Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Maytag Pdc3600awx Parts

Tub Wheel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002947

Attaches to the inner tub for the upper rack

Do-It-Yourself Stories from Customers like You Left hand rack adjuster   Thomas H. • West Blocton , AL • March 20, 2016

Replaced left hand rack adjuster. Read more

More
$13.95
Compare At:
$16.74
You Save:
$2.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (Pan Head #8 X 1-1/4)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-24004-109

Pan-head screw used to secure panels, brackets and trim on Whirlpool appliances. Replacing a damaged or missing screw restores proper fastening to reduce vibration and keep assemblies aligned during operation. What it does:

  • Secures panels, brackets and trim pieces to the appliance chassis.
  • Stops loose panels from rattling, vibrating or shifting during use.
  • Used when the original screw is stripped, corroded or missing.
  • OEM replacement that restores the original fastening point.
What's included: One pan-head screw. Install notes:
  • Unplug the appliance or shut off power before working on it.
  • Use the correct screwdriver or bit to avoid stripping the head.
  • Tighten until snug—do not overtighten or force in plastic parts.
  • If the original hole or threads are damaged, inspect the surrounding area before reuse.

Do-It-Yourself Stories from Customers like You Missing crisper drawer   Doug D. • Peoria , AZ • March 23, 2020

Looked up model on your website. You had all the parts I needed, numbered and visually shown. Perfect! Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Lid Hinge Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-912678

This is the longer of the two dispenser lid hinge pins. For the shorter lid hinge pin order WPY912679.

Do-It-Yourself Stories from Customers like You Problem with detergent cup lid.   John M. • Craig , CO • November 27, 2017

The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more

More
$10.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Silverware Basket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99001576

Color: White. This basket measures about 9 inches wide by 7 inches high by 6 inches deep. The cover and handle are not included. The cover is no longer available. For the handle order W11033847.

Do-It-Yourself Stories from Customers like You Silverware basket in older dishawasher was broken at bottom & items fell out in the dishwasher area.   Molly F. • Truckee , CA • March 24, 2014

Bought a new one that you had available. Best reliable source I have found to date. Read more

More
$28.95
Compare At:
$34.74
You Save:
$5.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Lid Hinge Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY912679

This is the shorter of the two dispenser lid hinge pins. For the longer lid hinge pin order WP6-912678.

Do-It-Yourself Stories from Customers like You Problem with detergent cup lid.   John M. • Craig , CO • November 27, 2017

The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more

More
$3.95
Compare At:
$4.70
You Save:
$0.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Indicator Light
Genuine Whirlpool part
By: Whirlpool
Part Number: WP903115

To order indicator lens use WP22001948.

More
$5.37
Compare At:
$6.34
You Save:
$0.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Door Switch (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002207

This door switch detects when the dishwasher door is fully closed and latched. Replacing a worn or intermittent switch restores reliable start/stop operation and ensures the safety interlock cuts power whenever the door is opened.

  • Senses door-closed status and sends a signal to the control
  • Interrupts power to the machine when the door opens
  • Helps prevent operation with an unlatched door
  • Typical failure symptoms: won't start, stops mid-cycle if the door is bumped, or only runs when pressing on the door
What's included: One door switch. Installation notes:
  • Disconnect power at the breaker before servicing
  • Access the latch/switch area by removing the inner door panel or console; note wire locations
  • Transfer wires one at a time and secure the new switch in the bracket
  • Verify latch engagement and switch actuation before restoring power

This part fixes the following symptoms
  • Won't start
See more...
More
$27.95
Compare At:
$33.26
You Save:
$5.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY013783

This small retaining clip secures components in place inside the appliance, helping prevent movement, vibration, and premature wear. Replace a bent, fatigued, or missing clip to restore a solid, factory-tight hold.

