Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator not cooling or making loud noise? A failing condenser fan motor prevents proper heat exchange. Typical DIY repair takes 30 minutes or less.
Replaced compressor fan. the video on the website showed step by step. very easy and it fixed the problem. Read more
Door shelf bar came loose or bottles falling? This refrigerator endcap secures retaining bars to door shelves. Simple snap-on install, no tools needed.
Looked up the parts list and diagram by serial number. Found the correct part numbers and ordered 2 crisper drawers, the meat drawer and the bar that holds bottles on the bottom shelf of the door. The diagram showed endcaps needed on the bar, but that was only for if the bar was for the freezer door. Parts were a little expensive, but we're beautiful and delivered in just a few days. I have endcaps I don't need, but might need someday if any of them in the freezer we're to break. Overall, it... Read more
Metal retainer bar that slides into refrigerator door shelf to hold bottles and containers in place. Replace if bent, dented, missing, or cracked.
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more
Fridge not cooling but freezer works? A worn evaporator fan blade prevents cold air circulation. Easy 15-minute DIY fix with our video guide.
I read some diagnostic suggestions provided by Appliance Parts Pros and determined fan needed replacing. I got the fan in two days! I used regular shipping and APP delivered on time. My story is that I live in the country and no one returned my calls for repair - so I figured I could get this done. I watched the online video on APP website. Opened up back of freezer after removing ice making and cleaning up ice buildup, I installed the new fan motor. It was easy and my fridge is now cooling... Read more
Replace your refrigerator door gasket to restore the seal that keeps warm air out and maintains proper temperature. Confirms fit by model number.
I look on the internet i came a cross appliance parts pros i didnt no what i was looking for so i call the phone number talk to someone gave him the info he ask for they has what i was looking for in stock the guy was very nice he say i will get the part in two days and i got it in two days if i need a part for anything else i will ckeck out appliance parts pros when the door gasket came my grandson put it on in a flash Read more
Plastic water supply line that connects household plumbing to your ice maker. Replace if cracked, pinched, severed, or leaking. 1/4-inch tubing kit.
I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more
Maintains an airtight seal on your freezer door to prevent warm air entry and cold air loss. Replace if door won't stay closed or ice crystals form.
The gasket on my freezer door was not holding the door closes. When the main door closed, the pressure which shifts to the freezer was popping the door open and it was not closing because the magnet had lost its' mojo. I watched the video for the replacement of the gasket on the freezer door and my experience was exactly the same. One area that you should be mindful of: the depth of the fin on the replacement gasket is short, so do not make the slot of this fin too deep. When you are... Read more
Replace your refrigerator's interior light bulb when dimming, flickering, or burnt out. Restores visibility inside fridge and freezer compartments.
I ordered my bulb from AppliancePartsPros.( By the way it only took 2 days to get my order). Put it in and now I have light ! Thank you so much !! Read more
Plastic endcap that fits on the end of refrigerator shelf trim for a finished look. Replace if cracked, broken, or missing to secure trim in place.
I took the old shelf bar out the door and replaced it with the new one. Fit perfectly. Looks awesome. Read more
Fastening screw for securing refrigerator door handles and interior panels. Replace when stripped, corroded, sheared, or missing during handle repairs.
I ordered a new handle from Applisnce Parts Pros. It fit the refrigerator perfectly. I reused some of the old screws and ordered one new screw with a cover to attach the bottom of the handle. Now the refrigerator looks as good as new! Read more
Freezer frosting up or refrigerator not cooling? The defrost timer controls the defrost cycle. DIY-friendly repair, typically 30 minutes to install.
Replaced the heater, timer, and wiring harness Read more
Ice scattered in freezer or missing ice storage? This refrigerator ice bin collects and stores ice from your icemaker. Easy slide-in installation.
Just slid it under the ice maker Read more
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more