Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces a broken, cracked, or missing water dispenser button on your refrigerator. This snap-on part installs on the dispenser housing panel.
Replaced plastic housing for $100. Recommend buying the whole assembly though. Cost a bit more but you would be done in 15min. When you just replace the housing, you have to disassemble the old one very carefully to reuse several parts that do not come with the housing. A lot of fragile plastics. Plus, make sure you have GooGone and 3M thin tape handy; you will absolutely need it. Again, buy the whole assembly and save time and headache. Read more
Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.
Went looking for the spring for my refrigerator door mullion and it is not available for my model. Was told that I had to purchase the entire mullion for $130. Saw some videos on the web about replacing the spring making sure I got the one with the right number of coils. My broken one had 6 coils, I looked at the picture of the spring and counted six coils so I bought it and it worked fine. Read more
Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.
Watched the replacement video on the website and also on youtube. The part identification was facilitated by viewing the schematics provided on the website. Ordering was simple and the job was easily completed. Read more
Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.
After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more
Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.
Just wanted to say how incredibly nice and helpful the gentleman was that helped me on the phone when I called to place the order. Very nice..... Read more
Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.
Ordered the plastic glides that connect to the metal rails. Super easy fix! Read more
Fridge won't cool or evaporator coil freezing over? The defrost control assembly regulates cooling and defrost cycles. Moderate DIY repair.
Removed back cover in refrigerator to find the coil frozen. I ordered the part overnight and I replaced the defrost sensor, now all is well!! Fast and easy thanks to AppliancesPartsPros.com!! Read more
Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.
I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great. Read more
Replace your refrigerator's front panel display assembly when cracked, delaminating, or broken. Snaps into door front, houses controls and dispenser lever.
Ordered the entire control panel. Took only 30 minutes to replace. Once I received the new part, it was obvious how easy it would be to replace. A thin putty knife and a little care not to damage the surrounding surface was all that was needed. Read more
Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.
Replaced tank assembly. Actually I think the supply hose was originally not fully seated in the tank and I think I could have re-seated it deeper through the gray bushing. When I set the line into the new tank, still leaking. Pulled out supply line and reset using a little more force and line went into the tank. Took the bushing clip off the other tank and used it for the supply line bushing. So far, no leaks. The thing to remember is to push the edges of each hose bushing inward to pull... Read more
Ice won't dispense but ice maker works? The auger motor drives ice from the bin to the chute. Moderately easy repair with our video guide and DIY tips.
Replaced it Read more
Ice maker not dumping ice or auger motor making grinding noise? This assembly produces and dispenses ice. DIY repair in under 20 minutes with video guide.
Looking online for ice maker repairs on LG, came across several videos. AppliancePartsPros.com had a very good video, after watching I looked up my model reference and found the assembly I needed. Easy online order had the part in 2 days. I installed it as the video had directed, easy to install with only a screwdriver. Great experience. Read more
If your refrigerator shows an ER RF error code or won't cool properly, this fan motor assembly restores airflow. Moderate DIY difficulty repair.
According to LG site error code is Refrigerator Fan. I removed the current fan by taking out the shelves. Then removing the bottom left track that is held in by 2 screws and a tab. Then you remove the plenum in the back. To do so, remove 2 screws under that hold the middle rack support. You need to lift up the covers that cover the screws. Once you have done that, pull down on the plenum, then pull forward and remove. You need to un-plug the fan to remove the plenum. Once that is... Read more
Crisper glass shelf sits above crisper drawers in your refrigerator. Replace if cracked, shattered, or broken. Provides clear view and support.
After an extremely fast delivery by AppliancePartsPros.com, all I had to do was cut the box open, unpackage the glass, and lay it in place. It was a perfect fit (thanks to the very detailed schematic on the website. From order to installation - 48 hours. Read more
Supports and guides the lower freezer drawer for smooth opening and closing. Replace if rail is cracked, broken, or drawer no longer glides properly.
Had the model number of the refrigerator and went on the web looking for a diagram to find the part that I needed. Found and bought the rails and attached the new one in the freezer. Very easy fix. Read more
Covers and protects the dispenser area on your refrigerator. Replace if cracked, broken, or scratched from repeated use and moisture exposure.
Very helpful video from a link on your website (https://www.youtube.com/watch?v=EBIv0bxEhkE), and saved me a major repair bill. My journey started with an effort to replace just the water dispenser button, which failed because the fifth post on the back side of the button (not the four posts which hold the button in place--it's the extra rectangular piece visible near the repairman's pinkie finger at 3:04) had broken off, and it is this piece which reaches and moves the actuator for the water... Read more