectors

• Always unplug the appliance or disconnect power before beginning service
• Remove the console or access panel per service instructions to reach mounting points
• Use appropriate screwdrivers or nut drivers; keep original hardware unless damaged
• Align bracket and tighten screws evenly; avoid overtightening to prevent stripping

This replacement support is a molded mounting bracket that secures internal components and helps keep assemblies aligned for reliable operation. It restores proper positioning and reduces movement or vibration that can cause noise or wear. What it does:

• Secures and supports an appliance internal assembly to maintain correct alignment
• Reduces vibration and rattling from loose or worn mounting points
• Helps prevent premature wear by keeping parts properly seated
• Restores fit where a broken, cracked, or missing support causes instability

• One support mounting bracket

• Disconnect power (and water, if applicable) before beginning any repair
• Access and removal may require removing panels or trim; keep fasteners organized
• Inspect adjoining components and fasteners; replace any damaged hardware

This wire harness routes power and signals between the appliance's control components and motors, switches, and sensors to restore reliable electrical connections. Replacing a damaged harness returns proper circuit routing and connection integrity. What it does

• Connects control board outputs to motors, switches, sensors, and other electrical components
• Restores broken, frayed, or corroded wiring that can cause intermittent or no operation
• Helps eliminate faults caused by loose or damaged connectors and open circuits
• Supports normal communication between components so controls can operate correctly

• One replacement wire harness as shown

• Disconnect power at the breaker or unplug the appliance before starting any work
• Compare the new harness to the original for connector type, length, and terminal locations before installation
• Route wiring away from sharp edges and moving parts; secure with existing clips or ties

The Lower Door Seal Assembly is an OEM part for Whirlpool dishwashers. As a key component, this seal is designed to create a tight barrier between the door interior and tub during wash cycles. The pliable rubber seal provides a sturdy gasket to block water, detergent, and sound.

Causes of failure involve mineral buildup, cracks from repeated use, or degradation of adhesive over time compromising the seal. 

Symptoms of a faulty seal assembly include: 

• Puddles or leaks from beneath the door frame
• Higher water consumption or longer cycles   
• Increased noise levels during operation

This OEM Whirlpool replacement is also compatible with select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and other brands.

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.