Maytag Mvw8450wq0 Parts

Right hand side

Control transformer that provides stable low-voltage power to the washer's control and user interface, ensuring reliable electrical signaling so cycles start and the machine operates correctly. What it does:

• Supplies the control board and user controls with the required control voltage.
• Restores power to displays, timers, and electronic controls when the transformer has failed.
• Common symptom: machine is dead, display is blank, or cycles won't start.
• Can cause intermittent power or control glitches before full failure.

• Disconnect power before servicing to avoid shock—follow lockout/tagout if required.
• Compare part number and mounting style to the original before installation.
• Handle terminals and wiring carefully; secure all connections and mounting hardware.

This outer tub is the main water-holding housing for a top-load washing machine. It supports the inner basket and seals the wash chamber, helping the washer contain water and direct proper wash action. What it does:

• Holds wash water and surrounds the inner basket during fill, wash, and rinse cycles
• Supports the inner tub and transmission/agitator assembly for stable operation
• Prevents leaks by maintaining the sealed wash chamber; a cracked tub can cause visible water under the machine
• Helps reduce noise and vibration by keeping the wash components aligned

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain any remaining water from the tub and remove the washer cabinet or top to access the tub
• Transfer any components (basket, agitator, seals, mounting hardware) only if explicitly listed in your parts list; replace worn seals and gaskets when reinstalling

This replacement nut secures appliance parts and hardware to keep assemblies stable and prevent loose connections. It's a simple, direct replacement for worn or missing fastening hardware to restore proper fit and reduce vibration. What it does:

• Fastens mounting studs, brackets or panels to hold components in place
• Restores secure mechanical connections that can loosen over time
• Helps eliminate rattling, vibration and misaligned panels caused by missing or stripped hardware
• Provides a straightforward, durable replacement for corroded or damaged nuts

• Disconnect power to the appliance before beginning any repair
• Use the correct-size wrench or socket; ensure threads engage smoothly before tightening
• Tighten until snug—avoid overtightening that can strip threads or damage components
• Inspect mating threads and replace any damaged studs or hardware for a reliable repair

This ACU program assembly is the main control board that runs washer cycles and settings, restoring proper cycle selection and timing when the electronic control fails. It plugs into the washer's control harness and manages user commands. What it does:

• Controls wash cycle selection, timing, and transitions between fill, wash, rinse, and spin
• Processes user inputs from the console and communicates with sensors and valves
• Commonly replaced when the washer won't start, cycles incorrectly, or doesn't respond to controls
• Helps resolve intermittent operation, unresponsive buttons, or incorrect cycle behavior

• One ACU program assembly (main control) as shown

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board by its edges and avoid contact with circuitry to prevent static damage
• Verify connector seating and wire harness condition during replacement
• Refer to the manufacturer's service manual for model-specific removal and reassembly instructions

This fill hose carries water from the home supply to the appliance inlet valve, restoring proper water fill and helping prevent leaks when the original hose is cracked, worn, or blocked. Ideal for replacing damaged inlet lines. What it does:

• Delivers water from the household supply to the appliance inlet valve for normal fill cycles.
• Replaces cracked, split, or deteriorated hoses that can cause leaks at connections.
• Resolves symptoms such as slow or no water fill, visible leaks, or intermittent filling.
• Durable replacement designed to match OEM routing and connection points.

• Always shut off water supply and disconnect power before starting work.
• Inspect and replace hose clamps or inlet gaskets as needed; ensure proper seating to prevent leaks.
• Hand-tighten fittings and secure clamps—avoid overtightening metal fittings.
• After installation, restore water and power and run a short fill cycle while checking for leaks.

The User Control and Display Console is an OEM part for Whirlpool washing machines. It houses the digital display and membrane buttons that allow for cycle and setting selection. As the interface constantly subjected to touch during use, this console can show normal wear like faded graphics or non-responsive buttons over time.

Causes may include extended use wear from repeated cycling as well as occasional moisture exposure inside the console.