  • Holds panels, brackets, or tubing securely in their mounts
  • Helps maintain alignment to reduce rattles, rubbing, or intermittent issues
  • Common signs of failure: missing clip, loose fit, buzzing/vibration, parts that won't stay seated
  • Restores proper retention after service, transport, or vibration-related fatigue
What's included: 1 clip Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note the original clip's orientation; remove with needle-nose pliers
  • Seat the new clip fully—do not over-bend; spring tension provides the hold
  • Test operation before reassembly

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.45
Compare At:
$7.68
You Save:
$1.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Rack Stop (White)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002136

This rack stop clips onto the end of a dishwasher rack rail to keep the rack from sliding off the track. Replacing a worn or missing stop helps the rack glide securely and prevents accidental pull-outs during use.

  • Prevents the rack from being pulled out too far and falling off the rail
  • Helps restore smooth, secure rack operation
  • Common fix for racks that slide out too far or feel unstable
What's included: One white rack stop Install notes:
  • Disconnect power and turn off water before servicing
  • Pull the rack forward, depress the old stop's locking tab, and remove
  • Align and snap the new stop onto the rail end until it locks
  • Check rack travel to ensure the stop is fully engaged

Do-It-Yourself Stories from Customers like You Stop rack cap was lost   Joan R. • St Augustine , FL • March 14, 2015

Researched on web. Figured it out from your site. Spoke to helpful representative who confirmed fit. Ordered part Arrived timely as promised. The only thing that would have helped more would have been instructions. The stop rack cap came in parts in a mold. We finally figured out we had to snap them apart. No big deal. All in all a great experience. Read more

More
$17.22
Compare At:
$20.66
You Save:
$3.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Dispenser Grommet (Detergent/Rinse Aid), 1 Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99001553

This small rubber grommet seals the opening around the dishwasher's detergent/rinse-aid dispenser, helping prevent leaks and moisture intrusion so the dispenser operates reliably throughout the wash cycle.

  • Seals the dispenser passage to keep water from leaking into or out of the dispenser cavity
  • Helps ensure proper detergent or rinse-aid dispensing
  • Can reduce moisture-related corrosion or staining in the dispenser area
What's included: One dispenser grommet Install notes:
  • Disconnect power and turn off water before servicing
  • Remove inner door panel to access the dispenser assembly
  • Note grommet orientation; seat fully to ensure a watertight seal
  • Inspect surrounding surfaces for debris or damage before reassembly

Do-It-Yourself Stories from Customers like You Water leakage bottom right of dishwasher door   David D. • Venice , FL • November 20, 2014

After discovering your web site and reading of others issues I ordered a door seal (my old one was a little short on the right side) a detergent door grommet, and the 2 water deflectors ( I decided to cover all the bases while I was at it. Very simple job with the information provided on your web site. I certainly have the confidence to tackle other appliance repair now. Read more

More
$45.75
Compare At:
$54.90
You Save:
$9.15

IN STOCK
Ships Today Guaranteed
Add to Cart
O-Ring Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP910934

This O-ring seal fits into a groove to create a tight, leak-resistant barrier where two parts join. Replacing a worn O-ring helps stop drips at connections and keeps your appliance running reliably. What it does:

  • Forms a compressible seal between mating parts (fittings, housings, or tubing)
  • Helps prevent water or fluid leaks at joints
  • Maintains proper pressure and flow within the sealed path
  • Replace if you see seepage at the connection or the ring is cracked, flattened, brittle, or swollen
What's included:
  • 1 O-ring seal
Install notes:
  • Disconnect power and shut off water supply before servicing
  • Clean the groove and mating surfaces; remove debris that could compromise the seal
  • Lightly lubricate with manufacturer-approved silicone grease; avoid petroleum-based products
  • Seat the O-ring without twisting; reassemble carefully and check for leaks after testing

This part fixes the following symptoms
  • Not cleaning dishes properly
  • Leaking
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You There were two problems one of the spring links on the door broke which meant the door would free fall when opened unless you held on to it also the lower bearing on the motor virtually seized up   Randall B. • Moab , UT • January 14, 2017

I first wanted to get the dishwasher running, before ordering the spring links. So I disassembled the pump / motor assembly to determine the reason the motor would not start. My wife cleaned all of the parts in the pump assembly. I took the motor apart and discovered that the lower bearing ( a sleeve type bearing) was dry and dirty, and was the culprit for the motor seizing. I cleaned up the bearing and lubricated it with SAE 20W. I also packed felt inside the cavity adjacent to the bearing.... Read more

More
$3.65
Compare At:
$4.46
You Save:
$0.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Tub Wheel
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY912798

The Tub Wheel supports and guides the washer's tub assembly on its base during wash and spin cycles. Replacing a worn wheel restores smoother, quieter operation and helps reduce vibration and rubbing as the machine operates.

