Mle20000ayw Parts

This pressure switch senses and signals the washer's water level so the machine fills and cycles correctly. Replacing a failing switch restores accurate water-level sensing for consistent wash performance. What it does:

• Monitors tub water level and signals the control board to start/stop filling.
• Helps the washer advance through fill, agitate, and drain cycles based on detected water height.
• Common symptom: washer overfills, underfills, or fails to advance cycles.
• Works with existing pressure hose and wiring harness to relay air pressure changes.

• Disconnect power and water to the appliance before beginning any work.
• Note and photograph hose and wiring positions before removal to ensure correct reinstallation.
• Inspect or replace the small pressure hose if cracked or clogged; ensure a tight, leak-free connection.

This sliding gear latch replaces the latch gear that secures the appliance door and helps engage the door lock mechanism for normal operation. It restores reliable door latching so cycles can start and run properly. What it does:

• Replaces the sliding gear used by the door latch assembly to engage/disengage the door lock
• Helps restore a door that won't stay closed or won't latch reliably
• Addresses symptoms like a door that won't lock, intermittent latch engagement, or door-related cycle start failures
• Works as a direct-fit internal latch gear when the original is worn or broken

• 1 sliding gear latch

• Unplug the appliance or disconnect power before beginning any repair
• Access may require removing the door panel or latch housing—keep fasteners organized for reassembly
• Install the part in the same orientation as the original; verify smooth movement of the latch mechanism before reassembling

This replacement axle/latch spring secures the latch/axle assembly so the appliance door or panel stays engaged during use. It restores proper latch tension for reliable closing and operation. What it does:

• Applies tension to the latch/axle so the door or access panel stays closed and latched
• Helps ensure the appliance detects a closed door and will start or run normally
• Common symptom: door won't stay closed or latch feels loose or fails to engage
• Small metal spring designed for a specific latch assembly — not a universal part

• Disconnect power to the appliance before starting any repair
• Access may require removing a panel, bezel, or door — use proper tools and keep fasteners organized
• Handle the spring and latch components carefully; springs are under tension and can snap free

This is a replacement mounting screw used to secure panels, brackets, and internal components on compatible appliances, restoring proper fit and reducing rattles or loose parts. What it does:

• Secures panels, trim, brackets, or internal assemblies
• Stops rattling or vibration caused by missing or loose fasteners
• Replaces a lost or stripped screw to restore proper alignment
• Works as a direct-fit hardware fastener when the OEM screw is damaged or missing

• Turn off and unplug the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid cracking plastic or stripping threads

Size: 8-32 x .312 inch.

This terminal block connects the appliance to household power, providing a secure point for the incoming power cord wires. Replacing a damaged terminal block restores a solid electrical connection and reduces fire risk. What it does:

• Secures and organizes incoming power cord wires to the appliance's internal wiring
• Provides stable electrical contact for consistent power delivery
• Prevents loose or arcing connections that can cause intermittent power or overheating
• Common symptoms: appliance won't power on, intermittent power loss, visible burning or melted plastic at the power entry point

• Disconnect power at the breaker and verify the appliance is de-energized before starting
• Confirm wire placement and tightness; replace any scorched or damaged wiring or connectors
• Use proper tools and follow the appliance wiring diagram; tighten terminal screws to manufacturer torque if specified

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

A small rubber grommet that cushions and secures continuous hinge areas to reduce wear and noise. Replaces a worn or damaged hinge grommet to help maintain smooth door movement and prevent metal-on-metal contact. What it does:

• Cushions the continuous hinge to reduce metal wear and rubbing
• Helps keep hinge components aligned for smoother operation
• Reduces rattling and vibration around the hinge area
• Protects surrounding surfaces from chafing and damage

• Disconnect power (or unplug appliance) before starting any repair
• Inspect the hinge area and mounting surfaces; remove old grommet and clean before installing
• Push grommet into place until fully seated and verify hinge operates smoothly
• If grommet is torn or hardened, replace with the correct part number

This machine control board is the washer's electronic brain, directing the motor, water valves, and cycle timing. Replacing a failed board restores proper control of wash, rinse, and spin functions and helps resolve erratic or non-starting cycles.

• Coordinates cycle timing and sends power to the drive motor, drain pump, and fill valves
• Monitors inputs from the door lock and sensors to manage operation
• Failure can cause the washer not to start, stop mid-cycle, or fail to spin or drain
• Associated with control-related error codes or intermittent operation

• Disconnect power to the appliance before servicing
• Handle the board by the edges and use ESD protection to avoid static damage
• Label or photograph wiring; move connectors to the new board one at a time and verify ribbon-cable orientation
• Mount securely and ensure all harnesses are fully seated before restoring power and running diagnostics per the tech sheet

This 1-1/4" washer is a replacement flat washer used to secure fasteners and distribute load for reliable appliance assembly. It helps maintain proper clamping and prevents bolt/nut damage for stable operation. What it does:

• Sits under a nut or bolt head to spread load and protect mating surfaces
• Prevents fastener loosening caused by vibration or movement
• Reduces wear between joined parts to extend component life
• Helps maintain correct alignment of assemblies where used

• Turn off and unplug the appliance before beginning any repair
• Match this washer to the original by size and thickness to ensure a proper fit
• Use appropriate hand tools and replace any corroded or damaged fasteners at the same time

Includes ball bearing, rear bearing, water deflector, hose clamp, spacer, motor isolator, plug & Lip Seal

This front baffle grommet cushions and secures a dryer's front baffle to reduce vibration and noise while helping keep the baffle properly positioned during operation. Fits select Whirlpool-built dryers. What it does:

• Cushions the baffle to reduce rattling, knocking or squeaking noises during spin
• Holds the baffle in place to prevent movement or rubbing against the drum
• Helps maintain even drum rotation and prevents premature wear of plastic/metal parts
• Can wear or crack with age, causing noise or loose baffle symptoms

• High-level replacement — remove dryer front or access panel;
• Use proper tools and support panels; keep screws and fasteners organized for reassembly
• Disconnect power (and gas if applicable) before starting work