Symptoms of a faulty console include:

• Cycle or temperature buttons not responding
• Unreadable or blank display screen
• Inability to scroll through options

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This lower wiring harness connects the washer's VMax 2.0 drain pump to the lower control components, restoring reliable electrical connections for proper pump operation and consistent drain cycles. What it does:

• Routes power and signal between the VMax 2.0 drain pump and the washer's lower control assembly.
• Replaces frayed, pinched, or damaged wiring that can cause the pump to run intermittently or not at all.
• Helps resolve symptoms such as no-drain conditions, intermittent pumping, or pump-related error codes.
• Matches original connector ends and routing to fit the factory wiring path.

• Disconnect power to the appliance before attempting any repairs.
• Access the harness by removing the washer's appropriate access panels per the service manual.
• Follow the original wire routing and fully seat all connectors; avoid pinching or stretching the harness.

This electronic control board replaces the appliance's main logic board to restore control and cycle programming. It ensures the unit responds correctly to user commands and runs appliance cycles as designed. What it does:

• Receives inputs from the user interface and sensors to control cycle selection and timing
• Manages power to motors, valves, and other components per programmed cycles
• Can resolve symptoms like unresponsive controls, failure to start, or erratic cycle behavior
• Helps correct programming errors caused by a failed or damaged control board

• Disconnect power before servicing to avoid electrical shock or damage
• Handle the board by the edges and avoid static discharge; use antistatic precautions if possible
• Verify connector seating and wire harness orientation during reassembly

Size: .20 Fl. Oz. (6 ml)

Screw: 8-16 x 3/8 inch.

This small tension spring restores the return force in the top lock mechanism so it latches securely and releases smoothly. Replacing a fatigued spring helps the lock operate consistently and keeps the panel/top properly secured.

• Provides the return/tension force for the lock lever or arm
• Helps the lock engage fully and stay secured under vibration
• Restores proper latch feel and consistent lock/unlock action
• Common signs include a loose/floppy lock, poor engagement, or the lock not returning to position

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Note the spring's routing/orientation before removal
• Use needle-nose pliers; mind sharp edges and pinch points
• After installation, manually check lock movement for smooth travel

Replacement fabric softener dispenser assembly for top-load washers. Restores proper softener release during the rinse cycle so your clothes get even conditioning while preventing pooling, clogs, and leaks from a damaged dispenser. What it does:

• Delivers fabric softener into the rinse cycle for even distribution and improved fabric feel.
• Replaces a broken, cracked, or clogged dispenser that won't release softener.
• Stops softener from pooling in the drawer or leaking into the washer tub.
• Re-establishes correct dispenser operation so the washer times and releases additives properly.

• Disconnect power (unplug) and turn off water before servicing the washer.
• Remove the dispenser drawer, drain any remaining softener, then remove and replace the assembly in the correct orientation.
• Reinstall the drawer, restore power/water, and run a rinse cycle to check for leaks.

This factory washer is used in appliance assemblies to distribute load under a fastener and maintain a secure, accurate fit. Replace a missing or damaged washer to restore proper stack-up and reduce vibration, noise, or loosening.

• Distributes load and provides proper spacing in the fastener assembly
• Helps keep bolts, screws, or nuts tight to minimize vibration and rattling
• Direct replacement when the original washer is worn, bent, cracked, or missing
• Typical signs include loose panels/brackets, recurring looseness after tightening, or new vibration after service

• Unplug the appliance; shut off water supply if working near hoses or valves
• Note the original hardware stack-up and reassemble in the same order
• Inspect mating surfaces and companion hardware; replace any damaged parts
• Tighten fasteners snugly per service guidance; avoid overtightening

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

• Connects hot and cold water faucets to the washer's inlet valves
• Replace if hoses are leaking, cracked, bulging, or kinked
• Can help address slow filling caused by restricted or kinked hoses
• Useful when installing or relocating a washer

• Unplug the washer and shut off both water supply valves before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
• Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
• Restore water and power; run a fill test and check all connections for leaks

The Power Cord is an OEM part for Whirlpool washing machines. It delivers electrical power from the wall outlet to internal components inside the washer cabinet. Made of insulated copper wiring housed within a tough flexible jacket, this cord prevents shocks and ensures reliable power delivery.

Causes can include normal wear over many machine cycles. Rodent chewing, cracking from overly tight bends, or cuts from sharp metal edges are also possible.

Symptoms of a failed power cord include:

• No power to washer control board or motor
• Tripped breaker after plugging washer in
• Bare or frayed copper wiring exposed
• Brittle, cracked cord jacket

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.