Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.
You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.
Symptoms of a bad upper arm spray assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more
The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.
Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.
Symptoms of a bad Upper Spray Arm Bearing include:
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Door Interlock Switch Assembly is an OEM part for GE dishwashers. It is designed to ensure the dishwasher door is securely closed before the wash cycle begins, preventing leaks and ensuring the appliance operates safely.
Causes of a bad interlock switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch or its housing. A malfunctioning switch can prevent the dishwasher from starting or cause it to stop mid-cycle.
Symptoms of a bad door interlock switch assembly include:
I found out that the door interlock switch was the usual culprit to my dishwasher not working properly and that replacing it will probably fix the problem. I ordered the part from AppliancePartsPros and the part was delivered the next day. I replaced the part in less than 30 minutes and the dishwasher was as good as new. I am impressed with the information provided on your website and that you were able to ship out on the day I ordered it. Your price is great and the part I received was in... Read more
The Upper Dishrack Stud and Roller Assembly is an OEM replacement part for GE dishwashers. This assembly is an integral component that supports the upper dishrack during dishwashing cycles. This dishwasher upper rack roller includes the axle for mounting.
Symptoms of a bad upper dishrack assembly include:
Causes stem from normal wear over time, as continuous use can degrade guide rollers and mounting studs.
This OEM GE part is compatible with some Hotpoint, RCA, and select Kenmore models.
Finding the replacement parts for my dishwasher was quick and painless. Just use the model number and parts would come up with the diagram and some of the videos. Important to read the Q/A as it helped me to get ready on what I had to do and what tools to have. Ordered replacement parts for my GE dishwasher (about 7 years old). To replace the guide rail brackets, I removed the screws that secured the dishwasher to the counter and pulled out the dishwasher about 1/3 of the depth to have access... Read more
The Latch Assembly is an OEM part for GE dishwashers. This part secures the dishwasher door during operation, ensuring that the door remains tightly closed to prevent water leaks and to allow the dishwasher to operate correctly.
Common causes of a bad latch assembly include wear and tear from regular use, damage from forceful closing or impacts, and issues with the internal mechanism or switches.
Symptoms of a bad Latch Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Hint: take reference image pictures with your smart phone at each step to use when reassembling. HInt: stack 8" of cushions or blankets under open dishwasher door to support when removing screws (and later to hold door up when re-assembling). 1) power off at circuit breaker 2) open door 3) remove and keep track of six small screws and six long screws. Note location of large styrofoam insulation piece for when you put the door back together 4) mark each of the white connectors (black wires)... Read more
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
The GE latch handle is an OEM replacement part responsible for allowing the opening and closing of the dishwasher door. Located on the inner door panel, this part ensures that the dishwasher door latches securely when the machine is in operation, preventing any leaks or disruptions in the cleaning process. Additionally, it provides a convenient means for users to open and close the dishwasher, allowing easy access to load and unload dishes. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. This part fixes the following symptoms
I bought spare part from AppliancePartsPros.com and followed the instructional video. It was easy and saved a few bucks. Read more
This is a door hinge spring that is used on dishwashers. This dishwasher door hinge spring prevents the dishwasher door from dropping open or slamming shut. It allows the movement to be controlled and smooth rather than abrupt and forceful. Each dishwasher unit has two springs at the bottom, one on each side.A new dishwasher door hinge spring may be needed if the dishwasher door is dropping open without any resistance or if it is slamming shut without any resistance. The springs provide tension to prevent these opening and closing concerns, so if that tension is missing, it is time to replace the springs on the dishwasher door.This is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific dishwasher door hinge spring is compatible with dishwashers that are manufactured by the General Electric brand.
Replaced the spring Read more
Color: blue-gray. It measures about 1-1/2 inches in diameter.
Ordered new part on website which arrived within two days - amazing !!! Truly thought we would be waiting for several weeks for replacement - awesome !!! Read more
Dishwasher rack tine clip used to hold the adjustable tines in place. Color: light gray. Measures about 1-1/2 inches wide by 1 inch deep.
Replaced retainer clips. Read more
Ordered parts, waited for them to arrive Took door apart, installed new parts Put door back together shut door (it stayed shut) Washed dishes, opened door (it opened) Dishes were clean (no water on floor) ALL DONE AND IT WORKS Read more
Scr 8-16 b hxw 1.08 ss
Unscrew the sides and pull the dishwasher out and simple remove the old door hinges and put the new one in. Read more
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
I ordered the part from Appliance Parts Pros; it arrived in three working days. I turned off the power and shut off the water to the dish washer, took off the toe guard and unscrewed the appliance from the countertop. I hoped that I could pull the dish washer out from under the counter without disconnecting the water and wiring as I had seen done in the video. Luckily, I didn't have to disconnect them and with a little effort I was able to pull the dish washer out so I could work on it. ... Read more
GE dishwasher started leaking 6 months out of warranty, naturally (buy another brand). Repairman said this model is discontinued, we can't get parts. I found the parts easily on AppliancePartsPros website, and confirmed that they were correct with a simple phone call to a knowledgeable staffer there. Plus they offered a return guarantee, so no risk. Ordered the parts (cheaper than other sites), installed them, and dishwasher works again. I didn't have to shell out for a new one. Yet. Great... Read more