Mvw6330hw3 Parts

Kit contains two 10 feet inlet hoses.

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

• Covers small chips, nicks and surface scratches to improve appearance
• Helps protect exposed metal from moisture and surface corrosion after damage
• Provides a precise application for targeted repairs on doors, panels and trim
• Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)

• Clean and dry the repair area; remove loose paint and corrosion before applying
• Shake bottle well and apply sparingly with included applicator or a small brush
• Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
• Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

The Lid is an OEM part for Whirlpool washers. This assembly provides a secure top closure, preventing any water splashing during the wash and spin cycles.  

A bad washer lid assembly can occur due to regular wear and tear, accidental damage, or malfunctioning lid switch. If you notice symptoms such as the lid not closing properly, the washer not starting or stopping mid-cycle, or water leaking from the top of the washer, it may be time to replace this part.

Symptoms of a bad washer lid assembly include:

• Lid not closing properly
• Washer not starting or stopping mid-cycle
• Water leaking from the top of the washer

Restore your Whirlpool washer by replacing the worn or damaged washer lid assembly with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

A U-bend retainer designed to secure a U-shaped heating element or tubing in place, preventing movement and vibration for reliable operation. Fits as the replacement hold-down clip used on compatible Whirlpool HVAC and appliance assemblies. What it does:

• Secures U-shaped element or tubing to the appliance frame or mounting bracket
• Prevents rubbing or vibration that can lead to wear or noisy operation
• Helps maintain proper spacing and alignment of the element for consistent performance
• Used where a compact, U-shaped clamp is required to hold components safely

• One U-bend retainer clip as shown

• Inspect the surrounding area and replaced part for damage before installing
• Use basic hand tools; align clip over the U-bend and fasten to the designated mounting point
• Disconnect power and allow components to cool before attempting repair
• Replace with the exact OEM fasteners

This left-side door hinge restores proper door alignment and smooth opening on compatible refrigerators. It supports door movement and helps maintain a tight seal for reliable cooling performance. What it does:

• Replaces a worn or bent left door hinge to stop uneven door sag and scraping
• Helps restore correct door alignment for even closing and improved seal
• Reduces noise and binding when opening or closing the door
• Compatible with VMax-style hinge mounting; used where hinge geometry matches OEM design

• One left-side door hinge

• Mounting hardware may be required; confirm included items before beginning
• Disconnect power and empty door bins as needed for safe access
• Support the door during removal/installation to prevent damage or injury

This replacement brace reinforces appliance cabinet structure to restore proper alignment and reduce vibration. It helps maintain secure mounting of adjacent panels so doors and controls operate smoothly. What it does:

• Provides structural support for the appliance cabinet and connected panels
• Reduces rattling or vibration caused by loose or bent cabinet components
• Helps realign panels that are pulling away or not closing flush
• Useful when visible damage, bending, or missing support causes fitment issues

• Disconnect power and, if applicable, gas supply before starting any repair
• Remove outer cabinet panels or access panels to reach the brace mounting points
• Retain original fasteners when possible; replace damaged screws or clips as needed

This tub cover is the OEM replacement panel that fits the VMax 2.0 4.8 tub assembly. It protects internal components and restores the tub's original fit so the washer operates quietly and reliably. What it does:

• Covers and protects the tub opening and internal components from debris and wear
• Helps maintain correct spacing and alignment of the tub assembly
• Reduces rubbing and vibration-related noise caused by a damaged or missing cover
• Supports proper water containment around the tub area

• One tub cover

• Disconnect power and water before starting any repair
• Follow the washer's service manual for disassembly and reassembly steps
• Basic hand tools are typically required; avoid forcing parts to prevent damage

This is a 10-32 threaded stainless steel screw used to fasten components in compatible Whirlpool appliances. Its corrosion-resistant finish helps maintain a secure connection and long-lasting hold where a small machine screw is required. What it does:

• Fastens panels, brackets, or hardware using a 10-32 machine thread
• Stainless steel construction resists rust and corrosion in humid appliance environments
• Small .276 in length is for shallow mounting applications or thin materials
• Helps stop loose parts that can cause noise, vibration, or poor panel fit

• Use the correct 10-32 driver and avoid over-torquing to prevent strip or damage
• Disconnect power to the appliance when accessing internal components
• Wear eye protection and follow OEM service instructions for safe repairs

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

This 3-coil dispenser wiring harness connects the dispenser controls to the refrigerator's dispenser and ice/water components, restoring reliable electrical signals for proper dispenser operation. It replaces damaged or worn dispenser wiring. What it does:

• Provides three insulated conductors to route power and signals between the dispenser control and dispenser components
• Restores interrupted dispenser function when wires are broken, frayed, or connectors are loose
• Helps eliminate intermittent dispenser operation or non-responsive dispenser buttons
• Prevents short circuits caused by exposed or pinched wiring when installed correctly

• One 3-coil dispenser wiring harness with factory-style connectors

• Disconnect power to the appliance before starting any repair
• Access may require removing the dispenser housing or interior panels; keep fasteners organized
• Match connector shapes and pin counts; do not force connectors to mate
• Inspect adjacent wiring and secure the harness away from sharp edges or moving parts

This UI mounting harness secures and connects the user interface to the appliance's control system, restoring reliable button/board communication and keeping the display/control assembly properly positioned. Designed for VMAX 2.0 UI assemblies. What it does:

• Routes and secures UI wiring so buttons, lights and the display communicate with the control board
• Prevents strain or chafing on UI connector wires that can cause intermittent or failed controls
• Helps eliminate loose or sagging control assemblies and related operational issues
• Works with VMAX 2.0-style user interface assemblies to maintain proper alignment and connection

• Disconnect power before starting any repair to avoid shock or damage
• Handle connectors and ribbon cables gently to avoid bending pins or damaging flex circuits
• Verify connector seating and secure the harness mounting points per OEM guidance

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

Color: Grey