  • Provides rolling support so the tub can move and self-balance during cycles
  • Reduces friction between the tub and the base/frame
  • Helps keep the tub centered to minimize noise and vibration
  • Failure symptoms include squeaking or grinding, scraping noises, dragging movement, or visible flat spots/cracks on the wheel
What's included: 1 tub wheel Install notes:
  • Disconnect power and water supply before servicing; wear appropriate gloves and eye protection
  • Access the base/suspension per the service information and support the tub to remove load from the wheel
  • Remove the retainer/axle, install the new wheel, and free rotation and correct orientation
  • Reassemble, level the appliance, and run a spin test to check for noise and balance

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (8-18 X 0.625 In)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489491

This replacement screw secures appliance panels, brackets, and components. Using the correct size restores a snug fit to reduce vibration, prevent loosening, and keep assemblies properly aligned during operation. What it does:

  • Fastens sheet metal and component brackets in designated locations
  • Replaces missing, stripped, or corroded hardware
  • Helps eliminate rattling and vibration from loose panels
  • Maintains proper alignment of covers and assemblies
What's included:
  • 1 screw
Install notes:
  • Disconnect electrical power; shut off water or gas supplies if applicable
  • Match length/thread to the original; replace one fastener at a time to preserve alignment
  • Start by hand to avoid cross-threading; use the correct driver size
  • Snug firmly but do not overtighten to prevent stripping

Do-It-Yourself Stories from Customers like You 15 year old refrigerator door handle broke   Martine G. • Everett , WA • March 30, 2015

I watched a 3 minute video on You Tube on how to replace a refrigerator door handle and it took me 3 minutes to replace mine. Super easy! Read more

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002917

Specs: No.8X1/2 HEX WASHER HEAD

Do-It-Yourself Stories from Customers like You Control board shorted out during drying cycle with a series of loud popping noises creating a blackened corner of the dishwasher door a pungent electircal fire smell and tripped circuit breaker   Charles L. • Concord , MA • November 01, 2014

Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more

More
$7.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Twin Wheel Caster
Genuine Whirlpool part
By: Whirlpool
Part Number: WP903297

This twin-wheel caster replaces a worn or broken wheel on compatible portable appliances and carts, restoring smooth rolling and easier repositioning. A fresh caster helps improve stability and reduces dragging that can scuff floors.

  • Supports the unit's weight and lets it roll for cleaning or repositioning
  • Twin-wheel design helps distribute load and track smoothly
  • Common signs of failure: cracked or missing wheel, caster won't swivel, flat spots, unit hard to move or sits unevenly
  • Replacing damaged casters reduces wobble and noise when rolling
What's included: One twin-wheel caster Install notes:
  • Disconnect power and shut off water. Empty the unit as needed before moving.
  • Carefully tip or elevate and support the appliance to access the caster; use a helper to avoid injury.
  • Remove the retaining fastener/clip, transfer any spacers, and install the new caster in the same orientation.
  • After installation, verify all casters are seated, the unit rolls smoothly, and it sits level.

Do-It-Yourself Stories from Customers like You Broken caster wheel on portable dishwasher   Pamela D. • El Cajon , CA • January 03, 2015

The part came next day! I was shocked at how fast the shipping was. I turned the dishwasher on its side used a pair of pliers and a rubber mallet to get the old wheel off( was not easy) once it was off I had to get the plastic off the new wheel , and that was really hard took some elbow grease but finally after about 10 mins I got it off and simply pushed in the new wheel and used the rubber mallet to secure it and my dishwasher now rolls around like new. Read more

More
$11.95
Compare At:
$14.22
You Save:
$2.27

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store