Medb0yw0 Parts

This self-drilling screw secures appliance panels and components where a fastener must cut its own pilot hole. It provides a quick, reliable hold for repair or reassembly of trim, brackets, and internal fixtures. What it does:

• Fastens panels, brackets, and small components without pre-drilling
• Helps stop loose or rattling trim and parts caused by missing or worn screws
• Restores proper alignment and secure mounting after repairs
• Works where sheet metal or thin substrates require self-tapping engagement

• One self-drilling screw

• Disconnect power and follow appliance safety procedures before starting repairs
• Use the correct size driver and steady pressure to avoid stripping the head
• Start straight and apply firm, even torque; avoid overtightening which can damage mounting surfaces
• Wear eye protection and handle small fasteners carefully to avoid loss or ingestion hazards

This electronic control board manages the dryer's user interface and cycle functions so the appliance starts, times, and runs selected cycles reliably. Replaces a failed console control to restore normal electronic control operation. What it does:

• Receives inputs from the console and selector switches and sends commands to the dryer's components
• Controls cycle timing, temperature selection, and start/stop functions
• Commonly replaced when the dryer won't start, displays error codes, or cycles don't advance
• Helps resolve intermittent operation, unresponsive buttons, or incorrect cycle behavior

• 1 electronic control board

• Disconnect power before servicing to avoid shock; verify power is off at the breaker
• Handle the board by its edges and avoid contact with component leads to prevent damage from static or oils
• Inspect and reconnect all wiring harnesses and connectors firmly; ensure correct orientation before reassembly

The Power Cord is an OEM component specifically designed for Whirlpool electric dryers. Extending from the rear of the unit, the durable cord safely channels the high current needed for power cycles and airflow. With a heat-resistant jacket and contact plug construction, the cord withstands ambient temperatures well beyond its warranty. 

Causes of a bad power cord involve flex fatigue through repeated positioning and weakening internal wires. Normal drying heat cycles may degrade insulating layers.

Symptoms of a bad power cord include:

• Intermittent function or failure to start due to loose connections
• Tripped circuit breaker following appliance connection  
• Buzzing or humming issuing from cord during use

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Amana, Roper, and Admiral dryers. 

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

This lower cabinet base replaces a worn or damaged support panel that stabilizes the appliance and houses lower components. Restoring the base improves cabinet alignment and helps prevent vibration and under-cabinet damage. What it does:

• Supports the appliance frame and internal components to maintain proper alignment
• Protects lower access areas from debris and moisture
• Reduces vibration and rocking caused by cracks or breaks in the original base
• Common symptom: appliance sits unevenly, wobbles, or has visible cracks or separation at the bottom edge

• Disconnect power (and gas if applicable) before beginning any repair
• Support the appliance to prevent tipping or movement when removing panels
• Remove lower access panels and fasteners to replace the base; keep hardware for reuse

A replacement mounting bracket that secures internal components and restores proper alignment for affected appliance assemblies. Replaces a worn or damaged bracket to stop movement and reduce noise caused by loose parts. What it does:

• Provides a stable mount point for internal panels or components to keep assemblies aligned.
• Stops rattling, vibration, or misalignment caused by a broken or bent bracket.
• Restores proper fit and spacing where the original bracket has failed.
• Helps prevent further wear to adjacent parts by keeping components secure.

• Disconnect power and/or gas supply before accessing internal parts.
• Basic hand tools required; follow the appliance service manual for correct removal and installation steps.
• Handle sharp sheet-metal edges carefully and wear gloves and eye protection.

This retainer clip secures small appliance components in place to prevent movement and ensure proper alignment for reliable operation. It's a simple replacement that restores lost or broken mounting support. What it does:

• Holds and stabilizes the attached component or assembly to prevent shifting during use
• Maintains proper alignment for connected parts to reduce wear and noise
• Commonly used where a small plastic or metal clip is needed for secure mounting
• Can address symptoms like loose panels, rattling, or parts that won't stay seated

• One retainer clip

• Disconnect power to the appliance before attempting any repair
• Remove surrounding panels as needed to access the clip; small trim tools may help
• Replace the broken retainer with the new clip and verify the secured component is seated correctly

This OEM part is a control board for washers. The control board is the main computer that controls the essential functions of the washer. If the washer is not rinsing, draining, or spinning properly, or does not turn on, it might mean it's time for a new board. Luckily replacing the control board is a relatively simple process.First, make sure to unplug the washer and pull it out to gain access to the back. Remove the upper back panel and locate the washer's control board. Take note of the orientation of the wires with a phone camera. Disconnect the wire harness and remove the individual wires off the old control board. Re-insert the wires into their correct terminals on the new control board. Snap the new unit back into its original place. Reinstall the upper back panel and move the washer back in place. This genuine replacement OEM control board is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers. It is sold individually.

The control board is an OEM component designed for Whirlpool dryers. It is the control and electronic board that oversees all functions of the dryer. The control board ensures the correct sequencing of components like the motor, heating element, thermostat, and timer during each cycle.

Symptoms of a bad control board can include:

• The dryer not powering on or starting
• Failure to select or maintain cycle settings 
• Improper drying times or temperatures
• Error codes displayed

Causes of damage can be due to moisture intrusion, impact or dropping, or normal component wear over many uses. Voltage fluctuations could also cause failures in electronic parts.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This coupler connects the washer motor to the gearcase so the motor can turn the transmission and drive the washer's agitator and spin functions. Replacing a worn coupler restores reliable power transfer and normal wash cycles. What it does:

• Transfers torque from the motor to the gearcase so the washer agitates and spins
• Dampens shock between motor and transmission during load changes
• Worn or broken couplers can cause no-agitate/no-spin, slipping, or loud grinding noises
• Prevents direct metal-to-metal contact that can damage motor or gearcase

• Disconnect power and water supply before starting any repair
• Support the tub or transmission per the OEM instructions before removing the old coupler
• Inspect motor shaft and gearcase input for damage; replace additional parts if scored or worn
• Use basic hand tools; follow OEM diagram for proper alignment and secure fit