Kenmore 11022622100 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62837
Knurled pin secures knobs or dials to control shafts in washers. Replace if the original is missing, worn, or damaged to stop loose or spinning knobs.
Do-It-Yourself Stories from Customers like You
Whirlpool shaking Willy P. • Victorville , CA • May 19, 2019
Weekend laundry became very noisy, our 1987 Whirlpool washer began doing a dance across the floor and the drum was banging into the inner cabinet. After doing some research and watching a few videos on Appliance parts pros website. I inspected the washer and noticed one leg the rubber coating disintegrated, decided to change all four legs, springs and lid switch. Hardest part of the job is getting the cabinet together. Ops check good.
Read more
More
$7.47
- Compare At:
-
$8.89
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8568314
Secures the control panel to the washer cabinet. Replace if your console strap is cracked, broken, or missing, causing the control panel to sag or shift.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938
Gray acrylic spray paint for coating worn or chipped dryer drum interiors. Restores the protective finish when the original coating is scratched or flaking.
Do-It-Yourself Stories from Customers like You
Dryer drum completely wore off all coating Larry W. • Ubly , MI • July 01, 2016
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do
Read more
More
$46.95
- Compare At:
-
$55.87
- You Save:
-
$8.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614
Ground screw secures transmission housing and console components in washers. Replaces missing, stripped, or corroded screws. 10-24 x 3/8 inch fastener.
Do-It-Yourself Stories from Customers like You
Timer/control failed Gilbert G. • Lansing , IL • July 09, 2018
Replaced timer control unit, first time doing this.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357331
Leaking washer during drain cycle? This drain hose clamp secures the connection to prevent water leaks and hose pull-off from vibration or pressure.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3952955
Washer won't advance cycles or stops mid-program? This rotary timer controls cycle sequencing. Moderate DIY repair with multimeter testing recommended.
Do-It-Yourself Stories from Customers like You
Washer would only work at certain times Timothy G. • Rosemount , MN • October 20, 2014
I thought it was the timer, so I replaced it. (Dumb) That was not what I needed. The problem was the lid switch. All is well. New timer and lid switch, it runs like a new machine now
Read more
More
$196.70
- Compare At:
-
$232.11
- You Save:
-
$35.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168256
Washer not filling with hot or cold water, or stuck on one temperature? This temperature switch restores water temperature control. 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Movers broke temperature control know when bringing washing machine into the new house Karen S. • Canyon Lake , CA • January 05, 2015
Replacing the temperature switch and control know was easy! Took all of about 5 minutes.
Read more
More
$61.75
- Compare At:
-
$74.10
- You Save:
-
$12.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 285658
Replacement shaft sleeve bushing for washers. Fits over rotating shafts to reduce friction and protect surfaces. Replace when worn, cracked, or missing.
More
$9.50
- Compare At:
-
$10.45
- You Save:
-
$0.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP384496
Connects drain hose sections to prevent leaks and restore proper wastewater drainage. Replace if coupling cracks or connection leaks during draining.
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946792
Washer won't spin or vibrates excessively? This spring damper assembly cushions the drum during spin cycles, reducing vibration for smooth operation.
Do-It-Yourself Stories from Customers like You
My washer wouldn't go into a spin cycle. Joshua P. • Cohutta , GA • April 18, 2021
I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 285320
Prevents drain water from siphoning back into your washer tub. Replace if cracked, broken, or leaking. Installs on drain hose to maintain proper flow.
Do-It-Yourself Stories from Customers like You
I needed a siphon valve for an old maytag washer Shane F. • San Anselmo , CA • April 17, 2015
I bought a part and it worked perfectly. I was able to connect a flexible pipe to the siphon valve and set up a grey water system from our washing machine.
Read more
More
$49.75
- Compare At:
-
$58.70
- You Save:
-
$8.95
Genuine Whirlpool part
By: Whirlpool
Part Number: W10083190
Secures shafts and pulleys in your washer to prevent axial movement. Replace when worn or damaged to restore proper alignment. Confirm fit with model.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357027
Drain hose nozzle that attaches to the end of your washer's drain hose. Replace if cracked, broken, or missing to ensure proper hose connection.
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16272
Leaking water connection? This hose coupling creates a secure seal between your washer hose and water inlet, stopping drips and loose connections. DIY fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62505
Fixes sparking or loose motor connections causing spin issues. Replaces cracked or melted wiring harness connector. Straightforward repair, 30 minutes.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848
Fix washer control issues with this switch mounting screw. Secures cycle selector switch in console for reliable function. Simple DIY fix in minutes.
Do-It-Yourself Stories from Customers like You
Neptune mah4000 had a no spin but did pump water out but not all of it Guillermo S. • Chicago , IL • March 06, 2017
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13