Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ok so my mom called GE and a service man came out. He said no good. The refrigerator was to old to be fixed. You will have to buy a new one .. ok so with that said he collected his $100 dollars service fee !!! I slid the refer out and started tinkering with it. I went on line and hit your web page saw schematic map and ordered fan motor because the one on refer wouldn’t turn !!!! You guys delivered it on a Sunday ( perfect) I put it in carefully and bam it worked. I was in shock that it was... Read more
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Ordered parts from appliance parts pros and completed installation myself Read more
Lower fresh food section.
I needed to find a parts supplier who could provide a replacement part at a reasonable price. I first tried the manufacturer, General Electric, but they only showed freezer replacement parts for the model of my side-by-side refrigerator. In looking over a list of parts available for this model there seemed to be a possible part that sounded like a match but there was no picture to confirm that this was the correct replacement part. When i clicked the Appliance Parts Pros web site They had a... Read more
Swapped it out for new tube. Take 5 minutes and zero effort. The drain tube will clog with mold. You can clean it out but the tube will clog again despite's you best efforts as the tube wall provide a great habitat. Ordered new tubes to facilitate swap-outs. Old tubes can be cleaned but will recolonize quickly. Read more
Left side.
Changed all door switches and used rubber eraser to clean connections on touch panel ribbon cable. Read more
This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.
Replaced the deflector Read more
Took off the stove top, ordered a new module. It was here in 24 hours. Amazing. Stove works fine now. Saved me from a major repair bill. Read more
Ordered a replacement, installed and problem corrected. One drip pan seal also needed to be replaced and was easily fixed with the Seal-Tape. I removed the right rear drip pan to access and replace the spark module. Easy repair. Read more
Found that piece of auger was broken up front. Ordered auger and several other parts associated with ice maker just to be sure. Also replaced condenser motor which was making noise. Read more
My son searched the internet for replacement hinges. Found them at Appliance Parts Pros.com. The stove is approximately 18 years old, so imagine my surprise! The parts were delivered 2 days after our order was placed...and arrived on Christmas Eve, in time for dinner. To install, he did have to purchase a single die/tappit thingie to make the screws work. He is so good at this stuff and whatever he did worked!! Guess what? I was able to bake a pineapple upsidedown cake for breakfast on... Read more
This is a double burner bowl. It is black in color.
Drip pans were dirty. Replaced them. Good website, good prices, quick delivery. Excellent. Read more
First I ordered spark igniters but was unable to remove screw securing them. So decided to replace whole burner. Item went in well. It does work but takes a bit to ignite. I'm thinking in might need to replace screws, rusted, for better ground. It's odd that when burner is warm we have no problem with ignition. Hoping new screws will solve it. Read more
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more