Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Cushions contact between washer lid and top panel. Replace if cracked, missing, or worn to prevent slamming noise and protect the finish from damage.
Removed lid sanded down all rust spots, taped over the printed instructions on the inside of the lid, washed with alcohol and spray painted with appliance white epoxy paint. Replaced the plastic hinge-balls and one of the lid support/bumper grommet. It was actually easier to install the lid than removing it; used a small amount of grease to hold both balls in place, by holding the lid vertical and placing the left side to the inserted ball and then pushing the right side down. The lid slides... Read more
Washer making noise or controls not stopping correctly? This stop lug limits component movement to prevent over-travel. Simple snap-in repair.
I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more
Small metal clip that secures panels, brackets, or tubing in place inside appliances. Replace if bent, fatigued, or missing to restore secure mounting.
Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more
Replace this washer gasket seal to stop leaks between components. Worn gaskets cause water leakage and poor performance. Verify fit with your model.
We ordered parts from appliance parts pros and I fixed it. Read more
Inlet hose strainer and washer kit for washers. Replace if you notice leaks at hose connections or reduced water flow. Confirm fit with your model.
Mounting bolt secures the tub and internal components in your laundry center. Replace if stripped, rusted, or missing to restore stable assembly fit.
Purchased and installed new tub bearing and seals. Decided to replace the tub bolts as well, since I had it apart. Now if I could just find a new outer tub (which the manufacturer has discontinued). Appliance parts pros has a great "how to" video which made it simple! Read more
Washer screeching or brake not engaging properly? This brake lug stop limits pulley travel to restore smooth, safe operation. DIY repair part.
Replacement mounting screw secures panels, brackets, and trim to the appliance frame. Needed when original screw is stripped, missing, or damaged.
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Tension spring restores proper movement in washer mechanical assemblies. Replace if parts sag, rattle, or don't return to position. Confirm fit by model.
The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more
Washer only spinning or making grinding noises? This drive assembly spacer washer maintains proper clearance between components for smooth, quiet operation.
Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more
Secures trim pieces, molding, and decorative panels on your washer. Replace when fasteners are missing, loose, or causing rattling for a finished look.
Secures pedestal panels, brackets, and trim pieces. Replaces missing, stripped, or damaged screws to restore proper alignment and eliminate rattling.
By ordering the screws and pads from appliancepartspros.com which were delivered practically overnight! The service was beyond expectations! Read more
Fix agitator wobble and excessive vibration with this retaining washer. Secures center-mounted components to prevent looseness and noise during operation.
Not one to patch a job, I ordered all seal kit, bearing kit, new shaft keeper, transmission oil, spanner wrench. I have the newer version of the agitator shaft so it does not have the groove for the internal clip. I Custom ground a thick washer so that as the agitator shaft goes into the transmission it fit flush into the slot for the old style shaft clip. With the plastic keeper in position I marked and pull the shaft. I drilled a hole that would be fit tight against the custom washer and used... Read more
Factory fastener screw secures dryer panels, brackets, and internal components. Replace missing, stripped, or damaged screws to restore tight fit and alignment.
This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more
Secures the terminal block to your range's back panel. Replace if stripped, corroded, or missing to ensure safe electrical connections. 10-32 size.
Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more