Maytag Pye/G4500 Parts

This is a black replacement handle for the freezer door that restores a secure grip and original appearance. It provides a simple exterior swap to replace a cracked, loose, or missing freezer door handle. What it does:

• Provides a sturdy grip to open and close the freezer door
• Restores appearance when the original handle is cracked, broken, or missing
• Mounts to the freezer door using the existing handle fasteners for a direct-fit replacement
• Helps prevent further damage from using makeshift grips

• Basic hand tools (screwdriver or Torx) are typically required; confirm fastener type before starting
• Remove food and any door-mounted items to access mounting screws easily
• Align handle to existing holes and tighten fasteners securely but avoid over-tightening

The Freezer Fan with Felt is an OEM replacement part for GE refrigerators. It is designed to fit in the freezer compartment, to circulate cold air and maintain a consistent temperature throughout the freezer. This fan ensures proper airflow, preventing the formation of frost and ice buildup. The felt helps reduce noise and vibration, providing a quieter and smoother operation.

A bad freezer fan can occur due to various factors, including normal wear and tear, motor failure, or damage to the fan blades. If you notice symptoms such as unusual noises, reduced cooling performance, or frost accumulation in the freezer, it may indicate a need to replace the freezer fan with felt.

Symptoms of a bad freezer fan include:

• Unusual noises coming from the freezer
• Reduced cooling performance
• Frost accumulation in the freezer

Restore your refrigerator's freezer compartment by replacing the faulty freezer fan with felt using this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Crossbar Pinion is an OEM part for GE refrigerators. This pinion is designed to fit the crossbar assembly in your freezer drawer, allowing for smooth sliding motion.

A bad crossbar pinion can be caused by normal wear and tear over time, excessive force applied to the drawer, or damage due to mishandling or impact. If you notice difficulties in opening or closing your freezer drawer, a loose or wobbly drawer, or if the drawer gets stuck, it may indicate a problem with the crossbar pinion.

Symptoms of a bad crossbar pinion include:

• Freezer drawer not sliding smoothly
• Drawer sticking or getting jammed
• Excessive play or wobbling in the drawer when opened or closed
• Unusual noises coming from the drawer mechanism

Replace your faulty crossbar pinion with this genuine OEM part to restore your freezer drawer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Specs: No.8X1/2 HEX WASHER HEAD

This SCR is a solid-state switching module that controls on/off power flow in select appliance circuits. Replacing a failed SCR helps stop intermittent operation and restores reliable switching for affected motors or heating elements. What it does:

• Regulates electrical switching in the control circuit to turn motors or heaters on and off.
• Used where a solid-state switch is required for smooth, repeatable control.
• Symptoms of a failing SCR: appliance won't start, runs intermittently, hums without operating, or a controlled circuit does not respond.
• Restores proper switching when the original SCR is shorted, open, or erratic.

• Disconnect power to the appliance before beginning service; follow lockout/tagout procedures.
• Handle as an electronic component—avoid static discharge and protect the spade terminals from bending or contamination.
• Ensure correct orientation and secure mounting; reconnect wiring exactly as shown on the appliance wiring diagram.

This ice maker feeler arm senses the ice level in the bin and controls when the icemaker starts and stops. Replacing a bent, missing, or stuck arm restores correct shutoff and helps prevent overfilling or no-ice conditions.

• Monitors the ice bucket level and raises/lowers to start or stop ice production
• Shuts the icemaker off when the bin is full; allows production when lowered
• Common symptoms: ice maker won't stop making ice/overflows, no ice when the arm is stuck up, loose or missing arm
• Restores proper on/off control of the icemaker cycle

• Disconnect power and turn off the water supply before servicing
• Remove the ice bin and, the icemaker assembly to access the arm
• Transfer any reusable hardware; seat the arm fully in its pivot points so it moves freely
• Restore power, lower the arm to the On position, and allow time for the icemaker to cycle

An adjustable leveler that supports and raises or lowers the appliance to help stabilize it on uneven floors. Restores proper alignment to reduce rocking, vibration, and door misalignment for improved performance and safety. What it does:

