Maytag Mgs5770adb Parts

This sealed burner igniter is the spark electrode for a gas cooktop burner. It creates the ignition spark at the burner head so your surface burner lights reliably when you turn the control knob.

• Produces the high-voltage spark that ignites gas at a sealed surface burner
• Helps resolve a single burner that won't light or lights intermittently
• Common signs: no visible spark at that burner, continuous clicking without ignition, or a cracked/chipped ceramic insulator
• A shorted or misaligned electrode can cause the spark to jump to ground instead of the burner

• Disconnect power and shut off gas supply before servicing
• Remove the burner cap and head; lift the cooktop if needed to access the electrode
• Handle the ceramic insulator carefully; disconnect/reconnect the wire lead and reuse mounting hardware
• Align the tip toward the burner port and secure; verify a strong, consistent spark before reassembly

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

• Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
• Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
• Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
• Small hardware solution for common fastening failures—no special part modifications required.

• Disconnect appliance power and water before beginning repairs.
• Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
• Tighten to a snug fit—do not overtighten or force onto damaged threads.
• Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

A replacement black valve knob that lets you turn and set a range or cooktop control with a secure grip. Restores lost or damaged control knobs so settings can be changed safely and accurately. What it does:

• Fits onto a range/cooktop control shaft to provide a user grip for adjusting burner/valve settings
• Replaces cracked, melted, stripped, or missing knobs that won't turn or slip on the shaft
• Helps restore clear tactile feedback and detents for more accurate temperature/heat selection
• Compatible with shafts that accept this style of push-on valve knob

• One (1) black valve knob

• High-level: Remove the old knob by pulling straight off the control shaft; push the replacement on until fully seated
• Safety first: Always turn appliance controls off and disconnect power (and gas supply if applicable) before servicing
• Check shaft shape and alignment to ensure proper fit; do not force the knob onto an incompatible shaft
• If knob is brittle or binding, inspect the control shaft and switch for damage before use

This orifice hood directs LP (liquid propane) gas to the burner for correct flow and stable flame performance. It's used when servicing or replacing the small gas orifice assembly on compatible gas cooktops and ranges. What it does:

• Seats over the burner orifice to help shape and protect the gas jet for proper combustion.
• Restores correct flame size and stability when a worn or damaged hood causes weak or uneven flames.
• Can resolve ignition issues or yellow/turbulent flames when the hood is cracked, clogged, or deformed.
• Intended for LP (liquid propane) systems — not a universal orifice size for all fuel types.

• One orifice hood (LP 0.49), single piece as shown.

• Only install if part number and fuel type match your appliance; follow the appliance service manual for disassembly/reassembly.
• Turn off gas supply and electrical power before servicing; verify there is no gas odor before testing.
• Use basic hand tools; avoid forcing fittings or overtightening components.

This ignitor switch assembly controls the spark/ignition signal for gas cooktop/oven burners, restoring reliable ignition and safe burner operation. It replaces a worn or failed switch to help re-establish consistent spark firing. What it does

• Sends the ignition spark signal to the burner when a cooktop or oven control calls for ignition.
• Commonly replaced when burners fail to light or ignition is intermittent.
• Helps eliminate clicking without ignition when the switch portion of the ignitor circuit is faulty.
• Works with the appliance's existing ignitor/spark system.

• Disconnect power and shut off the gas supply before attempting service.
• Handle the assembly and any ceramic/sensitive components with care to avoid damage.
• Replace only the faulty switch assembly; secure all connectors.
• After installation, restore power/gas and test all burners for proper ignition and safe operation.

This wing nut is a hand-tightening fastener used to secure small appliance components for easy tool-free adjustment or removal. It offers a simple replacement when the original nut is lost, stripped, or broken. What it does:

• Secures panels, brackets, or components that require occasional removal or adjustment
• Allows tool-free tightening and loosening with built-in wings for finger grip
• Restores proper fit where a missing or damaged nut causes rattling, looseness, or instability
• Designed for repeated hand-operation without specialized tools

• Disconnect power to the appliance before performing any work to avoid shock or injury
• Thread by hand until snug; avoid overtightening to prevent stripping threads or cracking surrounding parts
• Inspect mating threads and replace if damaged to ensure secure fastening
• Use appropriate size and thread type—do not force a mismatched nut onto the stud

Color: Gray. This is a set of two gas range double drip pans. This kit replaces black which is no longer available.