Need Help?
Call or text
Routes water from the pump to the middle spray arm in your dishwasher. Replace if cracked, clogged, or leaking to restore proper water delivery to the rack.
Ordered part. 5 minute installation. Problem solved. Thank you. Read more
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.
The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more
Secures hoses to fittings for leak-free operation. Replace when worn or corroded to stop drips on fill, drain, or circulation lines. Confirm fit.
Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more
Leaking during fill or water splashing inside? This dishwasher fill funnel channels incoming water and prevents leaks. Easy DIY replacement project.
Replaced gasket and fill funnel. Read more
Fix leaks around the vent cover with this dishwasher mounting screw. Secures the vent assembly and internal components to prevent water leakage. Quick fix.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
Side-mount bracket kit for securing dishwashers to cabinets when granite or stone countertops prevent top mounting. Includes 2 brackets and 4 screws.
The parts fits perfectly! I side mounted the brackets to the washer tub and then drilled into my cabinets for a tight perfect fit! My dishwasher is no longer falling forward when the drawer is out to load dishes. The best part was the chat! I found and ordered the part on chat. How easy was that?????? Read more
Seals the sump to maintain water pressure and spray effectiveness. Replace if you notice weak spray, poor cleaning, or leaks. Confirm fit with your model.
Although that this is a 10 yrs old appliance, I decided to repair it as it is part of the entire set in the kitchen. I used the tips on the videos at AppliancePartsPros site and was easy to replace the parts and fix. Only the Inlet sump was leaking, but I decided to replace all parts that are made with similar material to avoid further problems. I was a good decision as the pump suction tube was showing signs of start leaking. I would suggest AppliancePartsPros make that kind of suggestion... Read more
Secures dishwasher hoses to fittings and prevents leaks. Replace if corroded, rusted, or loose to restore a watertight seal. Confirm fit with your model.
Changed the water inlet valve for the water problem. To fix the problem of washer running while door was open, took off the front panel and changed the plunger sw interlock and spring which fixed the problem of washer running while door was opened mid wash cycle. Changed the clamp to the discharge hose as it had rusted.Changed keeper latch assembly as it had cracks on the plastic. Read more
Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.
Ordered new GE part through AppliancePartsPros.com. Looked on Youtube for some assistance in how to replace part. This entailed removed outer door cover and removing old touch pad strip. We were surprised how easy this was to do! Time involved less than 20 minutes! Works perfect now. This is an A+ company to order parts from, and their website is so easy to navigate. I ordered the part and it was at my doorstep in two days, packaged extremely secure to protect the genuine GE part. I... Read more
Covers the electrical junction box where the power cord enters your dishwasher. Replace if cracked, broken, or missing to protect wiring connections.
Used your parts. Worked great. Read more
Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.
Ordered the necessary parts to fix it Read more
Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.
I ordered and replaced the 2 possible items that I believed could be the cause. Unit now operates correctly. Read more
Set of 12 dishwasher mounting screws for securing internal components and assemblies. Replace missing, stripped, or corroded screws during repairs.