• Provides height adjustment to level the cabinet and prevent rocking
• Helps doors close and seal correctly by correcting leaning or unevenness
• Reduces vibration and movement that can cause noise or wear
• Simple turn-to-adjust design for fine tuning appliance position

• Unplug the appliance (and shut off water supply for units with plumbing) before working nearby
• Support the appliance when adjusting so it does not tip; use a helper or appliance dolly as needed
• Turn the leveler by hand or with a wrench; adjust both front/back or left/right sides evenly and re-check with a level

8-18 CA HX 1/2 S

This felt tape is used in the refrigerator to cushion and seal mating parts, helping reduce vibration/squeaks and prevent chafing or small air leaks. Replace worn or missing tape to restore a quieter, more secure fit of covers and ducts.

• Provides a soft barrier between panels, ducts, or rails to minimize vibration and squeaks
• Helps seal minor gaps to support proper airflow paths
• Replaces deteriorated, compressed, or missing original felt tape
• Common symptoms include rattling/buzzing from covers or panels, squeaking drawers, or a loose cover that won't seat correctly

• Disconnect power to the refrigerator before servicing
• Note the original tape's location; remove the old tape and any residue
• Clean and dry surfaces thoroughly; apply the new tape in the same position (peel liner if adhesive-backed)
• Do not block vents, sensors, or fastener holes when applying

The Tri Dummy Valve Water Filter Module Assembly is an OEM component specifically designed for GE bottom-freezer refrigerators. This assembly includes a water filter, mounting brackets, and all necessary fittings.  

It installs within the fresh food compartment and connects the external water source to the internal dispenser system. Filtration protects appliance components while delivering clean, purified water on demand to the door spigot.

Proper filtration is vital for appliance performance and safe drinking water. Causes of failure could include mineral deposits clogging the porous filter media over time.

Symptoms of a faulty assembly include:

• Change in water taste, smell, or color  
• Pressure loss impacting water flow at the dispenser
• Leaks from poorly sealed connections

This OEM GE replacement restores the refrigerator's inherent water treatment role. Install it to supply pure H2O for years while safeguarding your GE appliance's plumbing. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Size: 10-24 x 3/8 inch.

Size: 10-32

This hinge-mounted refrigerator door stop limits how far the door swings open, protecting the cabinet and nearby walls from impact. Replace a cracked or missing stop to restore a controlled, factory door swing and prevent overextension.

• Mounts on the door hinge to control the door's opening range
• Helps prevent the door or handle from striking adjacent walls or cabinets
• Common symptoms: door opens past its normal range, broken/missing stop, visible wear at the hinge stop
• Often needed after an impact or when the original stop cracks from fatigue

• Disconnect power; turn off water to the door if applicable
• Support the door before loosening hinge fasteners; door removal may be required on some models
• Install the stop on the correct hinge location (right or left as required) and tighten hardware securely
• Verify door swing and clearance before fully loading shelves

This water filter cover assembly secures the refrigerator's water filter cartridge and helps direct filtered water into the dispenser/ice system, restoring proper filter seating and reducing the risk of leaks or poor water flow. What it does:

• Secures and retains the water filter cartridge in its housing
• Seals the filter area to help prevent water leaks around the filter
• Directs filtered water from the cartridge into the dispenser and ice system
• Helps restore proper filter engagement when the original cover is cracked or broken

• Turn off water supply and remove power to the appliance before servicing
• Remove the old cover and verify filter type/orientation before installing the new cover
• Push the cover into place until the filter seats and locks per the appliance design
• Re-check alignment and seals; replace damaged gaskets as needed

This deli control PCB with overlay replaces the electronic control used to operate a refrigerator's deli drawer, restoring user input and display functions so the drawer can regulate temperature and respond to controls. What it does:

• Provides the control logic and interface for the deli drawer functions and display
• Responds to user inputs from the overlay buttons or touchpad
• Sends/receives signals to the main refrigerator control for temperature management
• Commonly replaces a board when deli controls are unresponsive, display is blank, or buttons fail

• Disconnect power to the appliance before beginning any service
• Handle the board by edges and avoid touching circuit contacts; observe ESD precautions
• Reassemble trim and panels carefully; test functions before finishing