Pdw78000g00ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Flood Switch Assembly

5.0 (7)

By: Ge

Part Number: WD12X10151

The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.

Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.

Symptoms of a bad flood switch assembly include:

The dishwasher not filling with water properly
The dishwasher overfilling or leaking
Error codes related to water levels
The dishwasher not starting or stopping mid-cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not fill with water

Do-It-Yourself Stories from Customers like You Flood switch defective flooded the floor Douglas B. • Portland , MI • January 09, 2017

Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more

Genuine Ge part

Handle, Latch

4.9 (11)

By: Ge

Part Number: WD13X10007

The GE latch handle is an OEM replacement part responsible for allowing the opening and closing of the dishwasher door. Located on the inner door panel, this part ensures that the dishwasher door latches securely when the machine is in operation, preventing any leaks or disruptions in the cleaning process. Additionally, it provides a convenient means for users to open and close the dishwasher, allowing easy access to load and unload dishes.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Difficulty in opening or closing the dishwasher door.
The door not staying securely closed during a wash cycle.
Visible damage to the latch handle.

Do-It-Yourself Stories from Customers like You The handle actuator of my ge dishwasher broke and the spring got lost we could not open/close the unit Arturo R. • Miramar , FL • December 26, 2015

I bought spare part from AppliancePartsPros.com and followed the instructional video. It was easy and saved a few bucks. Read more

Genuine Ge part

Rinse Aid Cap

5.0 (14)

By: Ge

Part Number: WD12X10206

Color: blue-gray. It measures about 1-1/2 inches in diameter.

Do-It-Yourself Stories from Customers like You Rinse cap had become dislodged and fallen by heating coil and melted !!! Richard G. • Lakewood Ranch , FL • April 01, 2016

Ordered new part on website which arrived within two days - amazing !!! Truly thought we would be waiting for several weeks for replacement - awesome !!! Read more

Genuine Ge part

Tine Clip

5.0 (11)

By: Ge

Part Number: WD28X10062

Dishwasher rack tine clip used to hold the adjustable tines in place. Color: light gray. Measures about 1-1/2 inches wide by 1 inch deep.

Do-It-Yourself Stories from Customers like You Dishwasher retainer clips broke Ken J. • Sammamish , WA • April 05, 2015

Replaced retainer clips. Read more

Genuine Ge part

Adaptor Pump Asm

4.8 (5)

By: Ge

Part Number: WD12X10308

Do-It-Yourself Stories from Customers like You Leaking water from underneith William O. • Jurupa Valley , CA • October 12, 2016

Removed dishwasher from it niche, examined the bottom, and found out what parts I needed. Went on line, found Appliance Parts Pro, looked at their video, saw that I could do it, and ordered the parts. When the parts arrived, removed old parts, and inserted new ones. It took longer to remove the dishwasher from it's niche, than to replace the parts. Read more

Genuine Ge part

Handle Retainer

4.9 (8)

By: Ge

Part Number: WD13X10017

Do-It-Yourself Stories from Customers like You Door latch broken Brian M. • Omaha , NE • June 09, 2018

Ordered parts, waited for them to arrive Took door apart, installed new parts Put door back together shut door (it stayed shut) Washed dishes, opened door (it opened) Dishes were clean (no water on floor) ALL DONE AND IT WORKS Read more

Genuine Ge part

Conduit Spray Arm Mid

5.0 (2)

By: Ge

Part Number: WD12X10110

Do-It-Yourself Stories from Customers like You Dishwasher was not cleaning dishes like before when new found crack in upper basket water line feed David G. • Pell City , AL • February 05, 2016

Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more

Genuine Ge part

Upper Spray Arm Screw

5.0 (6)

By: Ge

Part Number: WD02X10068

Scr 8-16 b hxw 1.08 ss

Do-It-Yourself Stories from Customers like You Dishwasher was all gunned up with hard water residue and detergent residue Charles B. • Great Mills , MD • March 14, 2015

I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more

Genuine Ge part

Keeper Latch Asm

5.0 (3)

By: Ge

Part Number: WD13X10066

Do-It-Yourself Stories from Customers like You Door latch Chang J. • Bayside , NY • August 27, 2017

Unscrew the sides and pull the dishwasher out and simple remove the old door hinges and put the new one in. Read more

Genuine Ge part

Pump Seal And Impeller Kit

4.9 (48)

By: Ge

Part Number: WD19X10032

This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

Genuine Ge part

Spring

4.8 (6)

By: Ge

Part Number: WD03X10014

Do-It-Yourself Stories from Customers like You Broken door spring Richard D. • Olympia , WA • October 24, 2015

I ordered the part from Appliance Parts Pros; it arrived in three working days. I turned off the power and shut off the water to the dish washer, took off the toe guard and unscrewed the appliance from the countertop. I hoped that I could pull the dish washer out from under the counter without disconnecting the water and wiring as I had seen done in the video. Luckily, I didn't have to disconnect them and with a little effort I was able to pull the dish washer out so I could work on it. ... Read more

Genuine Ge part

Flapper Check Valve

4.9 (7)

By: Ge

Part Number: WD01X10177

Do-It-Yourself Stories from Customers like You Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

Genuine Ge part

Spray Arm Mounting Hub

5.0 (1)

By: Ge

Part Number: WD12X10391

Do-It-Yourself Stories from Customers like You The middle spinning water device was missing from my dish washer Bernard O. • Englewood , FL • February 23, 2016

I found the manufacturers parts drawing and purchased the parts that were needed.The previous home owner had not only removed from he parts but he had also reversed the direction of the dish rack. The only way I was able to repair it was to figure out how it must function,the rest was easy. Read more

Genuine Ge part

Dishwasher Door Latch Assembly (Dual Switch)

5.0 (1)

By: Ge

Part Number: WD13X10061

This door latch assembly secures the dishwasher door and contains two interlock switches that signal the control when the door is fully closed. Replacing a worn latch restores consistent door engagement so cycles can start and run correctly.

Locks the door closed and keeps it from opening during operation
Houses two micro switches that confirm door-closed status to the control
Common symptoms: dishwasher won't start, needs pressure on the door to run, stops when jostled, or won't latch securely
Restores reliable door closure and proper safety interlock function

What's included: 1 door latch assembly with dual micro switches. Installation notes:

Disconnect power at the breaker before servicing
Remove inner door panel screws to access the latch area
Note wire positions on both switches; move connectors to the same terminals on the new assembly
After installation, verify latch engagement with the door strike and test a short cycle

Do-It-Yourself Stories from Customers like You GE dishwasher wouldn’t turn on cycle Marisol P. • Jupiter , FL • October 05, 2019

Installed the new lock part and it worked !! I have a functioning dishwasher again !!! Read more