Maytag Mdb6709awq1 Parts

This control panel is the console assembly that provides the appliance's user interface, giving reliable access to cycle settings and status indicators so you can select and monitor wash/dry functions easily. What it does:

• Houses buttons, touchpads, and display elements used to start cycles and adjust settings
• Communicates user selections to the main control board so the appliance runs chosen cycles
• Restores missing or unresponsive controls and unreadable display elements
• Common symptoms: unresponsive buttons, blank or unreadable display, or non-functioning cycle selection

• One control panel/console assembly

• Disconnect power before starting — electrical shock hazard
• Replace only if confirmed faulty; follow service manual steps for access and connector handling
• Handle the display area and ribbon/connector cables carefully to avoid damage

This control panel is the console assembly that houses the oven/range touch controls and display, restoring the user interface so you can set temperatures, timers and modes reliably. What it does:

• Provides the touchpad buttons and digital display for selecting oven or range functions
• Sends user commands to the appliance's control board so cycles and settings start as selected
• Commonly replaced when buttons are unresponsive, the display is blank or characters are missing
• Also used when the panel is cracked, cosmetically damaged, or the control surface is worn

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the assembly carefully to avoid damaging the display or ribbon/connector cables
• Installation typically involves removing trim and disconnecting/reconnecting wiring harnesses; retain all fasteners

This dispenser cover (shield) replaces the plastic trim that surrounds a refrigerator's dispenser opening, restoring a clean finished look and helping direct water or ice into your cup. Fits where the dispenser meets the cabinet face. What it does:

• Covers and protects the dispenser opening, preventing chips and cosmetic damage
• Helps guide water and ice into cups for more accurate dispensing
• Hides internal dispenser components for a finished appearance
• Can reduce direct contact with moving dispenser parts

• One dispenser cover (shield)

• Remove power to the appliance before servicing to avoid electrical or injury risk
• Typically installs by snapping into place or fastening with a few screws; keep hardware if reusing
• Inspect surrounding trim for damage and replace any broken clips or screws for a secure fit

This handle grip mounting is the replacement mounting piece that secures a refrigerator/freezer door handle to the door, restoring a solid, correctly aligned handle for normal opening and closing. What it does:

• Secures the handle grip to the appliance door so the handle stays firmly in place
• Replaces cracked, broken, or worn mounting that lets the handle wobble or come loose
• Helps restore proper handle alignment and function for safe door operation
• Fits where the handle attaches to the door; works with the matching handle grip

• Disconnect power or unplug the appliance before beginning any work
• Use basic hand tools; retain fasteners and check fit before final tightening
• Avoid overtightening fasteners to prevent cracking the new mounting

This loose bag assembly is a direct-fit replacement designed to restore the original containment or collection function in compatible Whirlpool appliances. It provides a simple swap to fix a damaged or missing bag and keep the appliance operating as intended. What it does:

• Replaces a worn, torn, or missing bag used for containment or collection in the appliance
• Restores proper collection and helps prevent debris or material from escaping into the appliance cavity
• Helps reduce related performance issues that occur when the bag is damaged or absent
• Matches OEM form and fit for an easy, reliable replacement

• One loose bag assembly as shown

• Turn off and unplug the appliance before attempting replacement
• Remove any panels or components required to access the bag
• Install the bag in the correct orientation and secure all fasteners or clips
• Inspect surrounding seals and openings; replace any damaged parts to ensure proper operation

A flat washer used with fasteners on select top-load and front-load washer assemblies to distribute load and prevent loosening. Replaces worn or missing washers to help stabilize mounting points and reduce vibration where metal parts join. What it does:

• Provides a smooth bearing surface between a bolt or nut and the mating part
• Helps distribute clamping force to prevent damage to housings or panels
• Reduces loosening from vibration or thermal cycling
• Common fix when mounting hardware is loose, rattling, or causing leaks at joins

• Inspect mating bolt, nut, and surface for wear or damage before installing
• Use correct size and orientation; do not overtighten fasteners
• Disconnect power to the appliance and follow safety procedures when accessing internal parts
• Replace all related fasteners to ensure proper fit

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This manifold routes flow from the appliance's supply to downstream components, restoring proper distribution and reliable performance. Replacing a cracked or obstructed manifold can stop leaks and help resolve weak or inconsistent operation.

• Directs flow from the inlet to the appropriate branches within the system
• Helps maintain correct pressure and delivery to connected components
• Seals at connection points to prevent drips and leaks
• Typical failure signs: visible cracks, leaks at joints, weak output, or intermittent performance

• Disconnect power and shut off the appliance's supply (water or gas, as applicable) before servicing
• Note orientation and transfer any reusable seals, clips, or fittings from the original part if required by your model
• Inspect O-rings/gaskets; replace any that are brittle, flattened, or damaged
• Restore supply and run a test cycle; check all connections closely for leaks

This replacement lever operates the overflow/level switch assembly to help the washer detect and respond to water level changes. It restores the mechanical action that tells the control when the tub is full. What it does:

• Moves the overflow/level switch mechanism so the machine can sense water level correctly
• Helps address overfilling, continuous filling, or erratic fill behavior caused by a worn or broken lever
• Restores reliable engagement between the float/actuator and the switch
• Works as the mechanical linkage for the overflow/level sensing assembly

• Disconnect power and turn off the water supply before beginning service.
• Access typically requires removing the cabinet or control console; keep fasteners organized.
• Install the lever so it aligns with the switch actuator and float linkage; verify smooth movement after assembly.

This door basket is the replacement shelf that mounts to the inside of a dishwasher door to hold small items and organize silverware. It restores secure storage and proper loading on the door for reliable washing. What it does:

• Provides a stable shelf on the dishwasher door to hold small items and cutlery during cycles
• Keeps utensils and small items separated to improve water flow and cleaning
• Replaces cracked, broken or missing door-mounted storage that lets items fall or shift
• Helps maintain proper door alignment and sealing when clipped into place

• One door basket

• Disconnect power to the appliance before beginning any work
• Remove items from the door and open the inner door panel as needed to access mounting clips
• Align the basket with the door mounts and snap or secure it into place; verify it seats firmly