Mvwc465hw3 Parts

The Inner Tub Ring Assembly is an OEM part for Whirlpool washers. This assembly serves as a protective barrier between the inner tub and the outer tub, providing support and stability during the washing process.

A bad inner tub ring assembly can be caused by damage, wear and tear, or improper installation. If you notice excessive movement or wobbling of the inner tub, water leakage, or unusual noises during the wash cycle, it may indicate a problem with the inner tub ring assembly.

Symptoms of a bad inner tub ring assembly include:

• Excessive movement or wobbling of the inner tub during operation
• Water leakage from the area where the inner tub and outer tub meet
• Unusual noises during the wash cycle
• Visible cracks or damage on the inner tub ring assembly

Replace your faulty inner tub ring assembly with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Washplate is an OEM part for Whirlpool washers. Located inside the washer tub, the washplate works together with the basket to agitate clothes during wash cycles. 

Causes of a bad washplate can include cracks, mineral deposits that clog holes, or excessive wear over time.

Symptoms of a bad washplate include:

• Inefficient or ineffective agitation of clothes
• Long wash times even on light soil levels
• Standing water in the bottom of the tub after spins
• Reduced water pressure during fill cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Lid is an OEM replacement part for Whirlpool washing machines. It is the top cover of the washer that provides access to the interior drum and tub, allowing you to load and unload laundry. The lid is designed to be durable and secure, ensuring safe and proper operation of the washing machine.

Symptoms of a bad Lid include:

• Difficulty opening or closing the lid
• Lid not closing or latching properly
• Visible cracks or damage to the lid material
• Lid becoming detached or falling off

Causes of a bad lid can range from physical damage due to impact or mishandling, to wear and tear over time from repeated use. Exposure to excessive moisture or humidity can also contribute to the degradation of the lid material or mounting mechanisms.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

The Control Board is an OEM part for Whirlpool washers. It is responsible for controlling and coordinating various functions and cycles.

A bad control board can be caused by electrical malfunctions, power surges, or component failure. If you experience issues such as the washer not starting, unresponsive controls, or error codes appearing on the display, it may indicate a problem with the control board.

Symptoms of a bad control board include:

• Washer not starting or powering on
• Unresponsive or non-functional controls
• Error codes displayed on the control panel

Replace your faulty control board with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This rubber pad cushions and protects appliance components from vibration and abrasion, reducing noise and wear. It's a small replacement part that restores proper contact and dampening where original pads have worn or fallen off. What it does

• Cushions panels or components to reduce vibration and rattling
• Prevents direct metal-to-metal contact that can cause scratching or wear
• Helps stabilize parts that have shifted due to a missing or damaged pad
• Commonly replaced when noisy operation or visible pad deterioration occurs

• One replacement pad

• Disconnect power before accessing interior panels or components
• Remove any retaining clips or panels that block the pad's location; pad typically presses into place
• Verify orientation and seating against the mating surface; replace any worn fasteners or retainers
• If adhesive was used on the original, use an OEM-recommended adhesive only.

This replacement wire harness connects and routes electrical signals between components so your appliance can operate safely and reliably. It restores proper wiring paths and helps resolve intermittent power or control issues. What it does

• Re-establishes factory wiring connections between control components and powered parts
• Restores signal and power flow to eliminate intermittent operation or non-responsive controls
• Replaces damaged, frayed, or burned wiring that can cause shorts or electrical faults
• Helps prevent arcing and improves electrical reliability when installed correctly

• Disconnect power before inspecting or replacing the harness to avoid shock or damage.
• Verify routing and connector orientation match the original harness; secure with existing clips or ties.
• Inspect mating connectors and terminals; replace or repair any that are corroded or damaged.

This wire harness routes power and signals between the appliance control and components to restore reliable electrical connections. It replaces a worn or damaged harness to help stop intermittent operation and restore proper control response. What it does:

• Provides factory-style wiring for control circuits and component connections
• Restores lost or intermittent power/signal paths caused by frayed or broken wires
• Helps correct symptoms such as failure to start, intermittent operation, or unresponsive controls
• Maintains proper connector pinout and secure connections for safe operation

• One wire harness assembly as shown

• Disconnect all power before beginning any service to avoid shock or injury
• Label or photograph connections before removal to ensure correct reconnection
• Route harness free of pinch points, heat sources, and moving parts; secure with existing clips or ties
• If connectors or terminals are damaged, replace them or the entire harness; verify good ground continuity after installation

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.